User Guide

Table 3. System Configuration

Option Description

Integrated NIC Allows you to configure the integrated

network controller. The options are:

• Disabled

• Enabled (Default Setting)

USB Controller Allows you to control the USB controller. The

options are:

• Enable USB Controller (Default

Setting)

• Disable USB Mass Storage Dev

• Disable USB Controller

Serial Port Identifies and defines the serial port settings.

You can set the serial port to:

• Disabled

• Auto

• COM1 (Default Setting)

• COM2

• COM3

• COM4

NOTE: The operating system may allocate

resources even if the setting is disabled.

SATA Operation Allows you to configure the internal SATA

hard-drive controller. The options are:

• Disabled

• ATA

• AHCI (Default Setting)

NOTE: SATA is configured to support RAID

mode.

USB Configuration Allows you to define the USB configuration.

The options are:

• Enable Boot Support/Front USB Ports/

Rear USB Ports/USB3 Ports

SMART Reporting This field controls if the hard drive errors for

the integrated drives are reported during

system startup. This technology is part of the

SMART (Self Monitoring Analysis and

Reporting Technology) specification.

• Enable SMART Reporting - This option

is disabled by default.