White Papers

Version 1.3.1 43
AttributeName
AttributeDisplayName
IsReadOnly
Display
Order
PossibleValues
Description
BootToTarget
Boot to iSCSI target
after connection
FALSE
701
“Disabled”,
“Enabled”
Boot to iSCSI
target after
connection
ChapAuthEnable
CHAP Authentication
FALSE
702
“Disabled”,
“Enabled”
CHAP
Authentication
ChapMutualAuth
CHAP Mutual
Authentication
FALSE
703
“Disabled”,
“Enabled”,
“NONE”
CHAP Mutual
Authentication
IpAutoConfig
TCP/IP Configuration
via Stateful or
Stateless
AutoConfiguration
FALSE
710
“Disabled”,
“Enabled”
TCP/IP
Configuration via
Stateful or
Stateless
AutoConfiguration
IpVer
IP Version support.
FALSE
704
“IPv4”, “IPv6”
IP Version
support.
Modifying this
parameter will
reset all IP-
related fields
IscsiViaDHCP
iSCSI parameters via
DHCP
FALSE
705
“Disabled”,
“Enabled”
iSCSI parameters
via DHCP
TcpIpViaDHCP
TCP/IP configuration
via DHCP
FALSE
709
“Disabled”,
“Enabled”
TCP/IP
configuration via
DHCP
TcpTimestmp
TCP Timestamp
FALSE
708
“Disabled”,
“Enabled”
TCP Timestamp
WindowsHBABootMode
Windows HBA Boot
Mode
FALSE
712
“Disabled”,
“Enabled”
The following table describes the values for the DCIM_NICString of this group. Each of the column
741
headings correspond to a property name on the DCIM_NICString class. The Value Expression column
742
contains constraints on string value formulation. Each of the rows contain the values for the properties
743
listed in the column headings.
744
Table 44 – DCIM_NICString iSCSI General Parameters
745
AttributeName
Attribute
Description
IsReadOnly
Display
Order
MinLength
MaxLength
Value
Expression
DhcpVndorID
Vendor ID for
DHCP
configuration
FALSE
711
0
0
The following table describes the values for the DCIM_NICInteger of this group. Each of the column
746
headings correspond to a property name on the DCIM_NICInteger class. Each of the rows contain the
747
values for the properties listed in the column headings.
748
Table 45 – DCIM_NICInteger iSCSI General Parameters
749
AttributeName
AttributeDisplayName
IsReadOnly
Display
Order
LowerBound
UpperBound