White Papers

60 Version 1.3.0
Table 74 – DCIM_RAIDService.RemoveControllerKey() Method: Return Code Values
852
Value
Description
0
Request was successfully executed.
2
Error occurred
Table 75 – DCIM_RAIDService.RemoveControllerKey () Method: Standard Messages
853
MessageID(OUT parameter)
Message
STOR003
Missing parameter
STOR004
Invalid parameter value
STOR006
General failure
STOR007
Resource Allocation Failure
STOR021
Controller Key is not present
STOR022
Controller is not security capable
Table 76 – DCIM_RAIDService.RemoveControllerKey () Method: Parameters
854
Qualifiers
Name
Type
Description/Values
IN, REQ
Target
String
FQDD of of target device (Controller)
OUT
RebootRequired
string
A value of “Yes” means a reboot is required to set this value,
and a value of “No” means a reboot is not required to set this
value
OUT
MessageID
String
Error MessageID is returned If the method fails to execute.
OUT
Message
String
Error Message in English corresponding to MessageID is
returned If the method fails to execute.
855
8.18 DCIM_RAIDService.EnableControllerEncryption()
856
The EnableControllerEncryption() method sets either Local Key Management (LKM) or Dell Key
857
Management (DKM) on controllers that support encryption of the drives.
858
Table 77 – DCIM_RAIDService.EnableControllerEncryption () Method: Return Code Values
859
Value
Description
0
Request was successfully executed.
2
Error occurred
Table 78 – DCIM_RAIDService.EnableControllerEncryption() Method: Standard Messages
860
MessageID(OUT parameter)
Message
STOR0003
Missing parameter
STOR004
Invalid parameter value
STOR006
General failure
STOR007
Resource Allocation Failure
STOR019
Provided passphrase is not valid
STOR022
Controller is not security capable
STOR038
Invalid parameter value for Keyid