Setup Guide

KeySecure Classic (k150v)
15 Enable OpenManage Secure Enterprise Key Manager (SEKM) on Dell EMC PowerEdge Servers
1.4.3 Configure the Key Management Server (KMS) settings on iDRAC
1. Enter or select data in the fields, and then click Apply.
IMPORTANT—Make sure you already have a user created on the KMS you will be using for key
exchange with the iDRAC. For the user name, ensure it matches the exact value in the CSR certificate
property you selected for the Gemalto KMIP Username field in client certificate Authentication Settings
For example, in the signed CSR Certificate on iDRAC used in this experiment, the Common Name
property is set to “idracuserG1FWHQ2”. On the Gemalto server, in the KMIP Authentication Settings, the
“Username field in client certificate” field is set to “Common Name”. For creating a username on Gemalto,
you must create a user with the name “idracuserG1FWHQ2”. This is the user which iDRAC will be using
for key exchange.
Configure the KMS properties on iDRAC GUI
A message is displayed indicating that a job ID has been created.
2. Go to the Job Queue page and ensure that the job ID is marked as successfully completed.