White Papers

36 Version 1.4.0
MessageID (OUT parameter)
Message
MessageArguments[]
SYS014
Invalid AttributeValue for
AttributeName %s
AttributeName
SYS015
Job created
SYS016
Job completed with errors
SYS017
Job failed
SYS018
Job completed
SYS019
Required dependancy input not
found
SYS020
Invalid Required Attribute value
SYS023
No pending configurations
SYS024
Attribute dependency failed
SYS029
Unsupported parameter name
<parameter name>
Parameter Name
JCP017
Maximum job limit reached, cannot
create new jobs
LC062
An instance of Export or Import
System Configuration is already
running.
542
8.4 DCIM_SystemManagementService.DeletePendingConfiguration()
543
The DeletePendingConfiguration( ) method is used to cancel the pending values created by the
544
SetAttribute and SetAttributes methods. The DeletePendingConfiguration( ) method cancels the pending
545
configuration changes made before the configuration job is created with CreateTargetedConfigJob(). This
546
method only operates on the pending changes prior to CreateTargetedConfigJob() being called. After the
547
configuration job is created, the pending changes can only be canceled by calling DeleteJobQueue()
548
method in the Job Control profile.
549
Return code values for the DeletePendingConfiguration( ) method are specified in Table 34, and
550
parameters are specified in Table 35.
551
Table 34 – DeletePendingConfiguration( ) Method: Return Code Values
552
Value
Description
0
Completed with no error
2
Failed
Table 35 – DeletePendingConfiguration( ) Method: Parameters
553
Qualifiers
Name
Type
Description/Values
IN, REQ
Target
String
Shall be equal to “System.Embedded.1”
OUT
MessageID
String
Error Message ID may be used to look-up in
the Dell Message registry files. For more
information, see Error Message Registry.
OUT
Message
String
Error Message
OUT
MessageArguments[]
String
Error MessageArguments