Dell UltraSharp UP2716DA Uživatelská příručka Model: UP2716DA Regulatorní model: UP2716Dt
POZNÁMKA: POZNÁMKA označuje důležité informace, které pomáhají lépe využít počítač. POZOR: Slovo POZOR upozorňuje na možné poškození hardwaru nebo ztrátu dat v případě nedodržení pokynů. VAROVÁNÍ: Slovo VAROVÁNÍ varuje před možným poškozením majetku, zraněním nebo smrtí. Copyright © 2020 Dell Inc. Všechna práva vyhrazena. Tento výrobek je chráněn zákony na ochranu autorských práv a duševního vlastnictví Spojených států a mezinárodními zákony na ochranu autorských práv a duševního vlastnictví.
Obsah O tomto monitoru . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Obsah balení . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Vlastnosti produktu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Součásti a ovládací prvky . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Ttechnické údaje monitoru . . . . . . . . . . . .
Integrovaná diagnostika . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Obecné problémy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Specifické problémy s produktem . . . . . . . . . . . . . . . . . . . . . .53 Příloha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Bezpečnostní pokyny . . . . . . . . . . . . . . . . . . . .
O tomto monitoru Obsah balení Tento monitor je dodáván s níže uvedenými součástmi. Zkontrolujte, zda jste obdrželi všechny součásti a pokud některá chybí, kontaktujte společnost Dell. POZNÁMKA:Některé položky mohou být volitelné a nemusí být v monitorem dodány. Některé funkce nebo média nemusejí být v některých zemích k dispozici.
Propojovací USB 3.0 kabel (pro aktivaci USB konektorů na monitoru) Kabel DP (mDP na DP) • Návod pro rychlou instalaci • Bezpečnostní a právní informace • Tovární kalibrační sestava Vlastnosti produktu Monitor Dell UltraSharp UP2716DA je vybaven displejem z tekutých krystalů (LCD) s aktivní matricí, technologií THF (Thin-Film Transistor) a podsvícením LED. Mezi vlastnosti tohoto monitoru patří: • Viditelná plocha (úhlopříčka) 68,47 cm (27 palců).
Součásti a ovládací prvky Pohled zepředu Pohled zepředu Ovládací prvky na předním panelu Štítek 1 2 Popis Tlačítka funkcí (další informace viz část Ovládání monitoru) Vypínač (s indikátorem LED) Když indikátor svítí bíle, monitor je zapnutý a normálně funguje. Když bílý indikátor bliká, monitor se nachází v pohotovostním režimu.
Pohled zezadu Štítek Popis 1 Montážní otvory VESA 100 mm x 100 mm (pod krytem VESA) Použití Připevněte monitor na stěnu pomocí sady držáku na stěnu standardu VESA (100 mm x 100 mm). Obsahuje přehled schválení podle úředních vyhlášek. Uvolněte stojánek z monitoru. 2 Štítek s úředními údaji 3 Tlačítko pro uvolnění stojánku 4 Otvor zámku pro zabezpečení Zajištění monitoru lankovým zámkem (nutno zakoupit samostatně).
Pohled ze strany Vstupní port USB (Port s ikonou blesku je určen pro BC 1.2) Pohled zdola Štítek Popis 1 Konektor střídavého napájení 2a Port HDMI 1 2b 3 4 5 Port HDMI 2 Konektor DP (vstup) Konektor mDP (vstup) Konektor DP (výstup) 6 Port linkového výstupu zvuku Použití Slouží k připojení napájecího kabelu monitoru. Připojte počítač pomocí kabelu HDMI. Připojte DP kabel počítače. Připojte počítač pomocí kabelu mDP na DP. Výstup DP pro monitor podporující technologii MST (Multi-Stream Transport).
7a USB port k počítači 1 7b USB port k počítači 2 8 Vstupní port USB (2) 9 Zámek stojánku Connect the USB cable that comes with your monitor to the computer. Once this cable is connected, you can use the USB downstream connectors on the monitor. Připojte svá zařízení USB. Tyto konektory lze použít pouze po připojení kabelu USB k počítači a výstupnímu konektoru USB na monitoru. Možnost upevnit stojan k monitoru šroubem M3 x 6 (není součástí dodávky).
Specifikace rozlišení Rozsah horizontální frekvence Rozsah vertikální frekvence Maximální přednastavené rozlišení Možnosti zobrazení videa (přehrávání DP a HDMI) 30 - 88 kHz 50 - 75 Hz 2560 X 1440 při 60 Hz 480i, 480p, 576i, 576p, 720p, 1080i, 1080p,QHD Předvolené režimy zobrazení Režim zobrazení Horizontální frekvence (kHz) Vertikální frekvence (Hz) Takt pixelů (MHz) Polarita synch.
Režimy MST (Multi-Stream Transport, víceproudový přenos) Maximální počet podporovaných externích monitorů Zdrojový monitor MST 2560 x 1440/60 Hz 1920 x 1200/60 Hz 1920 x 1080/60 Hz 2560 x 1440/60 Hz 1 2 2 POZNÁMKA: Maximální podporované rozlišení externího monitoru je pouze 2560 x 1440 při 60 Hz. Elektrické údaje Signály videovstupu Vstupní střídavé napětí / frekvence / proud Zapínací proud příkon • Signál digitálního videa pro každý rozdílový řádek. Na rozdílový řádek při impedanci 100 ohmů.
Fyzické vlastnosti Model Typ konektoru Typ signálního kabelu Rozměry (se stojánkem): Výška (vysunutý) Výška (zasunutý) Šířka Hloubka Rozměry (bez stojánku): Výška Šířka Hloubka Rozměry stojánku: Výška (vysunutý) Výška (zasunutý) Šířka Hloubka Hmotnost: • DP (HDCP 1.4) konektor (včetně vstupu DP a výstupu DP) • mDP (HDCP 1.4) konektor • HDMI 1/HDMI 2 (HDCP 1.4) konektor • Linkový výstup zvuku • Konektor portu vstupu datového proudu USB 3.0 • 4 konektory portu vstupu datového proudu USB 3.
Vlastnosti prostředí Model Teplota: Provozní Mimo provoz Vlhkost: Provozní Mimo provoz Nadmořská výška: Provozní Mimo provoz Tepelný rozptyl 14 | O tomto monitoru 0°C až 35°C (32°F až 95°F) -20°C až 60°C (-4°F až 140°F) 10% až 80% (bez kondenzace) 5% až 90% (bez kondenzace) Max. 5 000 m (16 404 stop) max. 12 192 m (40 000 stop) 443,7 BTU/hod. (maximum) 104,07 BTU/hod.
Uspořádání konektorů Konektor DP (vstup) Číslo kolíku 20 kolíková strana připojeného signálního kabelu 1 ML3(n) 2 GND 3 ML3(p) 4 ML2(n) 5 GND 6 ML2(p) 7 ML1(u) 8 GND 9 ML1(p) 10 ML0(n) 11 GND 12 ML0(p) 13 CONFIG1 14 CONFIG2 15 AUX CH(p) 16 GND 17 AUX CH(n) 18 Detekce rychlého připojení 19 Zpět 20 DP_PWR O tomto monitoru | 15
Konektor DP (výstup) Číslo kolíku 20 kolíková strana připojeného signálního kabelu 1 ML0(p) 2 GND 3 ML0(n) 4 ML1 (p) 5 GND 6 ML1 (n) 7 ML2 (p) 8 GND 9 ML2(n) 10 ML3(p) 11 GND 12 ML3(n) 13 CONFIG1 14 CONFIG2 15 AUX CH(p) 16 GND 17 AUX CH(n) 18 Detekce rychlého připojení 19 Zpět 20 DP_PWR 16 | O tomto monitoru
Konektor mDP Číslo kolíku 20 kolíková strana připojeného signálního kabelu 1 GND 2 Detekce rychlého připojení 3 ML3(n) 4 CONFIG1 5 ML3(p) 6 CONFIG2 7 GND 8 GND 9 ML2(n) 10 ML0(p) 11 ML2(p) 12 ML0(p) 13 GND 14 GND 15 ML1(n) 16 AUX(p) 17 ML1(p) 18 AUX(n) 19 GND 20 DP_PWR O tomto monitoru | 17
Konektor HDMI Číslo kolíku 19 kolíková strana připojeného signálního kabelu 1 TMDS DATA 2+ 2 TMDS DATA 2 STÍNĚNÍ 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 TMDS DATA 1 STÍNĚNÍ 6 TMDS DATA 1- 7 TMDS DATA 0+ 8 TMDS DATA 0 STÍNĚNÍ 9 TMDS DATA 0- 10 TMDS TAKT+ 11 TMDS TAKT STÍNĚNÍ 12 TMDS TAKT- 13 CEC 14 Vyhrazeno (N.C.
Rozhraní Universal Serial Bus (USB) Tato část obsahuje informace o portech USB monitoru. POZNÁMKA: Až 2 A na vstupním portu USB (port s ikonou blesku) se zařízeními kompatibilními s BC 1.2; až 0,9 A na ostatních 3 výstupních portech USB. Váš počítač je vybaven následujícími porty USB: • 2 výstupní - na dolní straně • 4 vstupní - 2 na levé straně, 2 dole Nabíjecí port – na zadním krytu (port s ikonou blesku ); podporuje rychlé nabíjení, pokud je zařízení kompatibilní s BC 1.2.
Plug-and-Play Tento monitor lze nainstalovat do jakéhokoli počítače, který je kompatibilní s technologií Plug-and-Play. Monitor počítači automaticky poskytne své údaje EDID (Extended Display Identification Data) pomocí protokolů DDC (Display Data Channel): počítač se může sám zkonfigurovat a optimalizovat nastavení monitoru. Většina instalací monitoru je automatická; podle potřeby můžete vybrat jiná nastavení. Další pokyny pro změnu nastavení monitoru viz Ovládání monitoru.
Instalace monitoru Montáž stojánku POZNÁMKA: Zvedák a podstavec stojánku jsou z výroby dodávány oddělené od monitoru. POZNÁMKA: Následující postup platí pro výchozí stojánek. Pokud jste zakoupili jiný stojánek, vyhledejte pokyny pro instalaci v dokumentaci dodané se stojánkem. POZOR: Položte monitor na rovný, čistý a měkký povrch, aby se zabránilo poškrábání zobrazovacího panelu. Upevnění stojanu monitoru: • Sejměte ochranný kryt monitoru a položte monitor přední stranou dolů.
• Uchopte podstavec stojánku tak, aby značka trojúhelníku směřovala nahoru. • Zorientujte výstupky podstavce stojánku s příslušným otvorem na stojánku. • Zasuňte výstupky podstavce stojánku zcela do otvoru na stojánku.
• Zvedněte rukojeť šroubu a otáčejte šroubem po směru hodin. • Jakmile šroub zcela utáhnete, sklopte rukojeť šroubu do zářezu.
Náklon, otočení a svislé vysunutí POZNÁMKA: Platí pro monitor se stojánkem. Zakoupíte-li jiný stojánek, postupujte podle návodu na instalaci příslušného stojánku. Náklon, otočení a svislé vysunutí Když je k monitoru připevněn stojánek, lze monitor naklonit pro dosažení optimálního pozorovacího úhlu. POZNÁMKA: Stojánek je z výroby dodáván oddělený od monitoru.
POZNÁMKA: Pro použití funkce Display Rotation (Otočení zobrazení) (na šířku nebo na výšku) u vašeho počítače Dell je vyžadován aktualizovaný grafický ovladač, který není dodáván k tomuto monitoru. Nejnovější grafický ovladač lze stáhnout na www. dell.com/support v části Download - Video Drivers (Stáhnout - video ovladače). POZNÁMKA: Při otočení monitoru na výšku může dojít ke snížení výkonu u graficky náročných aplikací (hraní 3D her atd.).
Připojení kabelu DP (nebo mDP) POZNÁMKA: Výchozí je port DP. Vyberte vstupní zdroj na monitoru pro přepnutí na mDP. Připojení kabelu HDMI (volitelné) Připojení k monitoru pro funkci DP MST (Multi-Stream Transport) POZNÁMKA: podporují funkci DP MST. Aby bylo možné tuto funkci využít, musí být grafická karta v počítači certifikována pro DP1.2 v možností MST. POZNÁMKA: Před použitím konektoru výstupu DP sejměte gumovou krytku.
Připojení kabelu USB 3.0 Po připojení kabelů DP-mDP připojte podle následujících pokynů k počítači kabel USB 3.0 a dokončete konfiguraci monitoru: 1 a. Připojení jednoho počítače Propojte USB 3.0 pro počítač (kabel je součástí dodávky) k vhodnému portu USB 3.0 na počítači. b. Připojení dvou počítačů Výstupní porty USB 3.0 připojte k příslušným portům USB 3.0 dvou počítačů. Potom v nabídce OSD vyberte mezi dvěma zdroji výstupu USB a vstupními zdroji. Viz USB Select Switch (Přepínač USB).
Uspořádání kabelů Po připojení všech nezbytných kabelů k monitoru a k počítači (pokyny pro připojení kabelů viz část Připojení monitoru) uspořádejte všechny kabely podle obrázku výše. Demontáž stojánku monitoru POZOR: Aby při demontáži stojanu nedošlo k poškrábání LCD zobrazovače, položte monitor na čistý a měkký povrch. POZNÁMKA: Následující postup platí pro výchozí stojánek. Pokud jste zakoupili jiný stojánek, vyhledejte pokyny pro instalaci v dokumentaci dodané se stojánkem.
Upevnění na stěnu (volitelné) POZNÁMKA: Připevněte monitor k nástěnnému držáku šrouby M4 x 10 mm. Viz pokyny dodané s VESA sadou pro montáž na stěnu. 1 Položte monitor na měkkou látku nebo polštář na stabilním rovném stole. 2 Sejměte stojánek. 3 Pomocí křížového šroubováku odmontujte čtyři šrouby, které zajišťují plastový kryt. 4 Připevněte montážní konzolu pro sadu pro montáž‑na stěnu k monitoru. 5 Namontujte monitor na stěnu podle pokynů dodaných se sadou pro montáž na stěnu.
Používání monitoru Zapnutí monitoru Stisknutím tlačítka zapněte monitor. Používání ovládacích prvků na předním panelu Pomocí ovládacích tlačítek na přední straně monitoru můžete upravit nastavení charakteristik zobrazeného obrazu. V případě použití těchto tlačítek k úpravám nastavení zajišťuje funkce OSD (on-screen display) aktuální zobrazení jejich číselných hodnot.
Následující tabulka obsahuje popis tlačítek na předním panelu: Tlačítko‑na předním panelu 1 Popis Tohoto tlačítko slouží k výběru se seznamu režimů předvoleb barev. Rychlé tlačítko: Přednastavené režimy 2 Toto tlačítko můžete použít k přímému přístupu do ovládacího menu Brightness/Contrast (Jas/Kontrast). Shortcut key/Brightness/ Contrast (Rychlé tlačítko/ Jas/Kontrast) 3 Toto tlačítko slouží k výběru ze seznamu vstupních zdrojů.
Tlačítko‑na předním panelu Pomocí tlačítek na přední straně monitoru můžete upravit nastavení obrazu. Tlačítko‑na předním panelu 1 Popis Tlačítka Nahoru (zvýšení) a Dolů (snížení) slouží k nastavování položek v nabídce OSD. Nahoru Dolů 2 Stisknutím tlačítka OK potvrdíte výběr. OK 3 Stisknutím tlačítka Back (Zpět) se vrátíte na předchozí nabídku.
Používání nabídky na obrazovce (OSD) Přístup k systémové nabídce POZNÁMKA: Veškeré změny provedené v nabídce OSD se automaticky uloží, když přejdete do jiné nabídky OSD, když ukončíte nabídku OSD nebo když počkáte, než nabídka OSD zmizí. 1 Stisknutím tlačítka spustíte nabídku OSD a zobrazíte hlavní nabídku. 2 Stisknutím tlačítek a můžete přecházet mezi volbami. Zároveň s přechodem z jedné ikony na druhou dojde ke zvýraznění názvu dané volby. 3 Jedním stisknutím tlačítka nebo aktivujte označenou volbu.
Ikona Nabídka a podnabídky Popis Jas / Kontrast Tuto nabídku použijte k aktivaci pro úpravu jasu nebo kontrastu. Jas Kontrast Volba Jas slouží k nastavení luminance podsvícení (minimum 0; maximum 100). Stisknutím tlačítka zvýšíte jas. Stisknutím tlačítka snížíte jas. POZNÁMKA: Když je zapnutý dynamický kontrast, je ruční nastavení jasu deaktivováno. Nejdříve upravte Jas a pak Kontrast – pouze v případě nutnosti další úpravy.
Ikona Nabídka a podnabídky Zdroj vstupu DP Popis Nabídka Vstupní zdroj slouží k výběru různých vstupů videa, které lze připojit k monitoru. Když jsou počítač a monitor propojeny kabelem DP vyberte volbu DP (DisplayPort) a stiskněte tlačítko. mDP Stisknutím vyberte vstupní zdroj DP. Když jsou počítač a monitor propojeny kabelem mDP vyberte volbu mDP (mini DisplayPort) a stiskněte tlačítko. HDMI 1 Stisknutím vyberte vstupní zdroj mDP.
Ikona Nabídka a podnabídky Nastavení Barev Režimy předvoleb Popis Pomocí nabídky Barva upravte režim nastavení barvy. Po výběru možnosti Režimy předvoleb můžete v seznamu vybrat možnosti Standardní, Multimédia, Film, Hra, Papír, Teplota barev, Barevný prostor nebo Vlastní Barva. • Standardní: Výchozí nastavení barev. Toto je výchozí režim předvolby. • Multimédia: Ideální pro multimediální aplikace. • Film: Ideální pro filmy. • Hra: Ideální pro většinu her.
Ikona Nabídka a podnabídky Popis –Adobe RGB: Tento režim je kompatibilní s Adobe RGB (100% pokrytí). –sRGB: Emuluje 100 % sRGB. –Rec 709: Tento režim odpovídá standardu 100% Rec 709. –DCI-P3: Tento režim reprodukuje 98% digitálního barevného kinostandardu DCI-P3. –CAL1/CAL2: Režim předvoleb s uživatelskou kalibrací za použití Dell Ultrasharp Color Calibration Software nebo jiného softwaru schváleného společností Dell.
Ikona Nabídka a podnabídky Popis • Custom Color (Vlastní Barva): Umožňuje ručně upravovat nastavení barev. Stisknutím tlačítka a upravte hodnoty Červená, Zelená a Modrá a vytvořte vlastní režim předvoleb barev. Pomocí tlačítek a vyberte Gain (Zesílení), Offset (Odchylka), Hue (Odstín), Saturation (Sytost). – Gain (Zesílení): Slouží k nastavení úrovně zesílení vstupního signálu RGB (výchozí hodnota je 100).
Ikona Nabídka a podnabídky Gamma Reset Color (Resetovat nastavení barvy) Nastavení zobrazení Popis Umožňuje provést nastavení Gamma na PC nebo MAC. Obnoví výchozí tovární nastavení barev monitoru. Nabídka Nastavení zobrazení slouží k nastavení obrazu. Poměr Stran Slouží k nastavení poměru stran obrazu, například Širokoúhlý 16:9, 4:3 nebo 1:1.
Ikona Nabídka a podnabídky Uniformity Compens ation (Kompen zace rovnoměr nosti) Popis Slouží k výběru nastavení kompenzace rovnoměrnosti jasu a barev obrazovky. Calibrated (Kalibrováno) je výchozí továrně kalibrované nastavení. Uniformity Compensation (Kompenzace rovnoměrnosti) upravuje různé oblasti na obrazovce vůči středu pro dosažení jednotného jasu a barev na celé obrazovce. Display Info Zobrazí aktuální nastavení monitoru.
Ikona Nabídka a podnabídky Režim PIP/ PBP Popis Upravuje model PBP (Obraz vedle obrazu) na PIP Small (PIP malý), PIP Large (PIP velký), PBP Aspect Ratio (PBP poměr stran) nebo PBP Fill (PBP výplň). Tuto funkci lze deaktivovat výběrem volby Off (Vyp.). PIP I PBP poměr stran I II PBP výplň I PIP/PBP (Sub) PIP Location (Umístění PIP) USB Select Switch (Přepínač USB) Video Swap (Záměna videa) Contrast (Sub) (Kontrast (dílčí okno)) II Vyp.
Ikona Nabídka a podnabídky Popis USB Selection Vyberte signály výstupu USB ze seznamu: DP, mDP, HDMI. (Výběr USB) Tak mohou vstupní port USB monitoru (tzn. klávesnice a myš) využívat aktuální vstupní signály při připojení počítače k některému z výstupních portů. Připojení monitoru a výstupních portů USB lze měnit výběrem funkce vstupního zdroje. Když používáte pouze jeden výstupní port, je aktivní připojený výstupní port.
Ikona Nabídka a podnabídky Popis Zvuk Audio Source Obnovit nastavení zvuku Energie Indikátor LED napájení USB Obnovit nastavení napájení Umožňuje nastavit zdroj zvuku v hlavním nebo dílčím okně. Výběrem této volby budou obnovena výchozí Zvuk. Umožňuje nastavit stav indikátoru napájení pro úsporu energie. Umožňuje aktivovat nebo deaktivovat funkci USB během pohotovostního režimu monitoru.
Ikona Nabídka a podnabídky Popis Nastavení nabídky Touto volbou zpřístupníte nastavení nabídky OSD, jako je například jazyk, doba zobrazení atd. Jazyk Otáčení Slouží k nastavení jednoho z osmi jazyků nabídky OSD. Angličtina, španělština, francouzština, němčina, brazilská portugalština, ruština, zjednodušená čínština nebo japonština. Otočí nabídku OSD o 90° proti směru hodin. Nabídku lze přizpůsobit podle natočení monitoru. Průhlednost Po výběru této volby nastavíte průhlednost nabídky pomocí a (min.
Ikona Nabídka a podnabídky Přizpůsobit Popis Vyberte Preset Modes (Režimy předvoleb), Brightness/ Contrast (Jas/kontrast), Input Source (Vstupní zdroj), Aspect Ratio (Poměr stran), Rotation (Otáčení), PIP/PBP Modes (Režimy PIP/PBP), USB Select Switch (Přepínač USB) nebo Video Swap (Záměna videa) a nastavte jako zástupce. Obnovit Slouží k obnovení výchozích továrních nastavení rychlých Přizpůsobení tlačítek.
Ikona Nabídka a podnabídky Popis DDC/CI DDC/CI (Display Data Channel/Command Interface) umožňuje upravovat nastavení monitoru pomocí softwaru v počítači. Výběrem volby Deaktivovat vypnete tuto funkci. V zájmu nejlepšího uživatelského zážitku a optimálního výkonu monitoru ponechte tuto funkci povolenou. Stabilizace LCD Pomáhá opravit drobné projevy vypalování obrazu. V závislosti na stupni vypálení se tato funkce může projevit až po delší době. Výběrem volby Aktivovat zahájíte proces.
Varovné zprávy OSD Když je aktivována funkce Dynamic Contrast (Dynamický kontrast) (v těchto režimech předvoleb: Game (Hra) nebo Movie (Film)), je ruční nastavení jasu deaktivováno. Když monitor nepodporuje konkrétní režim rozlišení, zobrazí se následující zpráva: To znamená, že se monitor nemůže sesynchronizovat se signálem, který přijímá z počítače. Rozsahy horizontálních a vertikálních frekvencí tohoto monitoru viz část Technické údaje monitoru. Doporučený režim je 2560 x 1440.
Po stisknutí některého tlačítka vyjma vypínače se v závislosti na vybraném vstupu zobrazí jedna z následujících varovných zpráv: Když zapnete pohotovostní režim v části Přizpůsobit, zobrazí se následující zpráva: Pokud je nastaven jas nad výchozí úroveň 75 %, zobrazí se následující zpráva: Pokud je vybrán vstup DP nebo mDP nebo HDMI 1 nebo HDMI 2 a příslušný kabel není připojen, zobrazí se následující místní dialogové okno.
nebo nebo Další informace naleznete v části Odstraňování problémů.
Odstraňování problémů VAROVÁNÍ: Před prováděním postupů v této části si přečtěte Bezpečnostní pokyny. Automatický test Tento monitor obsahuje funkci autotest, která umožňuje zkontrolovat správnou funkci displeje. Pokud jsou monitor a počítač správně zapojeny ale jeho obrazovka zůstane tmavá, spusťte funkci autotest displeje provedením následujícího postupu: 1 Vypněte počítač a monitor. 2 Odpojte kabel monitoru ze zadní strany počítače.
nebo 4 Toto dialogové okno se rovněž zobrazí při normálním provozu systému, dojde-li k odpojení nebo poškození videokabelu. 5 Vypněte monitor a znovu zapojte videokabel. Pak zapněte počítač i monitor. Pokud po provedení předchozího postupu zůstane obrazovka monitoru prázdná, zkontrolujte grafickou kartu a počítač, protože monitor funguje správně.
obrazovce. Po zobrazení bílé obrazovky je test dokončen. Operaci ukončíte dalším stisknutím tlačítka 4. Pokud pomocí integrovaného diagnostického nástroje nezjistíte na obrazovce žádné abnormality, monitor funguje správně. Zkontrolujte grafickou kartu a počítač.
Obvyklé příznaky Zjištěné projevy Možná řešení Potíže s jasem Obraz je příliš tmavý nebo světlý • Obnovte výchozí tovární nastavení monitoru. • Prostřednictvím nabídky OSD upravte nastavení jasu a kontrastu. Záležitosti týkající se bezpečnosti Viditelné známky kouře nebo jiskření Občasné potíže Bez barvy Chybná barva Ulpívání statického obrazu ponechaného příliš dlouho na monitoru • Neprovádějte žádné kroky pro odstranění problémů. • Ihned kontaktujte společnost Dell.
Specifické příznaky Zjištěné projevy Nelze upravovat Na obrazovce nastavení se nezobrazí monitoru OSD pomocí tlačítek na předním panelu Žádný vstupní signál při stisknutí libovolného ovládacího prvku Žádný obraz, indikátor svítí bíle. Obraz nevyplňuje celou obrazovku. Možná řešení • Vypněte monitor, odpojte a znovu připojte napájecí kabel a zapněte monitor. • Zkontrolujte, zda není nabídka OSD zamčena. Pokud je zamčena, odemkněte ji stiskem a přidržením tlačítka nad vypínačem na 6 s. Viz zámek nabídky.
Příloha Bezpečnostní pokyny V případě monitorů s lesklým rámečkem je třeba dobře zvážit umístění monitoru, protože se od rámečku může odrážet okolní světlo a lesklé povrchy a způsobovat rušení. VAROVÁNÍ: Používání ovládacích prvků, provádění změn nastavení nebo postupů jiným způsobem, než jak je určeno v této dokumentaci, může způsobit úrazy vysokým napětím, elektrickým proudem nebo mechanickými vlivy. Bezpečnostní pokyny viz Informace o bezpečnosti, prostředí a předpisech (SERI).
3 Klepněte na položku Kontakt vedle rozevíracího seznamu zemí. 4 Vyberte příslušný odkaz na servis nebo podporu dle vašich potřeb. 5 Vyberte metodu kontaktu na Dell, která vám vyhovuje. Sestavení monitoru Nastavení rozlišení obrazovky 2560 x 1440 (maximální) Pro dosažení optimálního výsledku nastavte rozlišení zobrazení na 2560 x 1440 obrazových bodů podle následujících kroků: Ve Windows Vista, Windows 7, Windows 8 nebo Windows 8.1: 1 Pouze v případě operačního systému Windows 8 nebo Windows 8.
4 Klepněte na Upřesnit Nastavení. 5 Určete dodavatele vaší grafické karty podle popisu v horní části okna (například NVIDIA, ATI, Intel atd.). 6 Vyhledejte aktualizovaný ovladač na webových stránkách výrobce grafické karty (například http://www.ATI.com NEBO http://www.NVIDIA.com). 7 Po nainstalování ovladačů pro vaši grafickou kartu zkuste znovu nastavit rozlišení 2560 x 1440. Ve Windows 10: 1 Klikněte pravým tlačítkem na plochu a vyberte volbu nastavení zobrazení.