User Manual

Table 14. System setup options—System Management menu (continued)
System Management
Wake on AC Enables the computer to turn on and go to boot when AC power is supplied to
the computer.
Default: OFF
Wake on LAN/WLAN
Wake on LAN/WLAN Enables or disables the computer to turn on by a special LAN/WLAN signal.
By default, Disabled is selected.
Table 15. System setup options—Keyboard menu
Keyboard
Numlock Enable
Enable Numlock Enables or disables Numlock when the computer boots.
Default: ON
Fn Lock Options
Fn Lock Options Enables or disables the Fn lock option.
Default: ON
Lock Mode
Default: Lock Mode Secondary. Lock Mode Secondary = If this option is
selected, the F1-F12 keys scan the code for their secondary functions.
Keyboard Illumination
Keyboard Illumination Configures the operating mode of the keyboard illumination feature.
By default, Bright is selected.
Keyboard Backlight Timeout on AC
Keyboard Backlight Timeout on AC Configures the timeout value for the keyboard when an AC adapter is
connected to the computer. The keyboard backlight timeout value is only
effect when the backlight is enabled.
By default, 1 minute is selected.
Keyboard Backlight Timeout on
Battery
Keyboard Backlight Timeout on Battery Configures the timeout value for the keyboard when the computer is running
on battery. The keyboard backlight timeout value is only effect when the
backlight is enabled.
By default, 1 minute is selected.
OROM Keyboard Access Enables or disables the option to enter Option ROM configuration screens via
hotkeys during boot.
By default, Enabled is selected.
OROM Keyboard Access
Table 16. System setup options—Pre-Boot Behavior menu
Pre-Boot Behavior
Adapter Warnings
Enable Adapter Warnings Enables or disables the computer to display adapter warning messages when
adapters with too little power capacity are detected.
Default: ON
58 BIOS setup