Setup Guide

Thales Data Security Manager (DSM)
31 Enable OpenManage Secure Enterprise Key Manager (SEKM) on Dell EMC PowerEdge Servers
3.3.2 Ensure SEKM is enabled on iDRAC PERC
1. On the iDRAC GUI, click Storage  Overview.
2. Expand your storage controller and ensure the following statuses:
• Security Status = Security Key Assigned
• Encryption Mode = Secure Enterprise Key Manager
Ensure that SEKM is enabled on your controller
3.3.3 Viewing Key ID on Thales DSM
1. Log in to Thales as an Administrator.
2. Switch to the domain where your keys are being managed.
3. Click Keys  KMIP Objects.
Set up SEKM on Thales
The SEKM setup operation is complete. You can now start creating locked RAID volumes and perform key
exchanges.