White Papers

28 Version 1.3.0
Property Name
Requirement
Type
Additional Requirements
 3 - Error
PartNumber
Mandatory
String
The property shall represent the
EMM part number.
Revision
Mandatory
String
The property shall represent the
version of the EMM firmware.
7.1.7 Enclosure Power Supply Unit View - DCIM_EnclosurePSUView
462
This section describes the implementation for the DCIM_EnclosurePSUView class. This class shall be
463
instantiated in the Implementation Namespace: root/dcim.
464
7.1.7.1 Resource URIs for WinRM
®
465
The class Resource URI shall be “http://schemas.dell.com/wbem/wscim/1/cim-
466
schema/2/DCIM_EnclosurePSUView?__cimnamespace=root/dcim”
467
The key property shall be the InstanceID.
468
The instance Resource URI for DCIM_EnclosurePSUView instance shall be:
469
“http://schemas.dell.com/wbem/wscim/1/cim-
470
schema/2/DCIM_EnclosurePSUView?__cimnamespace=root/dcim+InstanceID=<FQDD>”
471
7.1.7.2 Operations
472
The following table lists the implemented operations on DCIM_EnclosurePSUView.
473
474
Table 15 – DCIM_EnclosurePSUView - Operations
475
Operation Name
Requirements
Required Input
Get
Mandatory
Instance URI
Enumerate
Mandatory
Class URI
7.1.7.3 Class Properties
476
The following table lists the implemented properties for DCIM_EnclosurePSUView instance representing
477
the Enclosure Power Supply Unit in a system. The “Requirements” column shall denote whether the
478
property is implemented (for requirement definitions, see section 3). The “Additional Requirements”
479
column shall denote either possible values for the property, or requirements on the value formulation.
480
Table 16 – DCIM_EnclosurePSUView - Properties
481
Property Name
Requirement
Type
Additional Requirements
InstanceID
Mandatory
String
The property shall have the value
of the FQDD.
FQDD
Mandatory
String
The property shall represent Fully
Qualified Device Description
(FQDD)
PrimaryStatus
Mandatory
uint32
The property shall represent the
status of the device and shall be
one of the following values:
 0 - Unknown