User Guide

Installing the Thermal Sensor

NOTE: The thermal sensor is an optional component and your computer may not ship with it.

1. Connect the thermal sensor to the component that you wish to monitor the temperature, and secure it with the

latch.

2. Connect the thermal sensor cable to the system board.

3. Install the cover.

4. Follow the procedures in

After Working Inside Your Computer

Removing the Hard Drive

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the cover.

3. Remove the hard-drive power supply cable and the hard-drive data cable from the hard drive.

4. Press in on the latches on either side of the hard drive bracket.