Dell UltraSharp U2419HC/U2719DC Monitor User’s Guide Model: U2419HC/U2719DC Regulatory model: U2419HCt/U2719DCt
NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2018-2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
Contents About Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Identifying Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . 7 Monitor Specifications . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Built-in Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Always On USB Type-C Charging . . . . . . . . . . . . . . . . . . . . . . 54 Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . .
About Your Monitor Package Contents Your monitor ships with the components shown below. Make sure that you have received all the components and contact Dell if something is missing. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries.
DP cable U2419HC Color Calibration Factory Report Every Dell U2419HC is shipped incorporating pre-tuned standard mode(sRGB) with average Delta-E ≤2. This helps prevent significant color inconsistency or inaccuracy when content is displayed onscreen. In addition, a tighter grey-scale tracking on each U2419H helps enable ultra-smooth color gradation. The factory measurements from this very unit are shown here. Be assured of Accurate, Precise and Consistent Onscreen Color with every Dell UltraSharp U2419H.
Identifying Parts and Controls Front view 1 Label 1 2 2 Description Function buttons (For more information, see Operating the Monitor) Power on/off button (with LED indicator) About Your Monitor | 7
Back View 1 DELL U2419HC Flat Panel Monitor / Monitor Plano Panel / Moniteur à écran plat / 液晶顯示器 Model No. / N° de Modelo / Numéro de modèle /型號: U2419HCt Input Rating / Entrada / Daya Tegangan / Tension d’entrée: 100-240V ~ 50/60Hz 1.6 A 輸入電源:交流電壓 100-240伏特, 1.5 安培, 50/60赫茲 Made in China / Fabricado en China / Fabriqués en Chine / Сделано в Китае / 製造地:中國 Consumo de energía en operación XX.
Bottom View 8 1 2 3456 7 Label Description Use 1 AC power port To connect the monitor power cable. 2 HDMI port Connect your computer with HDMI cable (optional). 3 DP port (in) Connect your computer with DP cable. 4 USB Type-C/DisplayPort Connect to your computer using the USB Type-C cable. The USB 3.1 Type-C port offer the fastest transfer rate and the alternate mode with DP 1.4 support the maximum resolution of 1920 x1080 at 60 Hz(U2419HC) and 2560 x 1440 at 60 Hz(U2719DC), PD 20 V/3.
Monitor Specifications Model U2419HC U2719DC Screen type Active matrix - TFT LCD Active matrix - TFT LCD Panel Type In-plane switching Technology In-plane switching Technology Aspect ratio 16:9 16:9 Viewable image dimensions Diagonal 60.47 cm (23.8 in.) 68.47 cm (27 in.) Horizontal 527.04 mm (20.75 in.) 596.74 mm (23.49 in.) Vertical 296.46 mm (11.67 in.) 335.66 mm (13.21 in.) 156246.3 mm2 (242.15 in.2) 200301.7 mm2 (310.30 in.2) Pixel pitch 0.2745 mm x 0.2745 mm 0.233 mm x 0.
Connectivity • 1 x DP 1.4 (HDCP 1.4) • 1 x HDMI1.4 (HDCP 1.4) • 1 x USB Type-C (Alternate mode with DisplayPort 1.4, USB 3.1 upstream port, Power Delivery PD up to 65 W) • 1 x DP (Out) with MST (HDCP 1.4) • 2 x USB 3.0 downstream port • 2 x USB 3.0 with BC1.2 charging capability at 2A (max) • 1 x Analog 2.0 audio line out (3.5 mm jack) • 1 x DP 1.4 (HDCP 1.4) • 1 x HDMI1.4 (HDCP 1.4) • 1 x USB Type-C (Alternate mode with DisplayPort 1.4, USB 3.
Preset Display Modes U2419HC Display Mode Vertical Frequency (Hz) 70.0 Pixel Clock (MHz) 720 x 400 Horizontal Frequency (kHz) 31.5 28.3 Sync Polarity (Horizontal/ Vertical) -/+ VESA, 640 x 480 31.5 60.0 25.2 -/- VESA, 640 x 480 37.5 75.0 31.5 -/- VESA, 800 x 600 37.9 60.3 40.0 +/+ VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.0 -/- VESA, 1024 x 768 60.0 75.0 78.8 +/+ VESA, 1152 x 864 67.5 75.0 108.0 +/+ VESA, 1280 x 1024 64.0 60.0 108.
DP MST Multi-Stream Transport (MST) Modes U2419HC MST Source Monitor Maximum number of external monitors that can be supported 1920 x 1080/60 Hz 1920 x 1080/60 Hz 3 NOTE: Maximum external monitor resolution supported is 1920 x 1080 60 Hz only. U2719DC MST Source Monitor Maximum number of external monitors that can be supported 2560 x 1440/60 Hz 2560 x 1440/60 Hz 1 NOTE: Maximum external monitor resolution supported is 2560 x 1440 60 Hz only.
Electrical Specifications Model U2419HC/U2719DC Video input signals • Digital video signal for each differential line Per differential line at 100 ohm impedance • DP/USB Type-C signal input support Input voltage/ frequency/current Inrush current 100-240 VAC / 50 or 60 Hz ± 3 Hz / 1.8 A (maximum) 120 V: 30 A (Max.) 240 V: 60 A (Max.
Depth 165.0 mm (6.50 in.) 180.0 mm (7.09 in.) 7.55 kg (16.64 lb) 8.72 kg (19.22 lb) Weight with stand assembly 5.32 kg (11.73 lb) and cables Weight without stand 3.37 kg (7.43 lb) assembly (For wall mount or VESA mount considerations - no cables) Weight of stand assembly 1.59 kg (3.50 lb) 6.24 kg (13.75 lb) Weight Weight with packaging 4.19 kg (9.23 lb) 1.72 kg (3.79 lb) Environmental Characteristics Model U2419HC/U2719DC Compliant Standards • ENERGY STAR certified Monitor.
Power Management Modes If you have VESA’s DPM-compliant video card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as power save mode*. If the computer detects input from the keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature.
The OSD operates only in the normal operation mode. If you press any button in the activeoff mode, the following message is displayed: Dell UltraSharp 24/27 Monitor No DP signal from your device. Press any key on the keyboard or move the mouse or wake it up. If there is no display, press the monitor button again to select the correct input source. U2419HC/U2719DC *Zero power consumption in OFF mode can only be achieved by disconnecting the AC mains cable from the monitor.
Pin Assignments DP port (in) Pin number 20-pin side of the connected signal cable 1 ML3(n) 2 GND 3 ML3(p) 4 ML2(n) 5 GND 6 ML2(p) 7 ML1(n) 8 GND 9 ML1(p) 10 ML0(n) 11 GND 12 ML0(p) 13 CONFIG1 14 CONFIG2 15 AUX CH (p) 16 GND 17 AUX CH (n) 18 Hot Plug Detect 19 Return 20 DP_PWR 18 | About Your Monitor
DP port (out) Pin number 20-pin side of the connected signal cable 1 ML0(p) 2 GND 3 ML0(n) 4 ML1(p) 5 GND 6 ML1(n) 7 ML2(p) 8 GND 9 ML2(n) 10 ML3(p) 11 GND 12 ML3(n) 13 CONFIG1 14 CONFIG2 15 AUX CH(p) 16 GND 17 AUX CH(n) 18 Hot Plug Detect 19 Return 20 DP_PWR About Your Monitor | 19
HDMI port Pin number 19-pin side of the connected signal cable 1 TMDS DATA 2+ 2 TMDS DATA 2 SHIELD 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 TMDS DATA 1 SHIELD 6 TMDS DATA 1- 7 TMDS DATA 0+ 8 TMDS DATA 0 SHIELD 9 TMDS DATA 0- 10 TMDS CLOCK+ 11 TMDS CLOCK SHIELD 12 TMDS CLOCK- 13 CEC 14 Reserved (N.C.
USB Type-C port Pin Signal Pin Signal A1 GND B12 GND A2 SSTXp1 B11 SSRXp1 A3 SSTXn1 B10 SSRXn1 A4 VBUS B9 VBUS A5 CC1 B8 SBU2 A6 Dp1 B7 Dn1 A7 Dn1 B6 Dp1 A8 SBU1 B5 CC2 A9 VBUS B4 VBUS A10 SSRXn2 B3 SSTXn2 A11 SSRXp2 B2 SSTXp2 A12 GND B1 GND About Your Monitor | 21
Universal Serial Bus (USB) This section gives you information about the USB ports available on your monitor. NOTE: Up to 2 A on USB downstream port (port with battery icon) with BC 1.2 compliance devices; up to 0.9 A on the other 2 USB downstream ports. Your computer has the following USB ports: • 4 downstream - 2 at left side, 2 at bottom Power Charging Port - the ports with battery icon supports fast current charging capability if the device is BC 1.2 compatible.
Plug-and-Play You can install the monitor in any Plug-and-Play-compatible system. The monitor automatically provides the computer system with its extended display identification data (EDID) using display data channel (DDC) protocols so the computer can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see Operating the Monitor.
Setting Up the Monitor Attaching the Stand NOTE: The stand riser and stand base are detached when the monitor is shipped from the factory. NOTE: The procedure below is applicable for the default stand. If you purchased any other stand, see the documentation shipped with the stand to set it up. CAUTION: Place monitor of a flat, clean, and soft surface to avoid scratching the display panel. To attach the monitor stand: 1 Align the stand base protruded blocks to the matching slot on the stand.
1 Remove the monitor protective cover and place the monitor with its front facing downward on it. 2 Insert the two tabs on the upper part of the stand to the groove on the back of the monitor. 3 Press the stand down till it snaps into its place.
Using the Tilt, Swivel, and Vertical Extension NOTE: This is applicable for a monitor with a stand. If you purchased any other stand, refer to the respective stand setup guide for set up instructions. Tilt, Swivel and Vertical Extension With the stand attached to the monitor, you can tilt the monitor for the most comfortable viewing angle. 5° 40° 130 mm 40° 21° NOTE: The stand is detached when the monitor is shipped from the factory.
Adjusting the Rotation Display Settings of Your System After you have rotated your monitor, you need to complete the procedure below to adjust the Rotation Display Settings of your System. NOTE: If you are using the monitor with a non-Dell computer, you need to go the graphics driver website or your computer manufacturer website for information on rotating the ’contents’ on your display. To adjust the Rotation Display Settings: 1 2 3 Right-click on the desktop and click Properties.
Connecting Your Monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. To connect your monitor to the computer: 1 Turn off your computer. 2 Connect the DP/USB type-C cable from your monitor to the computer. 3 Switch on your monitor. 4 Select the correct input source at monitor OSD Menu and turn on your computer. NOTE: U2419HC/U2719DC default setting is DP 1.4. A DP 1.1 Graphic card may not display normally.
Connecting the monitor for DP Multi-Stream Transport (MST) function DP DP DP out DP NOTE: Supports the DP MST feature. To make use of this feature, your PC Graphics Card must be certified to DP1.2 with MST option. NOTE: Remove the rubber plug when using DP out connector. Connecting the USB Type-C cable USB Type-C USB Type-C The USB Type-C port on your monitor: • Can be used as USB Type-C or DisplayPort 1.4, alternatively. • Supports USB Power Delivery (PD), with profiles up to 65 W.
Connecting the monitor for USB-C Multi-Stream Transport (MST) function DP in USB Type-C DP out USB Type-C NOTE: The maximum number of supported U2719DC via MST is subjected to the bandwith of the USB-C source. Please refer to “product specific problems –No image when using USB-C MST”. NOTE: Remove the rubber plug when using DP out connector.
Removing the Monitor Stand CAUTION: To prevent scratches on the LCD screen while removing the stand, make sure that the monitor is placed on a soft, clean surface. NOTE: The procedure below is applicable for the default stand. If you purchased any other stand, see the documentation shipped with the stand to set it up. To remove the stand: 1 Place the monitor on a soft cloth or cushion. 2 Press and hold the stand-release button. 3 Lift the stand up and away from the monitor.
Operating the Monitor Turning on the Monitor Press the button to turn on the monitor. Using the Front Panel Controls Use the control buttons at the bottom edge of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characteristics as they change.
The following table describes the front panel buttons: Front‑Panel Button Description 1 Use this button to choose from a list of preset color modes. Shortcut key: Preset Modes 2 Use this button to choose from a list of Input Source. Shortcut key: Input Source 3 Use this menu button to launch the on-screen display (OSD) and select the OSD menu. See Accessing the Menu System. Menu 4 Use this button to go back to the main menu or exit the OSD main menu.
Using the OSD Lock function With the control buttons on the monitor locked, you can prevent people from accessing the controls. It also prevents accidental activation in multiple monitors side-by-side setup. Dell UltraSharp 24/27 Monitor Brightness/Contrast Language Input Source Rotation Color Transparency Display Timer Menu Lock Menu Buttons Personalize Reset Menu Power Button Menu + Power Buttons Others Disable 1.
Options Description 4 Use this icon to run the built-in diagnostics, see Built-in Diagnostics. Built-in Diagnostics 3. Hold for 4 seconds, Select the following table describes the unlock icons: Options Description 1 Use this icon to unlock OSD menu function. Menu Buttons lock 2 Use this icon to unlock power button from powering off. Power button lock 3 Use this icon to unlock OSD menu and power button from powering off.
Front‑Panel Button Use the buttons on the front of the monitor to adjust the image settings. 1 2 3 Front Panel Button Description 1 Use the Up (increase) and Down (decrease) keys to adjust items in the OSD menu. Up Down 2 Use the OK button to confirm your selection. OK 3 Use the Back button to go back to the previous menu.
Using the On-Screen Display (OSD) Menu Accessing the Menu System NOTE: Any changes you make using the OSD menu are automatically saved if you move to another OSD menu, exit the OSD menu, or wait for the OSD menu to disappear. 1 Press the button to launch the OSD menu and display the main menu. Dell UltraSharp 24/27 Monitor Brightness/Contrast Input Source Color 75 % Display Menu 75 % Personalize Others 2 Press the and buttons to move between options.
Icon Menu and Submenus Description Brightness/ Contrast Use this menu to activate Brightness/Contrast adjustment. Dell UltraSharp 24/27 Monitor Brightness/Contrast Input Source Color 75 % Display Menu 75 % Personalize Others Brightness Contrast Input Source Brightness adjusts the luminance of the backlight (minimum 0; maximum 100). Press the button to increase brightness. Press the button to decrease brightness.
Icon Menu and Submenus USB Type-C Description Select USB Type-C input when you are using the USB Type-C connector. Use DP HDMI to select the USB Type-C input source. Select DP input when you are using the DP (DisplayPort) connector. Use to select the DP input source. Select HDMI input when you are using the HDMI connector. Use to select the HDMI input source. Auto Select Use to select Auto Select, the monitor scans for available input sources.
Icon Menu and Submenus Description Preset Modes When you select Preset Modes, you can choose Standard, ComfortView, Multiscreen Match, Movie, Game, Color Temp. or Custom Color from the list. Dell UltraSharp 24/27 Monitor Brightness/Contrast Preset Modes Standard Input Source Input Color Format ComfortView Color Reset Color Multiscreen Match Display Movie Menu Game Personalize Color Temp. Others Custom Color • Standard: Default color settings. This is the default preset mode.
Icon Menu and Submenus Input Color Format Description Allows you to set the video input mode to: • RGB: Select this option if your monitor is connected to a computer (or DVD player) using the USB Type-C, DP cable. YPbPr: Select this option if your DVD player supports only YPbPr output. Dell UltraSharp 24/27 Monitor Brightness/Contrast Preset Modes Input Source Input Color Format RGB Color Reset Color YPbPr Display Menu Personalize Others Hue Use or to adjust the hue from 0 to 100.
Icon Menu and Submenus Description Display Use the Display menu to adjust image. Dell UltraSharp 24/27 Monitor Brightness/Contrast Aspect Ratio Wide 16:9 Input Source Sharpness 50 Color Response Time Normal Display MST Off Menu USB-C Prioritization High Resolution Personalize Reset Display Others Aspect Ratio Sharpness Adjust the image ratio to Wide 16:9, Auto Resize, 4:3, 1:1. Makes the image look sharper or softer. Use or to adjust the sharpness from ‘0’ to ‘100’.
Icon Menu and Submenus Description Menu Select this option to adjust the settings of the OSD, such as the languages of the OSD, the amount of time the menu remains on screen, and so on. Dell UltraSharp 24/27 Monitor Brightness/Contrast Language Input Source Rotation Color Transparency 20 Display Timer 20 s Menu Lock Disable Personalize Reset Menu English Others Language Rotation Set the OSD display to one of eight languages.
Icon Menu and Submenus Lock Description Controls user access to adjustments. the buttons are locked. Dell UltraSharp 24/27 Monitor Brightness/Contrast Language Input Source Rotation Color Transparency Display Timer Menu Lock Menu Buttons Personalize Reset Menu Power Button Others Menu + Power Buttons Disable • Menu Buttons: Through OSD to lock the Menu buttons. • Power Button: Through OSD to lock the Power button.
Icon Menu and Submenus Description Personalize Dell UltraSharp 24/27 Monitor Brightness/Contrast Shortcut Key 1 Preset Modes Input Source Shortcut Key 2 Brightness/Contrast Color Power Button LED On During Active Display USB-A Charging Off During Standby Menu USB-C Charging Off During Power Off Personalize Reset Personalization Others Shortcut key 1 Shortcut key 2 Power Button LED USB-A Charging USB-C Charging Reset Personalization Select from Preset Modes, Brightness/Contrast, Inpu
Icon Menu and Submenus Description Others Dell UltraSharp 24/27 Monitor Display Info DDC/CI Brightness/Contrast Display Info Input Source DDC/CI On Color LCD Conditioning Off Display Firmware M2T101 Menu Service Tag H8CJ2NF Personalize Reset Others Others Factory Reset ENERGY STAR® Select this option to adjust the OSD settings such as the DDC/CI, LCD conditioning, and so on. Displays the monitor’s current settings.
Icon Menu and Submenus LCD Conditioning Description Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run. Select On to start the process. Dell UltraSharp 24/27 Monitor Firmware Brightness/Contrast Display Info Input Source DDC/CI Color LCD Conditioning On Display Firmware Off Menu Service Tag Personalize Reset Others Others Factory Reset Firmware version. Service Tag Displays the Service Tag.
OSD Warning Messages When the monitor does not support a particular resolution mode, you can see the following message: U2419HC Dell UltraSharp 24 Monitor The current input timing is not supported by the monitor display. Please change your input timing to 1920x1080, 60Hz or any other monitor listed timing as per the monitor specifications. U2419HC U2719DC Dell UltraSharp 27 Monitor The current input timing is not supported by the monitor display.
When the monitor enters the Power Save mode, the following message will appear: Dell UltraSharp 24/27 Monitor Entering Power Save Mode. U2419HC/U2719DC Activate the computer and wake up the monitor to gain access to the OSD. If you press any button other than the power button, the following messages will appear depending on the selected input: Dell UltraSharp 24/27 Monitor No DP signal from your device. Press any key on the keyboard or move the mouse or wake it up.
A message is displayed while the cable supporting DP alternate mode is connected to the monitor under the following conditions: • When Auto Select for USB-C is set to Prompt for Multiple Inputs. • When the DP cable is connected to the monitor. Dell UltraSharp 24/27 Monitor Switch to USB-C Video Input: Yes No U2419HC/U2719DC When you select OSD items of High resolution in Display feature, the following message will appear: Dell UltraSharp 27 Monitor If your PC is not DP 1.
When USB-C Prioritization is set to High Data Speed, select OSD items of Factory Reset in Other feature, the following message will appear: Dell UltraSharp 27 Monitor Please disconnect any USB storage device to your monitor during the switching process (up to 12 seconds).
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. Self-Test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1 Turn off both your computer and the monitor. 2 Unplug the video cable from the back of the computer.
Built-in Diagnostics Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card. NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode. 1 2 3 4 5 To run the built-in diagnostics: 1 Make sure that the screen is clean (no dust particles on the surface of the screen).
Always On USB Type-C Charging You can charge your notebook or mobile devices through the USB Type-C cable even when the monitor is powered off. This option, called ‘USB-C Charging‘ is located in the Personalize section of the OSD. This feature is only available in the following monitor firmware revisions: • U2419HC: M3T106 or later • U2719DC: M3T106 or later You may verify your monitor’s firmware revision from Firmware.
4 Check current firmware revision: click Update to update the firmware. 5 Wait for the firmware to be updated. 6 Click Close once the firmware is updated.
Common Problems The following table contains general information about common monitor problems you might encounter and the possible solutions: Common What You Symptoms Experience No Video/Power No picture LED off No Video/Power No picture or no LED on brightness Missing Pixels LCD screen has spots Stuck-on Pixels LCD screen has bright spots Brightness Problems Safety Related Issues Intermittent Problems Picture too dim or too bright Visible signs of smoke or sparks Monitor malfunctions on & off 56
Common Symptoms What You Experience Missing Color Picture missing color Wrong Color Image retention from a static image left on the monitor for a long period of time Possible Solutions • Perform monitor self-test. • Ensure that the video cable connecting the monitor to the computer is connected properly and is secure. • Check for bent or broken pins in the video cable connector. Picture color not • Change the settings of the Preset Modes in the good Color menu OSD depending on the application.
Problem What you experience The picture does The picture not fill the entire cannot fill the screen height or width of the screen No image Black screen when using USB Type-C connection to computer, laptop, and so on No charging No charging when using USB Type-C connection to computer, laptop, and so on Intermittent Intermittent charging charging when using USB Type-C connection to computer, laptop, and so on No image Black screen when using DP connection to the PC No image when using USB Type-C MST 58
Appendix Safety Instructions For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces. WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Safety, Environmental, and Regulatory Information (SERI). FCC Notices (U.S.
Setting Up Your Monitor Setting Display Resolution to 1920 x 1080 (U2419HC)/ 2560 x 1440 (U2719DC) (maximum) For best performance, set the display resolution to 1920 x 1080 U2419HC)/2560 x 1440(U2719DC) pixels by performing the following steps: In Windows Vista, Windows 7, Windows 8 or Windows 8.1: 1 For Windows 8 or Windows 8.1 only, select the Desktop tile to switch to classic desktop. For Windows Vista and Windows 7, skip this step. 2 Right-click on the desktop and click Screen Resolution.
Non-Dell computer In Windows Vista, Windows 7, Windows 8 or Windows 8.1: 1 For Windows 8 or Windows 8.1 only, select the Desktop tile to switch to classic desktop. For Windows Vista and Windows 7, skip this step. 2 Right-click on the desktop and click Personalization. 3 Click Change Display Settings. 4 Click Advanced Settings. 5 Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, AMD, Intel etc.).
Maintenance Guidelines Cleaning Your Monitor WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. CAUTION: Read and follow the Safety Instructions before cleaning the monitor. For best practices, follow these instructions in the list below while unpacking, cleaning, or handling your monitor: • To clean your anti-static screen, lightly dampen a soft, clean cloth with water.
