White Papers

Version 1.3.0 27
Property Name
Requirement
Type
Additional Requirements
PredictiveCapacity
Mandatory
Uint32
The property shall be following
values:
0 – Unknown
1 – Ready
6 - Failed
7.1.6 Enclosure Mangement Module View - DCIM_EnclosureEMMView
443
This section describes the implementation for the DCIM_EnclosureEMMView class. This class shall be
444
instantiated in the Implementation Namespace: root/dcim.
445
7.1.6.1 Resource URIs for WinRM
®
446
The class Resource URI shall be “http://schemas.dell.com/wbem/wscim/1/cim-
447
schema/2/DCIM_EnclosureEMMView?__cimnamespace=root/dcim”
448
The key property shall be the InstanceID.
449
The instance Resource URI for DCIM_EnclosureEMMView instance shall be:
450
“http://schemas.dell.com/wbem/wscim/1/cim-
451
schema/2/DCIM_EnclosureEMMView?__cimnamespace=root/dcim+InstanceID=<FQDD>”
452
7.1.6.2 Operations
453
The following table lists the implemented operations on DCIM_EnclosureEMMView.
454
Table 13 – DCIM_EnclosureEMMView - Operations
455
Operation Name
Requirements
Required Input
Get
Mandatory
Instance URI
Enumerate
Mandatory
Class URI
7.1.6.3 Class Properties
456
The following table lists the implemented properties for DCIM_EnclosureEMMView instance representing
457
the EMM in a system. The “Requirements” column shall denote whether the property is implemented (for
458
requirement definitions, see section 3). The “Additional Requirements” column shall denote either
459
possible values for the property, or requirements on the value formulation.
460
Table 14 – DCIM_EnclosureEMMView - Properties
461
Property Name
Requirement
Type
Additional Requirements
InstanceID
Mandatory
string
The property shall have the value
of the FQDD.
FQDD
Mandatory
string
The property shall represent Fully
Qualified Device Description
(FQDD)
PrimaryStatus
Mandatory
uint32
The property shall represent the
status of the device and shall be
one of the following values:
 0 - Unknown
 1 - OK
 2 - Degraded