White Papers
Table Of Contents
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Symbols and Abbreviated Terms
- 5 Synopsis
- 6 Description
- 7 Implementation Description
- 7.1 DCIM_SystemView – System View
- 7.2 DCIM_SystemEnumeration – System Enumeration Attributes
- 7.3 DCIM_SystemString – System String Attributes
- 7.4 DCIM_SystemInteger – System Integer Attributes
- 7.5 System Attributes
- 7.6 DCIM_SystemManagementService – System Management Service
- 7.7 System Info Profile Profile Registration
- 8 Methods
- 8.1 DCIM_SystemManagementService.SetAttribute()
- 8.2 DCIM_SystemManagementService.SetAttributes()
- 8.3 DCIM_SystemManagementService.CreateTargetedConfigJob()
- 8.4 DCIM_SystemManagementService.DeletePendingConfiguration()
- 8.5 DCIM_SystemManagementService.ShowErrorsOnLCD()
- 8.6 DCIM_SystemManagementService.IdentifyChassis()
- 9 Use Cases
- 10 CIM Elements
- 11 Privilege and License Requirement
![](/manual/dell/systems-management-solution-resources/87-86-85-84-83-82-81-80-79-78-77-76-75-74-73-72-71-70-69-68-67-66-65-64-63-62-61-60-59-58-57-56-55-54-53-52-51-50-49-48-47-46-45-44-43-42-41-40-39-38-37-36-35-34-33-32-31-30-29-28-27-26-25-24-23-22-21-20-19-18-17-16-15-14-13-12-11-10-9-8-7-6-5-4-3-2-1-white-papers-english/images/img-15.png)
Version 1.2.0 15
Property Name
Requirements
Type
Requirement and Description
SysMemErrorMethodology
Mandatory
uint16
The primary hardware error correction or
detection method supported by the system’s
memory array.
SysMemFailOverState
Mandatory
string
System memory fail over state.
SysMemLocation
Mandatory
uint16
The physical location of the memory array,
whether on the system board or an add-in
board.
SysMemPrimaryStatus
Mandatory
uint32
SystemMemoryPrimaryStatus provides a high
level status value, intended to align with Red-
Yellow-Green type representation of status for
the system memory.
SysMemTotalSize
Mandatory
uint32
The property shall be in Mbytes. The
maximum memory capacity in MB available to
the platform pre-OS and OS to utilize.
SystemID
Mandatory
uint32
System ID describes the model of the system
in integer value. The SystemID property is
usually used to identify the compatibility of the
updateable software/firmware.
SystemRevision
Mandatory
uint16
System Revision describes whether the
platform was the first or second revision of the
corresponding model. The revisions are
usually correlated with an upgrade of the CPU
model in the same platform model.
SystemGeneration
Mandatory
string
The property shall represent the generation of
the platform.
TempRollupStatus
Mandatory
uint32
The property shall contain the temperature
rollup status of all the system components
and shall contain one of the following values:
• 0(Unknown)
• 1(OK)
• 2(Degraded)
• 3(Error).
TempRollupStatus provides a high level
status value, intended to align with Red-
Yellow-Green type representation of status.
UUID
Mandatory
string
UUID uniquely identifies the system. The
property is also known as BIOS GUID.
The UUID value matces the WMI®
representation of the UUID/GUID.
VoltRollupStatus
Mandatory
uint32
The property shall contain the voltage rollup
status of all the system components and shall
contain one of the following values:
• 0(Unknown)
• 1(OK)
• 2(Degraded)
• 3(Error).
VoltRollupStatus provides a high level status
value, intended to align with Red-Yellow-
Green type representation of status.
LastSystemInventoryTime
Mandatory
string
This property provides the last time \”System
\”Inventory Collection On Reboot(CSIOR)\”
was performed. The value is represented as
yyyymmddHHMMSS.