Dell UltraSharp 43 4K USB-C-skjerm Bruksanvisning Modell: U4320Q Forskriftsmessig modell: U4320Qt
MERKNAD: En MERKNAD angir viktig informasjon som hjelper deg med å bruke datamaskinen. FORSIKTIG: FORSIKTIG indikerer at det kan komme skade på maskinvare eller tap av data hvis instruksjonene ikke følges. ADVARSEL: ADVARSEL indikerer at det kan være fare for skade på eiendom, personskade eller død. Copyright © 2019–2020 Dell Inc. eller datterselskaper. Med enerett. Dell, EMC og andre varemerker er varemerker for Dell Inc. eller datterselskaper.
Contents Om skjermen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Innholdet i pakken . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Produktfunksjoner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Identifisere deler og kontroller . . . . . . . . . . . . . . . . . . . . . . . . 8 Skjermens spesifikasjoner . . . . . . . . . . . . . . . . . . .
Feilsøking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Selvtest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Innebygd diagnostikk . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Stille inn USB-C-prioritering når USB-C-lading er satt til På i avslått modus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Om skjermen Innholdet i pakken Skjermen leveres med komponentene vist nedenfor. Sørg for at du har mottatt alle delene, og kontakt Dell hvis noe mangler.
HDMI-kabel DP-kabel VESA-monteringssett • Hurtigoppsettsveiledning • Informasjon om sikkerhet, miljø og forskrifter 6 | Om skjermen
Produktfunksjoner Skjermen Dell UltraSharp U4320Q har en aktiv matrise, tynnfilmstransistor (TFT), flytende krystallskjerm (LCD) og LED-bakgrunnsbelysning. Skjermens funksjoner inkluderer: • 107,975 cm (42,51 tommer) aktivt områdevisning (målt diagonalt) 3840 x 2160 (16:9) oppløsning, pluss fullskjermstøtte for lavere oppløsninger. • Brede synsvinkler med 96 % sRGB-farge. • Justeringsfunksjoner for helling, svinging og vertikal forlengelse. • Innebygde høyttalere (2 x 8 W) fra New Sunlink.
Identifisere deler og kontroller Sett forfra 1 Etikett 1 2 2 Beskrivelse Funksjonsknapper (For mer informasjon kan du se Bruke skjermen.) Strøm på/av-knapp (med LED-indikator) Sett bakfra 1 2 3 5 4 Etikett Beskrivelse Bruk 1 VESA-monteringshull (100 x 100 mm og 200 x 200 mm bak festet VESA-deksel) Veggmontert skjerm med VESAkompatibelt veggmonteringssett (100 x 100 mm og 200 x 200 mm). 2 Etikett med forskriftsinformasjon Viser godkjenninger fra myndighetene.
Etikett Beskrivelse Bruk 4 Strekkode, serienummer og servicekodeetikett Se denne etiketten hvis du må kontakte Dell for teknisk støtte. 5 Kabelorganiseringsspor Bruk til å organisere kabler ved å legge dem gjennom sporet. Sett fra siden 1 2 Etikett Beskrivelse Bruk 1 USB-nedstrømsport Port med 2 USB Type-Cnedstrømsport Porten med batteriikon støtter BC 1.2. -ikonet støtter 5 V/3 A.
Sett nedenfra 10 11 1 2 3 4 5678 9 11 Etikett Beskrivelse Bruk 1 Vekselstrømport Kobles til strømkabelen til skjermen. 2 Kabellåsespor Sikrer skjermen med sikkerhetskabellås (selges for seg). 3 HDMI 1-port Koble til datamaskinen med HDMI-kabel. 4 HDMI 2-port Koble til datamaskinen med HDMI-kabel. 5 DP 1-port Koble til datamaskinen med DP-kabel. 6 DP 2-port Koble til datamaskinen med DP-kabel. 7 USB Type-C/ DisplayPort Koble til datamaskinen ved hjelp av USB Type-Ckabelen. USB 3.
Skjermens spesifikasjoner Skjermtype Aktiv matrise - TFT-LCD Paneltype I-plan-bytteteknologi Sideforhold 16:9 Synlig bildemål Diagonal 1079,75 mm (42,51 tommer) Aktivt område Horisontal 941,18 mm (37,05 tommer) Vertikal 529,42 mm (20,84 tommer) Område 498279,5 mm2 (772,12 tommer2) Pikselavstand 0,2451 mm x 0,2451 mm Piksler per tomme (PPT) 103,23 Betraktningsvinkel Horisontal Vertikal Lysstyrke 178° (typisk) 178° (typisk) 350 cd/m² (typisk) Kontrastforhold 1000 til 1 (typisk) Skjermbel
Kantbredde (kanten av skjermen til aktivt område) 13,0 mm (topp) 13,0 mm (venstre/høyre) 22,0 mm (bunn) Kan justeres Høydejusteringsstativ 60 mm Vipping -5° til 10° Svinging -20° til 20° Kabelorganisering Ja Dell Display Manager (DDM) kompatibilitet Enkel ordning og andre viktige funksjoner Sikkerhet Kabellåsespor (kabellås selges separat) Tyverisikringsstativspor (til panel) * Bare på panelets originaloppløsning, under forhåndsinnstilt tilpasset modus.
Forhåndsinnstilte visningsmoduser Visningsmodus Horisontal frekvens (kHz) Vertikal frekvens (Hz) Pikselklokke (MHz) 720 x 400 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1152 x 864 VESA, 1280 x 800 VESA, 1280 x 1024 VESA, 1280 x 1024 VESA, 1600 x 1200 VESA, 1680 x 1050 VESA, 1920 x 1080 VESA, 1920 x 1200 VESA, 2048 x 1080 VESA, 2048 x 1152 VESA, 2048 x 1280 CVR, 2560 x 1440 VESA, 3840 x 2160 VESA, 3840 x 2160 VESA, 3840 x 2160 VESA, 3840 x 2160
Elektriske spesifikasjoner Videoinngangssignaler Inngangsspenning/frekvens/-strømstyrke Startstrøm Strømforbruk • Digitalt videosignal for hver differensiell linje Per differensiell linje ved 100 ohm impedans • Støtte for signalinngang HDMI/DP/USB Type-C 100 til 240 V vekselstrøm / 50 Hz eller 60 ± 3 Hz / 3,3 A (typisk) 120 V: 30 A (maks.) 240 V: 60 A (maks.) 0,2 W (avslått)1 0,3 W (ventemodus)1 64,3 W (påslått)1 260 W (maks.)2 50,44 W (Pon)3 157,89 kWh (TEC)3 Som definert i EU 2019/2021 og EU 2019/2013.
Høyttalerspesifikasjoner Merkeeffekt for høyttaler 2x8W Frekvensrespons 100 Hz–20 kHz Impedans 6 ohm Fysiske egenskaper Tilkoblingstype • HDMI-kontakt • DP-kontakt • USB Type-C-kontakt • Lydlinje ut • USB 3.1 nedstrømsportkontakt x 3 (Port med batteriikon støtter BC 1.2.
Vekt Vekt med emballasje 25,6 kg (56,44 lb) Vekt med stativmontering og kabler Vekt uten stativmontering (for veggmontering eller VESA-montering – ingen kabler) Vekt til stativmontering 17,6 kg (38,80 lb) 13,2 kg (29,10 lb) 4,0 kg (8,82 lb) Miljøegenskaper Samsvarende standarder • ENERGY STAR-sertifisert skjerm. • EPEAT-registrert der det er aktuelt. EPEAT-registrering varierer fra land til land. Se www.epeat.net for registreringsstatus etter land.
Pinnetilordninger HDMI-port Pinnenummer 19-pinnerssiden av den tilkoblede signalkabelen 1 TMDS DATA 2+ 2 TMDS DATA 2 SKJERMING 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 TMDS DATA 1 SKJERMING 6 TMDS DATA 1- 7 TMDS DATA 0+ 8 TMDS DATA 0 SKJERMING 9 TMDS DATA 0- 10 TMDS KLOKKE+ 11 TMDS KLOKKESKJERMING 12 TMDS KLOKKE- 13 CEC 14 Reservert (N.C.
DP-port Pinnenummer 20-pinnerssiden av den tilkoblede signalkabelen 1 ML3(n) 2 JORD 3 ML3(p) 4 ML2(n) 5 JORD 6 ML2(p) 7 ML1(n) 8 JORD 9 ML1(p) 10 ML0(n) 11 JORD 12 ML0(p) 13 CONFIG1 14 CONFIG2 15 AUX-KN (p) 16 JORD 17 AUX-KN (n) 18 Hot Plug-deteksjon 19 Tilbake 20 DP_PWR 18 | Om skjermen
USB Type-C-port USB Type-Ckontakt kobles vanligvis til en lader med en Type-C-kabel Pinne Signal Pinne Signal A1 JORD B12 JORD A2 SSTXp1 B11 SSRXp1 A3 SSTXn1 B10 SSRXn1 A4 VBUS B9 VBUS A5 CC1 B8 SBU2 A6 Dp1 B7 Dn1 A7 Dn1 B6 Dp1 A8 SBU1 B5 CC2 A9 VBUS B4 VBUS A10 SSRXn2 B3 SSTXn2 A11 SSRXp2 B2 SSTXp2 A12 JORD B1 JORD Om skjermen | 19
Universal Serial Bus (USB) Denne delen gir deg informasjon om USB-portene som skjermen har. MERKNAD: Opptil 2 A på USB-nedstrømsport (port med batteriikon) med enheter som støtter BC 1.2; opptil 3 A på USB Type-C-nedstrømsport (port med -ikonet) med enheter som støtter 5 V/3 A. Datamaskinen har følgende USB-porter: • 4 nedstrøms - 2 på venstre side, 2 på bunnen Port for strømlading - portene med batteriikonet støtter hurtiglading hvis enheten støtter BC 1.2.
Plug-and-Play Du kan installere skjermen i et hvilket som helst Plug-and-Play-kompatibelt system. Skjermen gir datamaskinen automatisk EDID (Extended Display Identification Data) ved hjelp av DDC-protokoller (Display Data Channel) slik at datamaskinen kan konfigurere seg selv og optimalisere skjerminnstillingene. Som oftest installeres skjermen automatisk; du kan velge forskjellige innstillinger hvis ønskelig. Du finner mer informasjon om hvordan skjerminnstillingene endres under Bruke skjermen.
Sette opp skjermen Feste stativet MERKNAD: Stativstigerøret og stativbasen er festet til skjermhodet når skjermen leveres fra fabrikken. MERKNAD: Fremgangsmåten nedenfor gjelder for standardstativet. Hvis du har kjøpt et annet stativ, kan du se i dokumentasjonen som fulgte med stativet for å sette det opp. FORSIKTIG: Plasser skjermen på en flat, ren og myk overflate for å unngå riper på skjermpanelet.
Feste skjermstativet: 1 Plasser skjermen med forsiden vendt nedover på den og løft dekselet for å eksponere VESA-området for stativmontering. 2 Sett de to tappene på den øvre delen av stativet inn i sporet på baksiden av skjermen. 3 Trykk Trykk stativet ned til det smekker på plass.
Bruke vipping, svinging og vertikal forlengelse MERKNAD: Dette gjelder for en skjerm med stativ. Hvis du har kjøpt et annet stativ, må du se i den tilhørende monteringsveiledningen for monteringsinstruksjoner. Vipping, svinging og vertikal forlengelse Når stativet er festet til skjermen, kan du vippe den til vinkelen som er mest behagelig å se på. 5° 20° 20° 60 mm 10° MERKNAD: Stativet er festet til skjermhodet når skjermen leveres fra fabrikken.
Koble til skjermen ADVARSEL: Før du begynner på noen av prosedyrene i denne delen, må du følge Sikkerhetsinstruksjonene. Koble skjermen til datamaskinen: 1 Slå av datamaskinen. 2 Koble HDMI/DP/USB Type-C-kabelen fra skjermen til datamaskinen. 3 Slå på skjermen. 4 Velg riktig inngangskilde fra skjermmenyen, og slå på datamaskinen.
Koble til USB Type-C-kabelen (C til A) USB Type-C USB MERKNAD: Med denne tilkoblingen er bare data tilgjengelig og ikke video. Man må bruke en annen videotilkobling for visning. Koble til USB Type-C-kabelen (C til C) USB Type-C USB Type-C USB Type-C-porten (bunn) på skjermen: • Kan brukes enten som USB-C eller DisplayPort 1.4. • Støtter USB Power Delivery (PD) med profiler opptil 90 W.
Nominell effekt (på bærbare datamaskiner som har USB Type-C med Power Delivery) 45 W 65 W 90 W 130 W Maksimal ladeeffekt 45 W 65 W 90 W Støttes ikke Organisere kabler Når du har koblet alle nødvendige kabler til skjermen og datamaskinen, (se Koble til skjermen for tilkobling av kabler), ordner du alle kablene som vist ovenfor. Fjerne skjermstativet FORSIKTIG: For å forhindre riper på LCD-skjermen når du tar av stativet må du sørge for at skjermen plasseres på en myk, ren overflate.
3 2 Veggmontering (valgfritt) MERKNAD: Bruk M6 x 12 mm (200 x 200 mm) eller M4 x 12 mm (100 x 100 mm) skruer for å koble skjermen til veggmonteringssettet. Se instruksjonene som følger med det VESA-kompatible veggmonteringssettet. 1 Plasser skjermen på en myk duk eller pute på et stabilt, flatt bord. 2 Ta av stativet. 3 Bruk en stjerneskrutrekker for å fjerne de fire skruene som fester plastdekselet. 4 Fest monteringsbraketten fra veggmonteringssettet til skjermen.
Bruke skjermen Slå på skjermen Trykk på -knappen for å slå på skjermen. Bruke kontrollene på frontpanelet Bruk kontrollknappene på bunnen av skjermen for å justere parametre for bildet som vises. Når du bruker disse knappene til å justere innstillingene, viser skjermmenyen tallverdiene for funksjonene når de endres.
Tabellen nedenfor beskriver knappene på frontpanelet: Frontpanelknapp 1 Beskrivelse Bruk denne knappen for å velge fra en liste over forhåndsinnstilte fargemoduser. Hurtigtast: Forhåndsinnstilte moduser Bruk denne knappen for å velge en verdi for lydstyrke. 2 Hurtigtast: Lydstyrke Bruk menyknappen til å starte skjermmenyen (OSD), og velg skjermmenyen. Se Åpne menysystemet. 3 Meny 4 Bruk denne knappen for å gå tilbake til hovedmenyen eller avslutte hovedskjermmenyen.
Bruke skjermmenylåsen Når kontrollknappene på skjermen er låst, kan du forhindre at folk får tilgang til kontrollene. Det forhindrer også utilsiktet aktivering når flere skjermer er satt opp side om side. Dell UltraSharp 43 Monitor Brightness/Contrast Input Source Color Menu Buttons Display Power Button Lock PIP/PBP Menu + Power Buttons Audio Disable Menu Personalize Others 1. Følgende melding vises.
4 Bruk dette ikonet til å kjøre den innebygde diagnosen; se Innebygd diagnostikk. Innebygd diagnostikk 3. Hold inne i 4 sekunder; velg fra følgende tabell, som beskriver låseikonene: Alternativer 1 Beskrivelse Bruk dette ikonet for å låse opp skjermmenyfunksjonen. Lås menyknapp 2 Bruk dette ikonet for låse opp strømknappen for å slå av. Lås strømknapp 3 Bruk dette ikonet for å låse opp skjermmenyen og strømknappen til å slå av.
Frontpanelknapp Bruk knappene på forsiden av skjermen til å justere bildeinnstillingene. 1 Frontpanelknapp 1 Opp 2 3 Beskrivelse Trykk Opp (øk) og Ned (reduser) for å justere elementene på skjermmenyen. Ned Trykk på OK-knappen for å bekrefte valget ditt. 2 OK Trykk Tilbake-knappen for å gå tilbake til forrige meny.
Bruke skjermmenyen (OSD) Åpne menysystemet MERKNAD: Endringer du gjør ved hjelp av skjermmenyen, lagres automatisk hvis du flytter til en annen skjermmeny eller avslutter skjermmenyen, eller når skjermmenyen forsvinner. 1 Trykk -knappen for å åpne skjermmenyen og vise hovedmenyen. Dell UltraSharp 43 Monitor Brightness/Contrast Input Source Color 75 % Display PIP/PBP 75 % Audio Menu Personalize Others 2 Trykk - og -knappene for å flytte mellom alternativene.
Ikon Meny og undermenyer Brightness/ Contrast (Lysstyrke/ kontrast) Beskrivelse Bruk denne menyen for å aktivere justering av Brightness/Contrast (Lysstyrke/kontrast). Dell UltraSharp 43 Monitor Brightness/Contrast Input Source Color 75 % Display PIP/PBP 75 % Audio Menu Personalize Others Brightness (Lysstyrke) Brightness (Lysstyrke) justerer lystettheten på baklyset. (minimum 0; maksimum 100). Trykk Trykk Contrast (Kontrast) Input Source (Inngangskilde) -knappen for å øke lysstyrken.
Ikon Meny og undermenyer USB Type-C Beskrivelse Velg USB Type-C-inngang når du bruker USB Type-Ckontakten. DP1 Bruk for å velge USB Type C-inngangskilden. Velg DP1-inngang når du bruker DP1 (DisplayPort)kontakten. DP2 Bruk for å velge DP1-inngangskilden. Velg DP2-inngang når du bruker DP2 (DisplayPort)kontakten. HDMI 1 Bruk for å velge DP2-inngangskilden. Velg HDMI 1-inngang når du bruker HDMI-1 kontakten. HDMI 2 Bruk for å velge HDMI 1-inngangskilden.
Ikon Meny og undermenyer Color (Farge) Beskrivelse Bruk Color (Farge)-menyen for å justere fargeinnstillingsmodus. Dell UltraSharp 43 Monitor Brightness/Contrast Input Source Color Preset Modes Standard Display Input Color Format RGB PIP/PBP Reset Color Audio Menu Personalize Others Preset Modes Når du velger Preset Modes (Forhåndsinnstilt (Forhåndsinn- moduser), kan du velge Standard, ComfortView, stilte moduser) Color Temp. (Fargetemperatur) eller Custom Color (Egendefinert farge) fra listen.
Ikon Meny og undermenyer Beskrivelse • Blink ofte for å fukte øynene dine når du arbeider med skjermen. • Ta regelmessige og hyppige pauser på 20 minutter annenhver time. • Se bort fra skjermen og se på en fjern gjenstand 6 meter vekke i minst 20 sekunder i pausene. • Gjør strekkøvelser for å avlaste spenninger i nakke/ arm/rygg/skuldre i pausene. • Color Temp.
Ikon Meny og Beskrivelse undermenyer Display (Skjerm) Bruk Display (Skjerm)-menyen for å justere bildet. Dell UltraSharp 43 Monitor Brightness/Contrast Input Source Aspect Ratio Wide 16:9 Color Underscan Off Display Sharpness 50 PIP/PBP Response Time Normal Audio USB-C Prioritization High Resolution Menu Reset Display Personalize Others Aspect Radio (Sideforhold) Underscan (Underskanning) Sharpness (Skarphet) Sett sideforholdet til Wide 16:9 (Bred 16:9), 4:3 eller 5:4.
Ikon Meny og undermenyer PIP/PBP Beskrivelse Du kan vise flere bilder samtidig. Dell UltraSharp 43 Monitor Brightness/Contrast Input Source Color Display PIP/PBP PIP/PBP Mode Off Audio Menu Personalize Others PIP/PBP Mode Justerer PIP- eller PBP (bilde ved bilde)-modus. (PIP-/PBPDu kan deaktivere denne funksjonen ved å velge Off modus) (Av). PIP/PBP Gjelder bare når brukeren velger PIP/PBP. Source (PIP-/ PBP-kilde) Velg Vindu 1-kilde. Window1 Source (Vindu 1-kilde) Window2 Velg Vindu 2-kilde.
Ikon Meny og undermenyer Audio (Lyd) Beskrivelse Bruk Lydinnstillingsmenyen til å justere lydinnstillingene. Dell UltraSharp 43 Monitor Brightness/Contrast Input Source Color Volume Display Audio Source PIP/PBP Speaker Audio Reset Audio 50 On Menu Personalize Others Volume (Lydstyrke) Audio Source (Lydkilde) Speaker (Høyttaler) Reset Audio (Tilbakestill lyd) Menu (Meny) Lar deg øke høyttalerlydstyrken. eller for å justere høyttalerlydstyrken fra Bruk «0» til «100».
Ikon Meny og undermenyer Language (Språk) Transparency (Gjennomsiktighet) Timer (Tidtaker) Lock (Lås) Beskrivelse Still visningen på skjermmenyen til ett av åtte språk. (engelsk, spansk, fransk, tysk, brasiliansk portugisisk, russisk, forenklet kinesisk eller japansk). Velg dette alternativet for å endre gjennomsiktigheten og (min. 0 / maks. 100). på menyen med OSD Hold Time (Skjermmenyholdetid): Angir hvor lenge skjermmenyen vil være aktiv etter at en knapp trykkes.
Ikon Meny og undermenyer Personalize (Tilpass) Beskrivelse Dell UltraSharp 43 Monitor Brightness/Contrast Input Source Shortcut Key 1 Preset Modes Color Shortcut Key 2 Volume Display Power Button LED PIP/PBP USB-C Charging Audio Other USB Charging Off in Standby Mode Menu Monitor Sleep On Personalize Reset Personalization On in On Mode 90W Off During Power Off Others Shortcut key 1 (Hurtigtast 1) Shortcut key 2 (Hurtigtast 2) Power Button LED (StrømknappLED) USB-C Charging (USB-C-l
Ikon Meny og undermenyer Others (Annet) Beskrivelse Dell UltraSharp 43 Monitor Brightness/Contrast Display Info Input Source DDC/CI On HDMI CEC Off LCD Conditioning Off Firmware M2T103 Service Tag H8CJ2NF Color Display PIP/PBP Audio Menu Reset Others Personalize Factory Reset ENERGY STAR® Others Display Info (Vis info) DDC/CI Velg dette alternativet for å justere skjermmenyinnstillingene som DDC/CI, LCD conditioning (LCD-kondisjonering) og så videre. Viser skjermens gjeldende innstillinger.
Ikon Meny og undermenyer LCD Conditioning (LCDkondisjonering) Beskrivelse Hjelper til med å redusere mindre tilfeller av at bildet henger igjen. Avhengig av hvor tungt bildet henger igjen, kan det ta litt tid å kjøre programmet. Velg On (På) for å starte prosessen.
Advarsler på skjermmeny Når skjermen ikke støtter en bestemt oppløsningsmodus, vises følgende melding: Dell UltraSharp 43 Monitor The current input timing is not supported by the monitor display. Please change your input timing to 3840x2160, 60Hz or any other monitor listed timing as per the monitor specifications. U4320Q Dette betyr at skjermen ikke kan synkronisere med signalet den mottar fra datamaskinen.
Dell UltraSharp 43 Monitor No USB Type-C signal from your device. Press any key on the keyboard or move the mouse or wake it up. If there is no display, press the monitor button again to select the correct input source. U4320Q Hvis enten HDMI, DP eller USB Type-C er valgt som inngang, og den tilsvarende kabelen ikke er koblet til, vises en flytende dialogboks som den nedenfor. Dell UltraSharp 43 Monitor No HDMI Cable The display will go into Standby Mode in 4 minutes. www.dell.
Det vises en melding når en kabel som støtter DP-alternativmodus er koblet til skjermen under følgende forhold: • Når Automatisk valg for USB-Cer satt til Prompt for Multiple Inputs. • Når en DP-kabel er koblet til skjermen.
90 W. er satt til On During Power Off Hvis USB-C Charging (USB-C-lading) (På i avslått modus), og du velger skjermmenyelement for USB-C Prioritization (USB-C-prioritering) til High Resolution (Høy oppløsning) eller High Data Speed (Høy datahastighet) i Skjerm-funksjonen, vises følgende melding: Dell UltraSharp 43 Monitor Dynamic switching of USB-C Prioritization is disabled when Always On USB-C Charging is enabled. To change USB-C Prioritization: 1. Shutdown the PC 2. Activate Input Source menu 3.
Når USB-C Charging (USB-C-lading) 90 W er satt til On During Power Off (På i avslått modus) og USB-C-prioritering er satt til High Data Speed (Høy datahastighet), og det velges skjermmenyelementer for Fabrikktilbakestilling fabrikk i Annet-funksjonen, vil følgende melding vises: Dell UltraSharp 43 Monitor Are you sure you want to reset to default settings? Yes No U4320Q Når du velger «Ja» for å tilbakestille til standardinnstillingene, vises følgende melding: Dell UltraSharp 43 Monitor Easy Initial Set
Når du velger skjermelementer for On in Standby Mode (På i ventemodus) i Tilpass-funksjonen, vises følgende melding: Dell UltraSharp 43 Monitor Changing to this setting (without symbol) will Increase power consumption,Do you want to continue? Yes No U4320Q Hvis du justerer lysstyrkenivået over standardnivået 75 %, vises følgende melding: Dell UltraSharp 43 Monitor Adjusting to this value will increase power consumption above the default level.
Feilsøking ADVARSEL: Før du begynner på noen av prosedyrene i denne delen, må du følge Sikkerhetsinstruksjonene Selvtest Skjermen har en selvtestfunksjon, som lar deg sjekke at skjermen fungerer som den skal. Hvis skjermen og datamaskinen er riktig tilkoblet, men skjermen forblir mørk, kan du kjøre selvtest av skjermen med følgende trinn: 1 Slå av både datamaskinen og skjermen. 2 Koble fra videokabelen på baksiden av datamaskinen.
Dell UltraSharp 43 Monitor No USB Type-C Cable The display will go into Standby Mode in 4 minutes. www.dell.com/support/U4320Q U4320Q 4 Denne boksen vises også under normal systemdrift hvis videokabelen blir koblet fra eller skadet. 5 Slå av skjermen og koble til videokabelen på nytt. Slå deretter på både datamaskinen og skjermen. Hvis skjermen forblir tom etter at du har brukt den forrige prosedyren, må du sjekke videokontrolleren og datamaskinen, fordi skjermen fungerer som den skal.
5 6 7 Trykk Knapp 1 på frontpanelet igjen. Fargen på skjermen endres til rød. Se etter eventuelle avvik på skjermen. Gjenta trinn 5 og 6 for å inspisere skjermen med grønn, blå, svart, hvit og tekst. Testen er fullført når det vises en skjerm med tekst. Trykk Knapp 1 igjen for å avslutte. Hvis du ikke oppdager avvik på skjermen ved bruk av det innebygde diagnostiske verktøyet, fungerer skjermen som den skal. Kontroller skjermkortet og datamaskinen.
Dell UltraSharp 43 Monitor Select USB-C Prioritization: High Resolution High Data Speed U4320Q 6 7 Bruk -eller -knappen for å velge foretrukket overføringsprioritet. Innstillingen tar kraft etter at du har slått på PC-en.
PIP-/PBP-modus Hvis skjermen ikke viser fullskjerm, eller oppløsningen ikke er den opprinnelige oppløsningen til PIP/PBP-modus, kan det skyldes atferden til grafikkortet. Følg trinnene nedenfor. 1 Høyreklikk på skrivebordet, og velg Display Settings (Skjerminnstillinger). 2 Velg Advanced display settings (Avanserte skjerminnstillinger). 3 Velg anbefalt oppløsning for grafikkortet, og klikk deretter Apply (Bruk).
Vanlige problemer Tabellen nedenfor inneholder generell informasjon om vanlige problemer som kan oppstå med skjermen og mulige løsninger.
Vanlige symptomer Problemer med lysstyrke Det du opplever Bildet er for svakt eller for lyst Problemer med Synlige tegn sikkerhet på røyk eller gnister Problemer som Skjermen slår kommer og går seg selv på og av Mangler farge Farge mangler på bildet Feil farge Bildefargen er ikke bra Det henger igjen et statisk bilde som har vært på skjermen i lang tid Det vises en svak skygge fra det statiske bildet som ble vist, på skjermen 58 | Feilsøking Mulige løsninger • Tilbakestill skjermen til fabrik
Produktspesifikke problemer Problem Det du opplever Bildet på Bildet er midt skjermen er for på skjermen, lite. men det fyller ikke hele visningsområdet Kan ikke justere Skjermmenyen skjermen med vises ikke på knappene på skjermen frontpanelet Det vises ikke Intet bilde, LEDnoe inngangs- lampen er hvit signal når brukerkontrollene trykkes Mulige løsninger • Sjekk innstillingen for Aspect Ratio (Sideforhold) i Display (Skjerm)innstillinger på skjermmenyen. • Tilbakestill skjermen til fabrikkinnstillingene.
Problem Det lades av og på ved bruk av USB TypeC-tilkobling til datamaskin og så videre Intet bilde ved bruk av DPtilkobling til PC-en Det du Mulige løsninger opplever Lading av og på • Sjekk om det maksimale strømforbruket til enheten er over 65 W. • Sørg for at du bare bruker en Dell-godkjent adapter eller adapteren som følger med produktet. • Sørg for at USB Type-C-kabelen ikke er skadet. Svart skjerm 60 | Feilsøking • Kontroller hvilken DP-standard (DP 1.1a eller DP 1.
Vedlegg Sikkerhetsinstruksjoner Har skjermen glanset ramme, bør man tenke over hvor man plasserer den, da rammen kan skape forstyrrende refleksjoner fra omgivelseslys og lyse overflater. ADVARSEL: Hvis det brukes andre kontroller, justeringer eller prosedyrer enn de som står spesifisert i denne dokumentasjonen, kan det føre til eksponering for støt, elektriske farer og/eller mekaniske farer. Du finner informasjon om sikkerhetsinstruksjoner i Informasjon om sikkerhet, miljø og forskrifter.
EUs produktdatabase for energimerking og produktinformasjonsark U4320Q: https://eprel.ec.europa.eu/qr/344908 Sette opp skjermen Stille skjermoppløsningen til 3840 x 2160 (maksimum) For best ytelse setter du skjermoppløsningen til 3840 x 2160 piksler med følgende trinn: I Windows Vista, Windows 7, Windows 8 eller Windows 8.1: 1 På Windows 8 eller Windows 8.1 må du velge skrivebordflisen for å bytte til klassisk skrivebord. På Windows Vista og Windows 7 kan du hoppe over dette trinnet.
Datamaskin som ikke er fra Dell I Windows Vista, Windows 7, Windows 8 eller Windows 8.1: 1 På Windows 8 eller Windows 8.1 må du velge skrivebordflisen for å bytte til klassisk skrivebord. På Windows Vista og Windows 7 kan du hoppe over dette trinnet. 2 Høyreklikk på skrivebordet, og klikk Personalization (Tilpassing). 3 Klikk Change Display Settings (Endre skjerminnstillinger). 4 Klikk Advanced Settings (Avanserte skjerminnstillinger).
Retningslinjer for vedlikehold Rengjøre skjermen ADVARSEL: Koble stømledningen til skjermen fra stikkontakten før du rengjør den. FORSIKTIG: Les og følg Sikkerhetsinstruksjonene før du rengjør skjermen. For å følge beste praksis må du følge instruksjonene i listen nedenfor når du pakker ut, rengjør eller håndterer skjermen: • Når du rengjør den antistatiske skjermen, fukter du en myk, ren klut med vann.