White Papers

Version 1.3.0 25
Property Name
Requirement
Type
Description
RollupStatus
The property shall contain
one of the following values:
 0(Unknown)
 1(OK)
 2(Degraded)
 3(Error).
RollupStatus provides a high
level status value, intended
to align with Red-Yellow-
Green type representation of
status.
SASAddress
Mandatory
string
The property shall represent
the SAS address of the
drive.
SecurityState
Mandatory
Uint32
The property shall represent
the security state of the
phycials disk and shall be
one of the following values:
 0 - Unknown
 1 - Secured
 2 - Locked
 3 – Foreign
SerialNumber
Mandatory
string
The property shall represent
the serial number of physical
disk.
SizeInBytes
Mandatory
Uint64
The property shall represent
the coerced (no
configuration data) size of
the physical disk.
Slot
Mandatory
Uint16
The property shall represent
the slot where drive is
located.
SupportedEncryptionTypes[]
Mandatory
Stirng
This property shall represent
the supported encryption
types on the physical disk.
The possible values is
FDE (Full Drive Encryption)
UsedSizeInBytes
Mandatory
Uint64
The property shall represent
the space already
consumed by virtual disks
LastSystemInventoryTime
Mandatory
string
The property shall represent
the last time “System
Inventory Collection on
Reboot (CSIOR)” was
performed. The value is
represented as
"yyyymmddHHMMSS”.
LastUpdateTime
Mandatory
string
The property shall represent
the last time the data was
updated. The value is
represented as
yyyymmddHHMMSS
7.1.5 Controller Battery View - DCIM_ControllerBatteryView
424
This section describes the implementation for the DCIM_ControllerBatteryView class. This class shall be
425
instantiated in the Implementation Namespace: root/dcim.
426