Users Guide

54  │  Operating the Monitor
OSD Warning Messages
When the monitor does not support a particular resolution mode, you will see the
following message:
NOTE: The message may be slightly different according to the
connected input signal.
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See Monitor Specifications for the Horizontal and Vertical
frequency ranges addressable by this monitor. Recommended mode is 3440 x 1440.
You will see the following message before the DDC/CI function is disabled:
Reset Others Reset all settings under the Others menu to the factory
preset values.
Factory Reset Reset all settings to the factory preset values.