White Papers

16 Version 1.2.0
Property Name Requirement Type Additional Requirements
WiredOrder Mandatory Uint8
The property shall represent
the connection sequence in
a daisy chain of enclosures
in the relation to the
controller port (0 for
backplane).
ServiceTag Mandatory string
The property shall contain
up to 10 characters.
AssetTag Mandatory string
The property shall contain
up to 10 characters.
Version Mandatory string
The property shall represent
the EMM version.
SlotCount Mandatory Uint8
The property shall represent
the number of drive slots.
EMMCount Mandatory Uint8
The property shall represent
the number of EMMs
present.
PSUCount Mandatory Uint8
The property shall represent
the number of power supply
units present.
FanCount Mandatory Unit8
The property shall represent
the number of fans present.
TempProbeCount Mandatory Uint8
The property shall represent
the number of temperature
probes present.
ProductName Mandatory string
The property shall represent
the commercial name of the
enclosure.
LastSystemInventoryTime Mandatory string
This property shall provide
the last time “System
Inventory Collection on
Reboot (CSIOR)” was
performed. The value is
represented as
"yyyymmddHHMMSS”.
LastUpdateTime Mandatory string
This property shall provide
the last time the data was
updated. The value is
represented as
yyyymmddHHMMSS
7.1.3 Virtual Disk View - DCIM_VirtualDiskView 381
This section describes the implementation for the DCIM_VirtualDiskView class. This class shall be 382
instantiated in the Implementation Namespace: root/dcim. 383
7.1.3.1 Resource URIs for WinRM
®
384
The class Resource URI shall be “http://schemas.dell.com/wbem/wscim/1/cim-385
schema/2/DCIM_VirtualDiskView?__cimnamespace=root/dcim” 386
The key property shall be the InstanceID. 387