White Papers

22 Version 1.3.0
7.1.4.1 Resource URIs for WinRM
®
408
The class Resource URI shall be “http://schemas.dell.com/wbem/wscim/1/cim-
409
schema/2/DCIM_PhysicalDiskView?__cimnamespace=root/dcim”
410
The key property shall be the InstanceID.
411
The instance Resource URI for DCIM_PhysicalDiskView instance shall be:
412
“http://schemas.dell.com/wbem/wscim/1/cim-
413
schema/2/DCIM_PhysicalDiskView?__cimnamespace=root/dcim+InstanceID=<FQDD>”
414
7.1.4.2 Operations
415
The following table details the implemented operations on DCIM_PhysicalDiskView.
416
Table 9 – DCIM_PhysicalDiskView - Operations
417
Operation Name
Requirements
Required Input
Get
Mandatory
Instance URI
Enumerate
Mandatory
Class URI
7.1.4.3 Class Properties
418
The following table lists the implemented properties for DCIM_PhysicalDiskView instance representing
419
the Physical Disk in a system. The “Requirements” column shall denote whether the property is
420
implemented (for requirement definitions, see section 3). The “Additional Requirements” column shall
421
denote either possible values for the property, or requirements on the value formulation.
422
Table 10 – DCIM_PhysicalDiskView - Properties
423
Property Name
Requirement
Type
Description
InstanceID
Mandatory
string
The property shall have the
same value as the FQDD
property.
FQDD
Mandatory
string
The property shall represent
the Fully Qualified Device
Description that uniquely
identifies the device.
BusProtocol
Mandatory
Uint32
The property shall represent
the bus protocol and shall
have one of the following
values:
 0 - Unknown
 1 - SCSI
 2 - PATA
 3 - FIBRE
 4 - USB
 5 - SATA
 6 – SAS
Connector
Mandatory
Uint16
The property shall represent
the controller port that the
physical disk is connected
to.