Monitor Dell UltraSharp U4919DW Ghid de utilizare Model: U4919DW Model reglementat: U4919DWb
Note, atenţionări şi avertizări NOTĂ: O NOTĂ indică informaţii importante care contribuie la utilizarea optimă a computerului. ATENŢIE: O ATENŢIONARE indică posibilitatea de avarii hardware sau de pierdere a datelor în cazul nerespectării instrucţiunilor. AVERTISMENT: O AVERTIZARE indică posibilitatea de pagube materiale, vătămări corporale sau moarte. Drepturi de autor © 2018-2020 Dell Inc. Toate drepturile sunt rezervate. Acest produs este protejat de legislaţia S.U.A.
Cuprins Despre monitorul dvs. . . . . . . . . . . . . . . . . . . . . . . . . 6 Conţinutul pachetului . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Caracteristicile produsului . . . . . . . . . . . . . . . . . . . . . . . . . 9 Identificarea pieselor şi comenzilor . . . . . . . . . . . . . . . . . 10 Vedere din faţă . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Vedere din spate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Instalarea monitorului . . . . . . . . . . . . . . . . . . . . . . 26 Ataşarea suportului . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Suport de montare pe perete/Braţ terţ (opţional) . . . . . 31 Conectarea monitorului . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Conectarea cablului HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Conectarea cablului DisplayPort (DP la DP) . . . . . . . . . . . . . . . . . 35 Conectarea cablului USB tip C. . . . . . . . . . .
Probleme specifice produsului . . . . . . . . . . . . . . . . . . . . . 80 Probleme specifice pentru Universal Serial Bus (USB) . . 82 Anexă . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Notificări FCC (numai în S.U.A.) şi alte informaţii privind reglementările . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Luaţi legătura cu Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Despre monitorul dvs. Conţinutul pachetului Monitorul este furnizat cu componentele de mai jos. Asiguraţi-vă că aţi primit toate componentele şi Luaţi legătura cu Dell verificaţi dacă lipseşte ceva. NOTĂ: Unele elemente pot fi opţionale, nefiind aşadar expediate cu monitorul. Este posibil ca unele caracteristici sau suporturi media să nu fie disponibile în unele ţări. NOTĂ: Pentru instalarea cu orice alt suport, consultaţi instrucţiunile din ghidul de instalare al suportului respectiv.
Bază suport Capac VESA 4 x şuruburi pentru montajul VESA Cablu de alimentare (variază în funcţie de ţară) Cablu HDMI Cablu DP (DP la DP) Cablu USB 3.0 upstream (activează porturile USB ale monitorului) Despre monitorul dvs.
Cablu USB tip C • Ghid de instalare rapidă • Raport de calibrare din fabrică • Informaţii despre securitate, mediu şi omologare 8 │ Despre monitorul dvs.
Caracteristicile produsului Afişajul cu panou plat Dell U4919DW are un ecran cu cristale lichide (LCD) cu tranzistori cu peliculă subţire (TFT) şi matrice activă, cu iluminare de fundal LED. Caracteristicile monitorului includ: • Afişaj cu suprafaţă vizibilă (diagonală) de 124,46 cm (49 inci). Rezoluţie 5120 x 1440 (32:9), în plus acceptă afişarea rezoluţiilor inferioare pe ecranul complet. • Unghiul larg de vizionare permite vizionarea din picioare sau aşezat.
Identificarea pieselor şi comenzilor Vedere din faţă Comenzi de pe panoul frontal Etichetă Descriere 1 Buton Pornit/Oprit (cu indicator LED) 2 Butoane cu funcţii (pentru informaţii suplimentare, vezi Utilizarea monitorului) 10 │ Despre monitorul dvs.
Vedere din spate Vedere din spate cu şi fără suportul monitorului Etichetă 1, 2 3 Descriere Utilizare Sunt prevăzute orificii de montare VESA de 100 mm x 100 mm (1) şi 200 mm x 100 mm (2). Montaţi suportul la monitor folosind orificiile de 200 mm x 100 mm cu şuruburi M4 x 10 mm. Etichetă cu omologări Conţine omologările primite. Pentru suporturi de perete furnizate de terţi se recomandă folosirea seturilor de montare compatibile VESA, cu orificiile de 200 mm x 100 mm şi şuruburi M4 x 10 mm.
4 Etichetă cu numărul de serie şi codul de bare Consultaţi această etichetă dacă este necesar să luaţi legătura cu Dell pentru asistenţă tehnică. 5 Orificiu pentru organizarea cablurilor Permite organizarea cablurilor prin trecerea acestora prin orificiu. Vedere de jos Vedere de jos fără suportul monitorului Etichetă Descriere Utilizare 1 Conector alimentare c.a. Conectaţi cablul de alimentare.
5 Port USB tip C Conectaţi cablul USB tip C, furnizat împreună cu monitorul, la computer sau dispozitivul mobil. Acest port este compatibil cu tehnologia USB Power Delivery, date şi semnal video DisplayPort. Portul USB tip C oferă cele mai mari viteze de transfer, iar modul alternativ cu DP1.4 acceptă o rezoluţie maximă de 5120 x 1440 la 60 Hz, PD 20 V/4,5 A, 20 V/3,25 A, 15 V/3 A, 9 V/3 A şi 5 V/3 A. NOTĂ: USB tip C nu este acceptat în versiunile de Windows anterioare Windows 10.
Specificaţiile monitorului Specificaţiile panoului plat Model U4919DW Tip ecran Matrice activă - LCD TFT Tehnologie panou Tip comutare în plan Raport de aspect 32:9 Imagine vizibilă Diagonală 1244,6 mm (49 inci) Orizontală, suprafaţă activă 1198,08 mm (47,17 inci) Verticală, suprafaţă activă 336,96 mm (13,27 inci) Suprafaţă 403705 mm2 (625,74 inci2) Distanţă între pixeli 0,234 mm x 0,234 mm Pixeli pe inci 109 Unghi de vizionare 178° (vertical) tipic 178° (orizontal) tipic Luminanţă pro
Conectivitate • 2 x HDMI 2.0 (HDCP 2.2) (culori pe 10 biţi @ 60 Hz) • 1 x DP 1.4 (HDCP 2.2) (culori pe 10 biţi @ 60 Hz) • 5 x porturi USB 3.0 downstream • 2 x port USB 3.0 upstream • 1 x USB tip C (mod alternativ cu DP1.4, Power Delivery şi USB 2.
Moduri video acceptate Model U4919DW Capacităţi de afişare video (redare HDMI) 480p, 576p, 720p, 1080i, 1080p (Modul întreţesere nu este acceptat în modul PBP) Moduri de afişare presetate Mod afişare Frecvenţă orizontală (kHz) Frecvenţă verticală (Hz) Tact pixel (MHz) Polaritate sincronizare (orizontală/ verticală) VESA, 720 x 400 31,5 70,0 28,3 -/+ VESA, 640 x 480 31,5 60,0 25,2 -/- VESA, 640 x 480 37,5 75,0 31,5 -/- VESA, 800 x 600 37,9 60,0 40,0 +/+ VESA, 800 x 600 46,9 75,
Specificaţii electronice Model U4919DW Semnale de intrare video HDMI 2.0*/DP 1.4, 600 mV pentru fiecare linie diferenţală, impedanţă intrare 100 ohmi pe pereche diferenţială. Tensiune/frecvenţă/curent Între 100 V c.a. şi 240 V c.a./ 50 Hz sau 60 Hz + intrare c.a. 3 Hz / 3 A (tipic) Curent de pornire • 120 V: 40 A (max.) la 25°C • 240 V: 80 A (max.) la 25°C Consum de energie • 0,2 W (modul Oprit)1 • 0,4 W (modul Inactiv)1 • 47 W (modul Pornit)1 • 230 W (max.
NOTĂ: Acest monitor este certificat ENERGY STAR. Acest produs se califică pentru standardul ENERGY STAR atâta timp cât se păstrează setările implicite din fabrică, la care se poate reveni cu ajutorul funcţiei “Factory Reset” (Resetare fabricaţie) din meniul OSD. Modificarea setărilor implicite din fabrică sau activarea altor caracteristici pot creşte consumul de energie, putându-se astfel depăşi limita indicată de standardul ENERGY STAR.
Caracteristici fizice (continuare) Dimensiuni suport Înălţime (extins) 433,5 mm (17,07 inci) Înălţime (comprimat) 343,5 mm (13,52 inci) Lăţime 380,3 mm (14,97 inci) Adâncime 252,6 mm (9,94 inci) Greutate Greutate cu ambalaj 26,43 kg (58,27 lb) Greutate cu ansamblul suportului şi cabluri 17,20 kg (37,92 lb) Greutate fără ansamblu suport (în vederea montării pe perete sau pe suport VESA - fără cabluri) 11,40 kg (25,13 lb) Greutate ansamblu suport 5,34 kg (11,77 lb) Luciu ramă faţă Cadru negru
Altitudine În funcţiune 3048 m (10000 ft) (maxim) Oprit 12192 m (40000 ft) (maxim) Disipare termică • 784,3 BTU/oră (maximă) • 204,6 BTU/oră (tipică) Alocările pinilor Conector DisplayPort Număr pini Latura cu 20 pini a cablului de semnal conectat 1 ML3 (n) 2 Împământare 3 ML3 (p) 4 ML2 (n) 5 Împământare 6 ML2 (p) 7 ML1 (n) 8 Împământare 9 ML1 (p) 10 ML0 (n) 11 Împământare 12 ML0 (p) 13 Împământare 14 Împământare 15 AUX (p) 16 Împământare 17 AUX (n) 20 │ Despre mon
18 Detectare conectare în funcţiune 19 Re-PWR 20 +3,3 V DP_PWR Conector HDMI Număr pini Latura cu 19 pini a cablului de semnal conectat 1 DATE TMDS 2+ 2 ECRANARE DATE TMDS 2 3 DATE TMDS 2- 4 DATE TMDS 1+ 5 ECRANARE DATE TMDS 1 6 DATE TMDS 1- 7 DATE TMDS 0+ 8 ECRANARE DATE TMDS 0 9 DATE TMDS 0- 10 TACT TMDS+ 11 ECRANARE TACT TMDS 12 TACT TMDS- 13 CEC 14 Rezervat (Neconectat pe dispozitiv) 15 TACT DDC (SCL) 16 DATE DDC (SDA) 17 Împământare DDC/CEC 18 ALIMENTARE +5 V
Capabilitate Plug and Play Puteţi să instalaţi monitorul în orice sistem compatibil Plug and Play. Monitorul furnizează automat sistemului computerului datele sale de identificare a afişajului extins (EDID) prin protocoalele Canal de date afişaj (DDC), astfel încât sistemul să se poată configura automat şi să optimizeze setările monitorului. În cele mai multe cazuri, instalarea monitorului este automată; puteţi să selectaţi alte setări dacă doriţi.
Conector USB upstream Număr pini Latura cu 9 pini a conectorului 1 VCC 2 D- 3 D+ 4 Împământare 5 SSTX- 6 SSTX+ 7 Împământare 8 SSRX- 9 SSRX+ Conector USB downstream Număr pini Latura cu 9 pini a conectorului 1 VCC 2 D- 3 D+ 4 Împământare 5 SSRX- 6 SSRX+ 7 Împământare Despre monitorul dvs.
8 SSTX- 9 SSTX+ Conector USB tip C Număr pini Nume semnal Număr pini Nume semnal A1 Împământare B1 Împământare A2 TX1+ B2 TX2+ A3 TX1- B3 TX2- A4 VBUS B4 VBUS A5 CC B5 VCONN A6 D+ B6 A7 D- B7 A8 SBU1 B8 SBU2 A9 VBUS B9 VBUS A10 RX2- B10 RX1- A11 RX2+ B11 RX1+ A12 Împământare B12 Împământare Porturi USB • 1 x USB tip C - jos • 2 x USB 3.0 upstream - jos • 5 x USB 3.
NOTĂ: Porturile USB de pe monitor funcţionează numai când monitorul este pornit sau în modul inactiv. Dacă opriţi monitorul, apoi îl porniţi, este posibil ca perifericele ataşate să aibă nevoie de câteva secunde pentru a-şi relua funcţionarea normală.
Instalarea monitorului Ataşarea suportului NOTĂ: Suportul este detaşat când monitorul este expediat din fabrică. NOTĂ: Aceste instrucţiuni sunt valabile pentru monitorul cu suport. În cazul cumpărării altui suport, consultaţi instrucţiunile din ghidul de instalare al suportului respectiv. ATENŢIE: Nu scoateţi monitorul din ambalaj înainte de a ataşa suportul. Pentru a ataşa suportul monitorului: 1.
5. Ridicaţi capacul conform ilustraţiei pentru a avea acces la zona VESA pentru asamblarea suportului. 6. Ataşaţi ansamblul suportului la monitor. a. Introduceţi cele două lamele din partea superioară a suportului în canelura din spatele monitorului. b. Pentru fixarea ansamblului suport la monitor, folosiţi o şurubelniţă cu capul în cruce pentru montarea celor patru şuruburi. NOTĂ: Când montaţi ansamblul suport, înclinaţi în sus baza suportului şi asiguraţi-vă că aceasta nu atinge suprafaţa.
7. Montaţi capacul VESA la monitor. a. Introduceţi capacul cu partea inferioară în jos. În acest punct, NU trebuie să fixaţi clapeta. b. Înclinaţi pentru a introduce cele trei lamele din partea superioară a capacului în canelura din spatele monitorului. c. Apăsaţi capacul până când clapeta se fixează cu un clic.
8. Pentru a împiedica alunecarea sau căderea, ţineţi ferm de mânerele monitorului şi ridicaţi-l cu grijă. NOTĂ: Monitorul este foarte greu; manipulaţi-l cu foarte mare atenţie. Se recomandă ca ridicarea sau deplasarea acestui monitor să fie realizate de două persoane.
9. Aşezaţi monitorul pe poziţie şi demontaţi mânerele monitorului. NOTĂ: Monitorul este foarte greu; manipulaţi-l cu foarte mare atenţie. Se recomandă ca ridicarea sau deplasarea acestui monitor să fie realizate de două persoane. ATENŢIE: Nu apăsaţi ecranul când ridicaţi monitorul.
Suport de montare pe perete/Braţ terţ (opţional) NOTĂ: Setul de montare pe perete/Setul cu braţ terţ NU este inclus cu acest monitor. ATENŢIE: Nu scoateţi monitorul din ambalaj înainte de a ataşa suportul din setul de montare pe perete/setul cu braţ terţ. Consultaţi instrucţiunile furnizate împreună cu suportul de montare pe perete compatibil VESA. 1. Ataşaţi suportul de montare la monitor.
2. Pentru a împiedica alunecarea sau căderea, ţineţi ferm de mânerele monitorului şi ridicaţi-l cu grijă. Fixaţi monitorul de suportul pentru montarea pe perete/braţul terţ urmând instrucţiunile corespunzătoare. NOTĂ: Monitorul este foarte greu; manipulaţi-l cu foarte mare atenţie. Se recomandă ca ridicarea sau deplasarea acestui monitor să fie realizate de două persoane. 3. După fixarea monitorului de suportul de perete/braţul terţ, detaşaţi mânerul de monitor.
4. Când utilizaţi două monitoare aşezate unul peste celălalt, montajul trebuie să respecte orientarea afişajului şi unghiul de lucru recomandate, conform descrierii. NOTĂ: Atunci când sunt aşezate unul peste celălalt folosind un braţ terţ, monitorul de deasupra nu trebuie rotit la 180° (vedere). Monitorul nu trebuie orientat la 90° (portret).
Conectarea monitorului AVERTISMENT: Înainte de a începe oricare dintre procedurile din această secţiune, parcurgeţi secţiunea Instrucţiuni privind securitatea. NOTĂ: Nu conectaţi simultan toate cablurile la computer. Pentru a conecta monitorul la computer: 1. Opriţi computerul şi deconectaţi cablul de alimentare. 2. Conectaţi cablul HDMI/DP/USB tip C de la monitor la computer sau dispozitivul USB tip C. Conectarea cablului HDMI NOTĂ: Setarea implicită din fabrică pentru U4919DW este HDMI 2.0.
• Folosiţi butonul pentru a selecta Disable (Dezactivare) şi modificaţi setările. Dacă este nevoie, repetaţi paşii de mai sus pentru a modifica setările formatului HDMI. Conectarea cablului DisplayPort (DP la DP) NOTĂ: Setarea implicită din fabrică pentru U4919DW este DP1.4. Conectarea cablului USB tip C NOTĂ: Utilizaţi doar cablul USB tip C furnizat împreună cu monitorul. • Acest port este compatibil cu modul alternativ DisplayPort DP 1.4.
• • Portul compatibil USB tip C Power Delivery (versiunea PD 2.0) furnizează o putere de până la 90 W. Dacă notebookul dvs. are nevoie de peste 90 W pentru a funcţiona, iar bateria este golită, este posibil ca aceasta să nu poată fi încărcată de la portul USB PD al U4919DW. ATENŢIE: Figurile au doar rol ilustrativ. Aspectul computerului poate să varieze. Conectarea cablului USB 3.
b. Conectaţi două computere * Când conectaţi două computere la monitor, porturile USB downstream pentru tastatură şi mouse ale monitorului pot fi atribuite unor semnale de intrare diferite de la cele două computere modificând setările USB Selection (Selectare USB) din meniul OSD. (Consultaţi USB Selection (Selectare USB) pentru detalii). 4. Porniţi monitorul şi computerul/computerele. Dacă imaginea este afişată pe monitor, instalarea este finalizată.
După ataşarea tuturor cablurilor necesare la monitor şi la computer (vezi secţiunea Conectarea monitorului pentru ataşarea cablurilor), organizaţi toate cablurile conform imaginii de mai sus. Demontarea suportului monitorului NOTĂ: Pentru a preveni zgârierea şi deteriorarea ecranului LCD curbat în timpul demontării suportului, asiguraţi-vă că monitorul este amplasat pe un burete moale şi curat. Contactul direct cu obiecte dure poate deteriora monitorul curbat.
3. Folosiţi o şurubelniţă în cruce pentru a demonta cele patru şuruburi care fixează suportul. 4. Ridicaţi suportul şi separaţi-l de monitor.
Utilizarea monitorului Pornirea monitorului Apăsaţi butonul pentru a porni monitorul. Utilizarea comenzilor de pe panoul din faţă Utilizaţi butoanele de comandă din faţa monitorului pentru a regla setările. Următorul tabel descrie butoanele de pe panoul frontal: Buton de pe panoul frontal Descriere Folosiţi butonul Pornit/Oprit pentru a porni şi a opri monitorul.
Folosiţi acest buton pentru a alege dintr-o listă de moduri de culoare presetate. 2 Tastă de acces rapid/ Preset Modes (Moduri presetate) 3 Tastă de acces rapid/ Brightness/Contrast (Luminozitate/ Contrast) Folosiţi butoanele pentru a regla luminozitatea şi contrastul. Valoarea minimă este '0' (-). Valoarea maximă este '100' (+). Folosiţi acest buton pentru a selecta sursa de intrare.
2 Folosiţi butonul Sus pentru a regla (a creşte) elementele din meniul OSD. Sus 3 Folosiţi butonul Jos pentru a regla (a reduce) elementele din meniul OSD. Jos 4 Folosiţi butonul Accesare pentru a accesa un submeniu. Accesare 5 Folosiţi acest buton pentru a ieşi din meniul principal OSD. Ieşire Utilizarea meniului afişat pe ecran (OSD) Accesarea sistemului de meniuri NOTĂ: Când modificaţi setările şi apoi treceţi la alt meniu sau închideţi meniul OSD, monitorul salvează automat aceste modificări.
2. Apăsaţi butoanele şi pentru a comuta între opţiunile setărilor. Când comutaţi de la o pictogramă la alta, este evidenţiat numele opţiunii. Vezi tabelul următor pentru o listă completă a tuturor opţiunilor disponibile pentru monitor. 3. Apăsaţi o dată butonul 4. Apăsaţi butonul şi pentru a activa opţiunea evidenţiată. pentru a selecta parametrul dorit. 5. Apăsaţi pentru a accesa submeniul şi apoi folosiţi butoanele direcţionale, conform indicaţiilor din meniu, pentru a efectua modificări. 6.
Contrast Reglaţi mai întâi setarea Brightness (Luminozitate), apoi reglaţi setarea Contrast numai dacă mai este necesar. Apăsaţi butonul pentru a spori contrastul şi apăsaţi butonul pentru a reduce contrastul (min. 0 / max. 100). Funcţia Contrast reglează diferenţa dintre zonele întunecate şi zonele luminoase ale imaginii afişate. Input Source Folosiţi meniul Input Source (Sursă intrare) pentru a (Sursă intrare) alege unul din semnalele video conectate la monitor.
HDMI 2 Selectaţi intrarea HDMI 2 când folosiţi conectorul HDMI 2. Apăsaţi butonul intrare HDMI 2. Auto Select (Selectare automată) pentru a selecta sursa de Funcţia vă permite să căutaţi sursele de intrare disponibile.
Color (Culoare) Folosiţi opţiunea Color (Culoare) pentru a regla modul de setare a culorii. Preset Modes Când selectaţi Preset Modes (Moduri presetate), puteţi să alegeţi din lista de opţiuni Standard, (Moduri presetate) ComfortView, Movie (Film), Game (Joc), Color Temp. (Temp. culoare) sau Custom Color (Culoare personalizată). • Standard: Încarcă setările de culoare implicite ale monitorului. Acesta este modul presetat implicit.
2. Clipiţi des pentru a vă umezii ochii sau udaţi-vă ochii cu apă după o utilizare îndelungată a monitorului. 3. Să luaţi pauze regulate şi frecvente, de aproximativ 20 de minute la fiecare două ore. 4. Să vă luaţi ochii de la monitor şi să priviţi la un obiect din depărtare, aflat la circa 20 de picioare, timp de cel puţin 20 de secunde în timpul pauzelor. 5. Efectuaţi întinderi pentru a reduce tensiunea din ceafă, braţe, spate şi umeri în timpul pauzelor.
Input Color Vă permite să setaţi modul de intrare video la: Format (Format RGB: Selectaţi această opţiune dacă monitorul este culoare intrare) conectat la un computer (sau player DVD) printr-un cablu DP, HDMI sau USB tip C. Apăsaţi butonul pentru a selecta modul RGB. YPbPr: Selectaţi această opţiune dacă playerul DVD acceptă doar ieşirea YPbPr. Apăsaţi butonul selecta modul YPbPr. pentru a Hue (Nuanţă) Această funcţie conferă imaginilor video o nuanţă verzuie sau purpurie.
Saturation (Saturaţie) Această funcţie reglează saturaţia culorilor imaginii video. Folosiţi '0' şi '100'. sau pentru a regla saturaţia între Folosiţi video. pentru a spori intensitatea culorilor imaginii Folosiţi video. pentru a spori aspectul monocrom al imaginii NOTĂ: Saturation (Saturaţie) este disponibilă doar când selectaţi modul presetat Movie (Film) sau Game (Joc).
Response Time Vă permite să setaţi funcţia Response Time (Timp de (Timp de răspuns) la Normal sau Fast (Rapid). răspuns) Uniformity Compensation (Compensare uniformitate) Selectaţi setările de compensare a uniformităţii ecranului. Setările calibrării pentru opţiunea Calibrated (Calibrat) sunt preconfigurate din fabrică. Uniformity Compensation (Compensare uniformitate) reglează diferitele zone ale ecranului în raport cu centrul pentru a obţine o luminozitate şi o culoare uniformă pe întreg ecranul.
Fereastră principală USB tip C DP HDMI 1 HDMI 2 USB tip C X Fereastră secundară DP HDMI 1 HDMI 2 X X X NOTĂ: Imaginile din PBP vor fi afişate în centrul ecranului, nu pe ecranul complet. PBP Mode (Modul PBP) Reglaţi modul PBP (Imagine lângă Imagine) între PBP sau Off (Oprit). Apăsaţi butonul pentru a activa modul PBP.
PBP (Sub) (PBP (Secundar)) Selectează diferitele semnale video care pot fi conectate la monitorul dvs. pentru fereastra secundară pentru a selecta semnalul PBP. Apăsaţi butonul sursei ferestrei secundare PBP. USB Select Selectaţi pentru a comuta între sursele upstream USB în Switch modul PBP. Apăsaţi butonul pentru a comuta între (Comutator sursele upstream USB în modul PBP.
Video Swap (Comutare video) Selectaţi pentru a comuta imaginile video între fereastra principală şi fereastra secundară în modul PBP. Apăsaţi pentru a comuta între fereastra principală şi butonul fereastra secundară. Contrast (Sub) Reglează nivelul contrastului imaginii în modul PBP. (Contrast pentru a spori contrastul şi apăsaţi (Secundar)) Apăsaţi butonul butonul pentru a reduce contrastul.
USB Selection Vă permite să setaţi portul USB upstream pentru (Selectare semnalele de intrare (DP, HDMI 1 şi HDMI 2), astfel USB) portul USB downstream al monitorului (de ex. tastatura şi mouse-ul) poate fi folosit de semnalele de intrare curente când conectaţi computerul la oricare dintre porturile upstream. Când folosiţi doar un singur port upstream, portul upstream conectat este activ.
Menu (Meniu) Selectaţi această opţiune pentru a regla setările meniului OSD, cum ar fi limbile meniului OSD, durata de afişare a meniului etc. Language (Limbă) Language (Limbă) permite alegerea uneia dintre cele opt limbi de afişare a meniului OSD (engleză, spaniolă, franceză, germană, braziliană, portugheză, rusă, chineză simplificată sau japoneză). Transparency Selectaţi această opţiune pentru a modifica (Transparenţă) transparenţa meniului apăsând butoanele şi (minim: 0 ~ maxim: 100).
Lock (Blocare) Cu butoanele de comandă de pe monitor blocate, puteţi împiedica accesarea comenzilor de către alte persoane. De asemenea, împiedică activarea accidentală într-o configuraţie de mai multe monitoare amplasate unele lângă celelalte. • Menu Buttons (Butoanele meniului): Toate butoanele meniului/cu funcţii (cu excepţia butonului Pornit/Oprit) sunt blocate şi nu pot fi accesate de către utilizator.
Reset Menu (Resetare meniu) Resetează toate setările OSD la valorile presetate din fabricaţie.
USB-C Charging (Încărcare prin USB-C) Vă permite să activaţi sau să dezactivaţi funcţia Always On USB Type-C Charging (Încărcare USB tip C activată permanent) pe perioada modului Oprire al monitorului. NOTĂ: Această opţiune este disponibilă doar în reviziile firmware mai noi ale monitorului. Monitor Sleep Puteţi să alegeţi dacă monitorul va rămâne pornit sau se (Mod inactiv va opri automat când computerul intră în modul inactiv.
DDC/CI LCD Conditioning (Regenerare LCD) DDC/CI (Canal date afişaj/Interfaţă de comandă) permite reglarea parametrilor monitorului (luminozitate, echilibrul culorilor etc) folosind software de pe computer. Puteţi să dezactivaţi această funcţie selectând Off (Oprit). Activaţi această funcţie pentru o utilizare mai simplă şi performanţe optime ale monitorului. Contribuie la reducerea cazurilor minore de retenţie a imaginii. În funcţie de gradul de retenţie a imaginii, programul poate dura mai mult timp.
Firmware Afişează versiunea firmware a monitorului dvs. Service Tag (Eticheta de service) Afişează numărul de serie de pe eticheta de service a monitorului dvs. Reset Others (Resetare altele) Resetează toate setările din meniul Others (Altele) la valorile din fabricaţie. Factory Reset Restaurează toate valorile preconfigurate la setările (Resetare implicite din fabrică. Acestea sunt şi setările pentru fabricaţie) testele ENERGY STAR®.
Mesaje de avertizare afişate pe ecran (OSD) Când monitorul nu acceptă o anumită rezoluţie, va fi afişat următorul mesaj: NOTĂ: Mesajul poate să fie uşor diferit, în funcţie de semnalul de intrare conectat. Acesta înseamnă că monitorul nu se poate sincroniza cu semnalul primit de la computer. Vezi Specificaţiile monitorului pentru informaţii despre intervalele de frecvenţe orizontale şi verticale acceptate de acest monitor. Modul recomandat este 5120 x 1440.
Atunci când modificaţi setarea implicită a funcţiei de economisire a energiei pentru prima dată, cum ar fi Uniformity Compensation (Compensare uniformitate), USB-C Charging (Încărcare prin USB-C), USB-A Charging (Încărcare prin USB-A) sau Monitor Sleep (Mod inactiv monitor), va fi afişat următorul mesaj: NOTĂ: Dacă selectaţi Yes (Da) pentru oricare dintre funcţiile menţionate mai sus, mesajul nu va fi afişat data următoare când intenţionaţi să modificaţi setările acestor funcţii.
Dacă apăsaţi orice buton cu excepţia butonului Pornit/Oprit, va fi afişat următorul mesaj, în funcţie de intrarea selectată: NOTĂ: Mesajul poate să fie uşor diferit, în funcţie de semnalul de intrare conectat. Dacă aţi selectat intrarea USB tip C, HDMI sau DP şi cablul corespunzător nu este conectat, este afişată o fereastră de dialog flotantă ca cea de mai jos. NOTĂ: Mesajul poate să fie uşor diferit, în funcţie de semnalul de intrare conectat.
Când este selectată funcţia Factory Reset (Resetare fabricaţie) este afişat următorul mesaj: Când este selectată opţiunea Yes (Da) este afişat următorul mesaj: Vezi Remedierea problemelor pentru informaţii suplimentare.
Setarea rezoluţiei maxime Pentru a seta rezoluţia maximă a monitorului: În Windows® 7, Windows® 8 şi Windows® 8.1: 1. Numai în Windows® 8 şi Windows® 8.1 selectaţi dala Desktop pentru a comuta la desktopul clasic. 2. Faceţi clic dreapta pe desktop şi faceţi clic pe Rezoluţie ecran. 3. Faceţi clic pe lista verticală Rezoluţie ecran şi selectaţi 5120 x 1440. 4. Faceţi clic pe OK. În Windows® 10: 1. Faceţi clic dreapta pe desktop şi faceţi clic pe Setări afişare. 2.
Setarea comutatorului KVM USB Pentru a seta comutatorul KVM USB ca tastă de acces rapid pentru monitor: 1. Apăsaţi butonul 2. Apăsaţi butoanele 3. Apăsaţi butonul pentru a lansa meniul OSD şi a afişa meniul principal. şi pentru “Personalize” (Personalizare). pentru a activa opţiunea evidenţiată. 4. Apăsaţi butonul pentru Shortcut Key 1 (Tastă de acces rapid 1), pentru a activa opţiunea evidenţiată. 5. Apăsaţi butoanele selectare USB).
6. Apăsaţi butonul pentru a confirma selecţia. 7. Apăsaţi butonul pentru a reveni la meniul principal. NOTĂ: Funcţia Comutator KVM USB funcţionează doar în Modul PBP. Următoarele reprezintă ilustraţii pentru diverse scenarii de conectare şi setările lor de meniu USB Selection (Selectare USB), conform descrierii în cadrele colorate corespunzătoare. 1. Când conectaţi HDMI 1 + USB 1 la computerul 1 şi DP + USB tip C la computerul 2: NOTĂ: În prezent, conexiunea USB tip C acceptă doar transfer de date.
2. Când conectaţi HDMI 1 + USB 1 la computerul 1 şi HDMI 2 + USB 2 la computerul 2: Asiguraţi-vă că USB Selection (Selectare USB) pentru HDMI 1 este setată pe USB 1 iar HDMI 2 este setată pe USB 2.
3. Când conectaţi HDMI 1 + USB 1 la computerul 1 şi USB tip C la computerul 2: NOTĂ: În prezent, conexiunea USB tip C acceptă transfer video şi de date. Asiguraţi-vă că USB Selection (Selectare USB) pentru HDMI 1 este setat pe USB 1. NOTĂ: Deoarece portul USB tip C acceptă Modul alternativ DisplayPort, nu este nevoie să setaţi USB Selection (Selectare USB) pentru USB Type-C (USB tip C).
Setarea funcţiei KVM automat Puteţi urma instrucţiunile de mai jos pentru a configura funcţia KVM automat pentru monitorul dvs.: 1. Asiguraţi-vă că PBP Mode (Modul PBP) este Off (Oprit). 2. Asiguraţi-vă că Auto Select (Selectare automată) este On (Pornit) şi Auto Select for USB-C (Selectare automată pentru USB-C) este Yes (Da).
3. Asiguraţi-vă că porturile USB şi intrările video sunt asociate corect. NOTĂ: Pentru conexiunea USB tip C nu mai este necesară nicio altă setare.
Înclinarea, rotirea şi extinderea verticală NOTĂ: Aceste instrucţiuni sunt valabile pentru monitorul cu suport. În cazul cumpărării altui suport, consultaţi instrucţiunile din ghidul de instalare al suportului respectiv. Înclinarea, rotirea Cu suportul montat pe monitor, puteţi să înclinaţi şi să rotiţi monitorul pentru a obţine cel mai confortabil unghi de vizionare. NOTĂ: Suportul este detaşat când monitorul este expediat din fabrică.
Extinderea verticală NOTĂ: Suportul se extinde vertical cu până la 90 mm. Figura de mai jos ilustrează modul în care se extinde vertical suportul. Configuraţie cu două monitoare Configuraţie recomandată pentru două monitoare: Vedere (sus-jos) Din cauza restricţiilor privind lungimea cablului (1 m) pentru cablurile USB tip C Gen2, se recomandă următorul mod de conectare a monitoarelor: • Conectaţi monitorul superior cu un cablu HDMI/DP. • Conectaţi monitorul inferior cu un cablu HDMI/DP/USB tip C Gen2.
Remedierea problemelor AVERTISMENT: Înainte de a începe oricare dintre procedurile din această secţiune, parcurgeţi secţiunea Instrucţiuni privind securitatea. Testarea automată Monitorul oferă o funcţie de testare automată care vă permite să verificaţi dacă monitorul funcţionează corect. Dacă monitorul şi computerul sunt corect conectate, însă ecranul monitorului rămâne întunecat, efectuaţi testarea automată parcurgând următoarele etape: 1. Opriţi computerul şi monitorul. 2.
Diagnosticare încorporată Monitorul încorporează un instrument de diagnosticare care vă ajută să aflaţi dacă problema întâmpinată este cauzată de monitor sau de computer şi de placa video. NOTĂ: Puteţi să folosiţi diagnosticarea încorporată numai când cablul video este deconectat şi monitorul este în modul de testare automată. Pentru a folosi diagnosticarea încorporată: 1. Asiguraţi-vă că ecranul este curat (fără particule de praf pe suprafaţa ecranului). 2.
Încărcare USB tip C activată permanent Monitorul vă permite să încărcaţi notebook-ul sau dispozitivele mobile prin cablul USB tip C, chiar şi atunci când monitorul este oprit. Vezi USB-C Charging (Încărcare prin USB-C) pentru informaţii suplimentare. Această caracteristică este disponibilă doar pentru revizia firmware M2B102 a monitorului sau pentru versiuni mai recente. Puteţi verifica revizia firmware actuală în Firmware.
Video lipsă/ LED Pornit/ Oprit aprins Imagine lipsă • Sporiţi luminozitatea şi contrastul folosind sau luminozitate meniul OSD. lipsă • Folosiţi funcţia de verificare automată a monitorului. • Verificaţi dacă nu există pini îndoiţi sau rupţi în conectorul cablului video. • Folosiţi diagnosticarea încorporată. • Asiguraţi-vă că în meniul Input Source (Sursă intrare) este selectată sursa de intrare corectă.
Probleme cu luminozitatea Imaginea este prea întunecată sau prea luminoasă • Resetaţi monitorul la setările din fabricaţie. Distorsiuni geometrice Ecranul nu este corect centrat • Resetaţi monitorul la setările din fabricaţie. Linii orizontale/ verticale Ecranul afişează • Resetaţi monitorul la setările din fabricaţie. una sau mai • Folosiţi funcţia de testare automată a multe linii monitorului şi aflaţi dacă liniile apar şi în modul de testare automată.
Culoare lipsă Imaginea nu are culoare • Folosiţi funcţia de verificare automată a monitorului. • Asiguraţi-vă că cablul video care conectează monitorul la computer este conectat corect şi este fixat. • Verificaţi dacă nu există pini îndoiţi sau rupţi în conectorul cablului video. Culoare incorectă Culoarea imaginii este incorectă • Modificaţi setările din Preset Modes (Moduri presetate) din meniul OSD Color (Culoare) în funcţie de aplicaţie.
Probleme specifice produsului Simptome specifice Imaginea afişată este prea mică Monitorul nu poate fi reglat folosind butoanele de pe panoul frontal Ce experimentaţi Soluţii posibile Imaginea este centrată pe ecran, însă nu umple întreaga zonă de vizionare • Verificaţi setarea Aspect Ratio (Raport de aspect) din meniul OSD Display (Afişare). Meniul OSD nu este afişat • Opriţi monitorul, deconectaţi cablul de alimentare, conectaţi-l la loc, apoi porniţi monitorul.
Fără video, Fără afişaj Fără video la conectarea staţiei de andocare, a cheii hardware sau playerelor DVD Blu-ray • Deoarece platforma veche nu poate recunoaşte şi nu poate scoate o rezoluţie de 5120 x 1440, vă recomandăm să modificaţi setarea EDID la o rezoluţie mai mică, pentru a trece peste această problemă de compatibilitate: 1. Scoateţi toate cablurile de intrare, apoi apăsaţi butoanele 3 şi 4 timp de 5 secunde. (Pentru numerele butoanelor, consultaţi pagina 75) 2.
Monitorul afişează imaginea la 3840 x 1080 @ 60 Hz când se utilizează placa grafică Intel. Nu se poate selecta 5120 x 1440 @ 60 Hz cu: Intel CPU Gen10 sau mai veche şi Intel Graphic Driver x.7584 şi versiuni ulterioare. • Intel a dezactivat suportul pentru modul 5K începând cu Graphic Driver x.7584; utilizatorii trebuie să instaleze Windows Registry Patch, care activează suportul pentru modul 5K cu Graphic Driver x.7584. Accesaţi https://www.dell.
Portul USB tip C nu furnizează energie Perifericele USB nu pot fi încărcate • Verificaţi dacă dispozitivul conectat respectă specificaţia USB-C. Portul USB tip C este compatibil cu USB 2.0 şi o ieşire de 90 W. • Asiguraţi-vă că utilizaţi cablul USB tip C furnizat împreună cu monitorul dvs. Interfaţa USB 3.0 de înaltă viteză este lentă Perifericele USB 3.0 de înaltă viteză funcţionează lent sau nu funcţionează deloc • Verificaţi dacă computerul este compatibil cu interfaţa USB 3.0.
Anexă AVERTISMENT: Instrucţiuni privind securitatea AVERTISMENT: Utilizarea unor comenzi, reglaje sau proceduri diferite de cele specificate în această documentaţie poate să cauzeze şoc electric, pericole de ordin electric şi/sau pericole de ordin mecanic. Pentru informaţii despre instrucţiunile privind securitatea, consultaţi Informaţii despre securitate, mediu şi omologare (SERI). Notificări FCC (numai în S.U.A.