Owner`s manual

3. Press the release latch away from the battery to allow the battery to pop-up from the socket. Lift the coin-cell

battery out of the computer.

Installing the Coin-Cell Battery

1. Place the coin-cell battery into the slot on the system board.

2. Press the coin-cell battery downward until the release latch springs back into place and secures it.

3. Install:

a. cover

b. air tunnel (if available)

4. Follow the procedures in

After Working Inside Your Computer

Removing the System Fan

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove:

a. cover

b. intrusion switch

c. PCI card

d. hard drive

e. optical drive

3. Unthread the system-board cable from the latch.