White Papers

14 Version 1.3.0
Property Name
Requirement
Type
Additional Requirements
PCIDeviceID
Mandatory
string
The property shall represent the PCI device
identifier.
PCISubDeviceID
Mandatory
string
The property shall represent the PCI sub device
identifier.
DeviceCardManufacturer
Mandatory
string
The property shall represent the manufacturer
name.
DeviceCardDataBusWidth
Mandatory
uint8
The property shall represent the bus width and
shall be one of the following values:
 0 - Unknown
 1- 8x
DeviceCardSlotLength
Mandatory
uint8
The property shall represent the slot length width
and shall be one of the following values:
 2 – Unknown
 3 – Short
 4 – Long
DeviceCardSlotType
Mandatory
string
The property shall represent the the slot type and
shall be one of the following values:
 Unknown
 PCI Express x8
SecurityStatus
Mandatory
uint32
The property shall represent the controller security
configuration information and shall be one of the
following values:
 0 - Unknown
 1 - Encryption Capable
 2 - Security Key Assigned
ProductName
Mandatory
string
The property shall represent the name of the
controller.
SASAddress
Mandatory
string
The property shall provide unique ID of the
controller and shall be in the form of hexadecimal.
EncryptionMode
Mandatory
uint8
The property shall represent the current encryption
state on the controller and shall be one of the
following values:
 0 - None
 1 - Local Key Management
 2 - Dell Key Management
 3 - Pending Dell Key Management
EncryptionCapability
Mandatory
uint8
The property shall represent the
EncryptionCapability property details possible
encryption states on the controller and shall be one
of the following values:
 0 - None
 1 - Local Key Management Capable
KeyID
Mandatory
string
The property shall represent the KeyId of controller
when controller is in Local Key Management mode.
CachecadeCapability
Mandatory
uint8
The property shall represent the controller’s
support of cachecade virtual disk creation and shall
have one of the following values: