Product Data Sheet / Brochure

● HBA350i adapter can be connected to TBU and the PERC H750, H350, HBA350i can be connected to the drive
backplane.
Drive specifications
Drives
The Dell EMC PowerEdge T440 system supports:
● 4x3.5 configuration (no longer offering): Up to 4 SAS or SATA drives/Nearline SAS drives
● 8x3.5 configuration: Up to 8 SAS or SATA drives/Nearline SAS drives
● 16x2.5 configuration: Up to 16 SAS or SATA drives
Optical drive and tape drive
The Dell EMC PowerEdge T440 system supports:
● one optional slim SATA DVD-ROM drive or DVD +/-RW drive
● internal tape drives LTO5, LTO6, LTO7 and external SAS drives.
Your system supports one of the following configurations:
● Systems with cabled drives support one optical drive and one tape drive.
● Systems with hot-swappable drives support up to one optical drive and two tape drives.
Ports and connectors specifications
USB ports
Dell EMC PowerEdge T440 system
Table 5. USB specifications
Front panel Back panel
● One USB 2.0-compliant port
● One USB 3.0-compliant port
● 4 USB 2.0-compliant rear ports
● 2 USB 3.0-compliant rear ports
NIC ports
The Dell EMC PowerEdge T440 system supports two Network Interface Controller (NIC) ports on the back panel each with 1
Gbps configuration.
NOTE: You can install up to five PCIe add-on cards.
VGA ports
The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The Dell EMC PowerEdge T440
system supports one 15-pin VGA ports on the back of the system.
Serial connector
The Dell EMC PowerEdge T440 system supports one serial connector on the back panel, which is a 9-pin connector, Data
Terminal Equipment (DTE), 16550-compliant.
Technical specifications
7