Product Data Sheet / Brochure

Table 3. Dell EMC PowerEdge T440 system PSU specifications
PSU Class Heat dissipation
(maximum)
Frequency Voltage
1100 W AC Platinum 4100 BTU/hr 50/60 Hz 100240 V AC, autoranging
750 W AC Platinum 2891 BTU/hr 50/60 Hz 100240 V AC, autoranging
750 W mixed mode
HVDC (For China
only)
Platinum 2891 BTU/hr 50/60 Hz 100240 V AC, autoranging
240 V DC
495 W AC Platinum 1908 BTU/hr 50/60 Hz 100240 V AC, autoranging
450 W (no longer
offering)
Bronze 1871 BTU/hr
50/60 Hz
100240 V AC, cabled PSU
This system is also designed to connect to the IT power systems with a phase to phase voltage not exceeding 230 V.
System battery specifications
The Dell EMC PowerEdge T440 system supports CR 2032 3.0-V lithium coin cell system battery.
Expansion bus specifications
The Dell EMC PowerEdge T440 system supports five PCI express (PCIe) generation 3 expansion cards.
Memory specifications
Table 4. Memory specifications
DIMM
type
DIMM rank
DIMM
capacity
Single processor Dual processors
Minimum RAM Maximum RAM Minimum RAM Maximum RAM
RDIMM Single rank 8 GB 8 GB 80 GB 16 GB 128 GB
RDIMM Dual rank 16 GB 16 GB 160 GB 32 GB 256 GB
RDIMM Dual rank 32 GB 32 GB 320 GB 64 GB 512 GB
LRDIMM Quad rank 64 GB 64 GB 640 GB 128 GB 1024 GB
Storage controller specifications
The Dell EMC PowerEdge T440 system supports:
Software RAID: S140
Internal controllers: H750, H350, H740p, H730p, H330
Boot Optimized Storage Subsystem (BOSS): HWRAID 2 x M.2 SSDs 120 GB, 240 GB with 6 Gb/s
x8 connector using PCIe Gen 2.0 x2 lanes, available only in the low-profile and half-height form factor.
External controller: HBA355e, H840, 12 Gbps Ext SAS HBA
SAS Hot Bus Adapters: HBA350i, HBA330
NOTE:
The new generation PERC 11 H750, H350, and HBA350i adapters cannot be mixed with the PERC H740P, H730P,
H330, HBA330 adapters of the previous generations in one system.
NOTE: Valid TBU configurations:
HBA330 adapter can be connected to TBU and the PERC H740P, H730P, H330, HBA330 can be connected to the drive
backplane.
6 Technical specifications