White Papers

32 Version 1.3.0
Property Name
Requirement
Type
Additional Requirements
following values:
 0 - Unknown
 1 - OK
 2 - Degraded
 3 - Error
RateUnits
Mandatory
uint16
The property value shall be 0 (None).
SensorType
Mandatory
Uint16
The property value shall be 2
(Temperature).
UnitModifier
Mandatory
sint32
The property shall have the value 0
denoting that the CurrentReading
property value need not be multiplied
by the UnitModifier property value.
SettableThresholds[]
Mandatory
uint16
An array representing the writable
thresholds supported by Sensor.
The property shall be “null” value
since this is read-only sensor
SupportedThresholds[]
Mandatory
uint16
The array property shall have
following values:
 0 - LowerThresholdNonCritical
 1 - UpperThresholdNonCritical
 2 - LowerThresholdCritical
 3 - UpperThresholdCritical
UpperThresholdCritical
Mandatory
sint32
The property shall have upper critical
threshold value in Degree Centigrade.
UpperThresholdNonCritical
Mandatory
sint32
The property shall have upper non-
critical threshold value in Degree
Centigrade.
LowerThresholdCritical
Mandatory
sint32
The property shall have lower critical
threshold value in Degree Centigrade.
LowerThresholdNonCritical
Mandatory
sint32
The property shall have lower non-
critical threshold value in Degree
Centigrade.
530
7.2 Attributes
531
This section details the supported attributes for the storage devices. Not all attributes shall be available
532
depending on the controller model. Each attribute is separate instance of the attribute class. The FQDD
533
property correlates all the attributes to a device instance. Attributes can be set using the SetAttribute()
534
method.
535
NOTE: The RAIDdefaultWritePolicy, RAIDdefaultReadPolicy, and DiskCachePolicy attributes are not
536
applicable for Cachecade Virtual Disk.
537
7.2.1 DCIM_RAIDEnumeration
538
This section describes the implementation for the DCIM_RAIDEnumeration class.
539