Dell UltraSharp 27 4K PremierColor Monitor—UP2720Q Benutzerhandbuch Modell: UP2720Q Behördliche Modellnummer: UP2720Qb
Hinweise, Vorsichtsmaßregeln und Warnungen HINWEIS: EIN HINWEIS beschreibt wichtige Informationen, damit Sie Ihren Computer besser nutzen können. VORSICHT: EINE VORSICHTSMASSREGEL führt zu potentiellen Schäden an der Hardware oder dem Verlust von Daten, wenn die Anweisungen nicht befolgt werden. ACHTUNG: EINE ACHTUNG beschreibt die Möglichkeit von Eigentumsschäden, Verletzungen oder Tod. Copyright © 2019 Dell Inc. Alle Rechte vorbehalten.
Inhalt Über Ihren Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Lieferumfang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Produktmerkmale. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Komponenten und Bedienelemente . . . . . . . . . . . . . . . . . 10 Vorderansicht . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Ansicht von hinten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monitor einrichten . . . . . . . . . . . . . . . . . . . . . . . . . 29 Ständer anbringen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Anbringen der Monitorblende . . . . . . . . . . . . . . . . . . . . . 32 Monitor anschließen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 HDMI-Kabel anschließen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 DisplayPort-Kabel (DP-zu-DP) anschließen . . . . . . . . . . . . . . . . .
Den Überprüfungsvorgang stoppen . . . . . . . . . . . . . . . . . 74 Kippen, Schwenken und Höhenverstellung . . . . . . . . . . . 75 Kippen, Schwenken. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Höhenverstellung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Monitor drehen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Problemlösung . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Selbsttest . . . . . .
Über Ihren Monitor Lieferumfang Der Monitor wird mit den unten gezeigten Artikeln geliefert. Stellen Sie sicher, dass Sie sämtliche Komponenten erhalten haben und Kontakt zu Dell, wenn etwas fehlt. HINWEIS: Einige Artikel könnten optional sein und nicht mit dem Monitor geliefert werden. Einige Funktionen oder Medien könnten in einigen Ländern nicht verfügbar sein. HINWEIS: Zum Einrichten mit einem anderen Ständer, lesen Sie bitte die Anleitung des entsprechenden Ständers.
Sockel Monitorblende Netzkabel (Je nach Land verschieden) HDMI-Kabel DP-Kabel (DP-zu-DP) Thunderbolt™ 3 (USB Type-C) Aktiv-Kabel Über Ihren Monitor │ 7
USB Type-C auf Type-A Kabel • Werkskalibrierungsbericht • Kalibrierung und Validierung Technisches Datenblatt • Kurzanleitung • Sicherheit, Umweltschutz und Bestimmungen 8 │ Über Ihren Monitor
Produktmerkmale Der Dell UP2720Q Flachbildschirm arbeitet mit Active Matrix-, Dünnschichttransistor- (TFT) und Flüssigkristall-Technologien (LCD) und einer LED-Beleuchtung. Die Monitorfunktionen umfassen: • 68,47 cm (27 Zoll) sichtbarer Anzeigebereich (diagonal gemessen). 3840 x 2160 (16:9) Bildpunkte Auflösung, zusätzlich Vollbildanzeige in niedrigeren Auflösungen. • Weitwinkelanzeige für die Anzeige aus einer sitzenden oder stehenden Position.
Komponenten und Bedienelemente Vorderansicht Bedienelemente an der Vorderseite Bezeichnung Beschreibung 1 Funktionstasten (Weitere Informationen finden Sie unter Monitor bedienen) 2 Ein/Aus-Taste (mit LED-Anzeige) 10 │ Über Ihren Monitor
Ansicht von hinten Rückansicht ohne und mit Monitorständer Bezeichnung Beschreibung Verwenden 1 VESA-Montagebohrungen (100 mm x 100 mm- Hinter der angebrachten VESAAbdeckung) Monitor-Wandbefestigung per VESA-kompatibler Wandmontagehalterung (100 mm x 100 mm). 2 Etikett mit behördlichen Bestimmungen Liste der behördlichen Zulassungen. 3 Stand Entriegelungstaste Löst den Ständer vom Monitor.
Ansicht von unten Ansicht von unten ohne Monitor-Standfuß Bezeichnung Beschreibung Verwenden 1 Netzkabelanschluss Schließen Sie das Netzkabel an (im Lieferumfang des Monitors enthalten). 2 Schlitz für Sicherheitsschloss Sichert den Monitor mit Schloss (nicht im Lieferumfang enthalten). HDMI Port Anschluss Schließen Sie Ihren Computer mit einem HDMI-Kabel an. 4 DisplayPortEingangsanschluss Schließen Sie Ihren Computer mit einem DPKabel an.
6-1 Thunderbolt™ 3 Schließen Sie das Thunderbolt™ 3 AktivUpstream Kabel, das mit Ihrem Monitor geliefert wurde, (USB Type-C) Port an den Computer oder das Mobilgerät an. Dieser Port unterstützt USB Stromübertragung (bis zu 90 W), Daten und DisplayPort Videosignal. Der Thunderbolt™ 3 Port unterstützt Wechselmodus DP1.4 mit einer maximalen Auflösung von 3840 x 2160 bei 60 Hz, PD 20 V/4,5 A, 15 V/3 A, 9 V/3 A, und 5 V/3 A. Thunderbolt™ 3 unterstützt MST (MultiStream Transport) fähige Monitore.
HINWEIS: Thunderbolt™ 3 wird von Windows Versionen vor Windows 10 nicht unterstützt. 7 (1, 2) USB 3.2 Gen2 Downstream Port Hier schließen Sie Ihre USB-Geräte an. Diesen Anschluss können Sie erst verwenden, nachdem Sie das USB-Kabel an den Computer angeschlossen haben.** 7-3 USB 3.2 Gen1 Zum Aufladen Ihres Gerätes. Downstream-Port mit Aufladefunktion 7-4 USB 3.2 Gen1 Downstream Port Hier schließen Sie Ihre USB-Geräte an.
Technische Daten des Monitors Flachbildschirm – technische Daten Modell UP2720Q Bildschirmtyp Aktiv-Matrix-TFT-LCD Panel-Technologie In Plane Switching Typ Längen-/ Seitenverhältnis 16:9 Sichtbares Bild Diagonale 68,47 mm (27 Zoll) Horizontal, Aktiver Bereich 596,74 mm (23,49 Zoll) Vertikal, Aktiver Bereich 335,66 mm (13,21 Zoll) Bereich 200301 mm2 (310,47 Zoll 2) Pixelabstand 0,1554 mm x 0,1554 mm Pixel pro Zoll 163 Betrachtungswinkel 178° (vertikal) typisch 178° (horizontal) typisch
Konnektivität • 1 x DP 1.4 (HDCP 2.2) • 2 x HDMI 2.0 (HDCP 2.2) • 1 x Thunderbolt™ 3 Upstream Port (DP1.4) • 1 x Thunderbolt™ 3 Downstream Port (DP1.4) • 2 x USB 3.2 Gen2 Downstream Port • 2 x USB 3.2 Gen1 Downstream Port (1 x BC1.
Unterstützte Videomodi Modell UP2720Q Videoanzeigefähigkeiten 480p, 576p, 720p, 1080i, 1080p, QHD, UHD, (Interlacing (HDMI-Wiedergabe) Modus wird im PBP Modus nicht unterstützt) Voreingestellte Anzeigemodi Anzeigemodus Horizontal Vertikale frequenz Frequenz (kHz) (Hz) Pixeltakt (MHz) Sync-Polarität (horizontal/ vertikal) VESA, 640 x 480 31,5 59,9 25,2 -/- VESA, 640 x 480 37,5 75,0 31,5 -/- VESA, 720 x 400 31,5 70,1 28,3 -/+ VESA, 800 x 600 37,9 60,3 40,0 +/+ VESA, 800 x 600 46,9
* Erfordert eine Grafikkarte, die DP unterstützt. ** Erfordert eine Grafikkarte, die HDMI 2.0 unterstützt. Multi-Stream Transport (MST) Modi MST Quellmonitor Maximale Anzahl von unterstützten Monitoren 3840 x 2160 bei 60 Hz 3840 x 2160 bei 60 Hz 1 HINWEIS: Verwenden Sie die mit Ihrem Monitor mitgelieferten Kabel für die Thunderbolt™ Multi-Stream Transport (MST) Verbindung. Siehe Anschluss des Monitors für Thunderbolt™ Multi-Stream Transport (MST) Funktion für Einzelheiten zu den Anschlüssen.
Physische Eigenschaften Modell UP2720Q Steckertyp • 1 x DP 1.4 • 2 x HDMI 2.0 • 1 x Thunderbolt™ 3 Upstream (DP1.4) • 1 x Thunderbolt™ 3 Downstream (DP1.4) • 2 x USB 3.2 Gen2 Downstream Ports • 2 x USB 3.2 Gen1 Downstream Ports (1 x BC1.
Physische Eigenschaften (Fortsetzung) Ständerabmessungen Höhe (verlängert) 456,3 mm (17,96 Zoll) Höhe (zusammengeschoben) 408,9 mm (16,10 Zoll) Breite 260,0 mm (10,24 Zoll) Tiefe 212,0 mm (8,35 Zoll) Gewicht Gewicht mit Verpackung 14,14 kg (31,17 lb) Gewicht mit montiertem Ständer und Kabeln 9,71 kg (21,41 lb) Gewicht ohne montierten Ständer 5,55 kg (12,24 lb) (zur Wand- oder VESA-Befestigung ohne Kabel) Gewicht des Ständers 3,64 kg (8,02 lb) Glänzender Vorderrahmen 2-4 Umgebungsbedingungen
Umgebungsbedingungen (Fortsetzung) Meereshöhe Im Betrieb 3.048 m (10.000 ft) (max.) Ausgeschaltet 12.192 m (40.000 ft) (max.) Wärmeableitung • 784,76 BTU/Stunde (max.) • 150,13 BTU/Stunde (typisch) Energieverwaltungsmodi Sofern Sie eine VESA DPM™-kompatible Grafikkarte oder Software in Ihrem PC installiert haben, kann der Monitor seinen Energieverbrauch automatisch verringern, wenn er nicht verwendet wird. Dies wird als Energiesparmodus* bezeichnet.
Dieses Dokument dient lediglich Informationszwecken und gibt die Laborleistung wieder. Ihr Produkt kann je nach den von Ihnen bestellten Softwareprogrammen, Komponenten und Peripheriegeräten andere Werte aufweisen und wir verpflichten uns nicht, solche Informationen zu aktualisieren. Daher sollte der Kunde bei Entscheidungen bezüglich elektrischer Toleranzen oder anderweitig nicht auf diese Informationen vertrauen.
Pinbelegung DisplayPort-Anschluss Pin Nummer Seite mit 20 Stiften des angeschlossenen Signalkabels 1 ML3 (n) 2 GND 3 ML3 (p) 4 ML2 (n) 5 GND 6 ML2 (p) 7 ML1 (n) 8 GND 9 ML1 (p) 10 ML0 (n) 11 GND 12 ML0 (p) 13 GND 14 GND 15 AUX (p) 16 GND 17 AUX (n) 18 Hot-Plug-Erkennung 19 Re-PWR 20 +3,3 V DP_PWR Über Ihren Monitor │ 23
HDMI-Anschluss Pin Nummer Seite mit 19 Stiften des angeschlossenen Signalkabels 1 TMDS DATA 2+ 2 TMDS DATA 2, Abschirmung 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 TMDS DATA 1, Abschirmung 6 TMDS DATA 1- 7 TMDS DATA 0+ 8 TMDS DATA 0, Abschirmung 9 TMDS DATA 0- 10 TMDS CLOCK+ 11 TMDS CLOCK, Abschirmung 12 TMDS CLOCK- 13 CEC 14 Reserviert (am Gerät nicht angeschlossen) 15 DDC CLOCK (SCL) 16 DDC DATA (SDA) 17 DDC/CEC-Masse 18 +5 V-Stromversorgung 19 HOT-PLUG-ERKENNUNG 24 │ Über I
Plug & Play-Unterstützung Sie können den Monitor in jedem Plug-and-Play-kompatiblen System installieren. Der Monitor stellt dem Computersystem automatisch eigene EDID-Daten (Extended Display Identification Data) über DDC-Protokolle (Display Data Channel) zur Verfügung, so dass sich das System selbst konfigurieren und die Monitoreinstellungen optimieren kann. Die meisten Monitor-Installationen laufen automatisch ab; auf Wunsch können Sie unterschiedliche Einstellungen wählen.
HINWEIS: Um den USB Type-C Wechselmodus zu unterstützen, stellen Sie bitte sicher, dass der Quellcomputer über die Wechselmodus Funktion verfügt.
A7 D- B7 D- A8 SBU1 B8 SBU2 A9 VBUS B9 VBUS A10 RX2- B10 RX1- A11 RX2+ B11 RX1+ A12 GND B12 GND USB-Ports • 1 x Thunderbolt™ 3 Downstream (USB Type-C kompatibel) - unten • 1 x Thunderbolt™ 3 Upstream (USB Type-C kompatibel) - unten • 2 x USB 3.2 Gen2 Downstream - unten • 2 x USB 3.2 Gen1 Downstream - unten • Ladeanschluss- der Anschluss mit dem Batteriesymbol; unterstützt Schnellladung, wenn das Gerät BC1.2-kompatibel ist. HINWEIS: Zur vollen Ausschöpfung der USB 3.
Hinweise zur Wartung Monitor reinigen VORSICHT: Lesen und befolgen Sie die Sicherheitshinweise, bevor Sie den Monitor reinigen. ACHTUNG: Trennen Sie das Monitornetzkabel von der Stromversorgung, bevor Sie den Monitor reinigen. Beim Auspacken, Reinigen und beim allgemeinen Umgang mit dem Monitor halten Sie sich am besten an die nachstehenden Hinweise: • Befeuchten Sie zur Reinigung Ihres antistatischen Monitors ein weiches, sauberes Tuch leicht mit Wasser.
Monitor einrichten Ständer anbringen HINWEIS: Bei der Auslieferung ab Werk ist der Ständer noch nicht angebracht. HINWEIS: Dies ist für einen Monitor mit einem Ständer anwendbar. Wenn andere stehen gekauft wird, entnehmen Sie bitte dem jeweiligen Ständer Setup-Anleitung für Einrichtung Anweisungen. VORSICHT: Nehmen Sie den Monitor nicht aus dem Karton, bevor Sie den Ständer angebracht haben. So bringen Sie den Ständer an: 1.
5. Heben Sie die Abdeckung wie gezeigt hoch, um den VESA Bereich für das Zusammensetzen des Ständers freizulegen. 6. Befestigen Sie den Ständer am Monitor. a. Passen Sie die Vertiefung an der Rückseite des Monitors in die beiden Nasen am Oberteil des Ständers ein. b. Drücken Sie den Ständer an, bis er einrastet.
7. Stellen Sie den Monitor aufrecht. HINWEIS: Heben Sie den Monitor vorsichtig an, um ein Abrutschen oder Herunterfallen zu vermeiden. VORSICHT: Halten oder heben Sie den Monitor nicht am Farbmessgerät an, wenn Sie den Monitor bewegen. 8. Entfernen Sie die Abdeckung vom Monitor.
Anbringen der Monitorblende So installieren Sie die Monitorblende: 1. Nehmen Sie die Blende heraus, die mit dem Monitor geliefert wurde. 2. Falten Sie die Blende mit den "U" Kanalstreifen an beiden Klappen nach innen.
3. Richten Sie die Monitorseite innerhalb der "U" Kanalstreifen aus. 4. Schieben Sie die Blende ganz nach unten. Monitor anschließen ACHTUNG: Bevor Sie die in diesem Abschnitt beschriebenen Schritte ausführen, lesen und befolgen Sie bitte die Sicherheitshinweise. HINWEIS: Schließen Sie nicht alle Kabel gleichzeitig an den Computer an. So schließen Sie Ihren Monitor an einen Computer an: 1. Schalten Sie den Computer aus, trennen Sie das Netzkabel. 2.
HDMI-Kabel anschließen HINWEIS: Die werkseitige Standardeinstellung auf dem UP2720Q ist HDMI 2.0. Wenn der Monitor nach dem Anschluss des HDMI-Kabels keine Inhalte anzeigt, folgen Sie den unten stehenden Schritten, um die Einstellungen von HDMI 2.0 auf HDMI 1.4 zu ändern: • Drücken Sie auf die zweite Taste neben der aufzurufen.
DisplayPort-Kabel (DP-zu-DP) anschließen HINWEIS: Die werkseitige Standardeinstellung auf dem UP2720Q ist DP 1.4. Anschluss des Thunderbolt™ 3 Aktiv-Kabels HINWEIS: Verwenden Sie nur das mit dem Monitor gelieferte Thunderbolt™ 3 Aktiv-Kabel. • • • • Dieser Anschluss unterstützt DisplayPort Wechselmodus DP1.4. Der kompatible Thunderbolt™ 3 Anschluss für die Stromversorgung (PD Version 3.0) bietet bis zu 90 W Leistung.
Anschluss des Monitors für Thunderbolt™ Multi-Stream Transport (MST) Funktion HINWEIS: Der UP2720Q unterstützt die Thunderbolt™ MST Funktion. Um diese Funktion nutzen zu können, muss Ihr PC die Thunderbolt™ Funktion unterstützen. Die werkseitige Standardeinstellung auf dem UP2720Q ist Wechselmodus DP1.4. Um eine MST-Verbindung herzustellen, verwenden Sie bitte nur das mit Ihrem Monitor mitgelieferte Thunderbolt™ 3 Aktiv-Kabel und führen Sie die folgenden Schritte aus: 1.
HINWEIS: Verwenden Sie das Thunderbolt™ 3 Aktiv-Kabel, das im Lieferumfang des Monitors enthalten ist. HINWEIS: Wenn Sie einen Computer mit USB-C DP-Anschluss verwenden, erwerben Sie bitte das USB-C DP-Kabel separat. Weitere Informationen finden Sie unter: http://www.dell.com. HINWEIS: Informationen zum Kauf eines Thunderbolt™ 3 Passiv-Kabels finden Sie unter: Kauf eines Thunderbolt™ 3 Passiv-Kabels.
5. Schalten Sie Monitor und Computer ein. Falls Ihr Monitor ein Bild anzeigt, ist die Installation abgeschlossen. Falls kein Bild angezeigt wird, lesen Sie bitte unter Universal Serial Bus (USB) spezifische Probleme. 6. Zur Kabelführung nutzen Sie den Kabelhalter am Monitorfuß. HINWEIS: Die USB-Verbindung bietet in diesem Szenario nur USBDatenübertragung. VORSICHT: Die Abbildungen in dieser Anleitung dienen lediglich der Veranschaulichung. Das tatsächliche Aussehen kann etwas abweichen.
Monitorständer abnehmen HINWEIS: Damit der gebogene LCD-Bildschirm beim Abnehmen des Ständers nicht verkratzt und beschädigt wird, achten Sie darauf, dass der Monitor auf einem weichen, sauberen Schaumstoff gestellt wird. Der direkte Kontakt mit harten Gegenständen könnte zu Schäden am gebogenen Monitor führen. HINWEIS: Dies ist für einen Monitor mit einem Ständer anwendbar. Wenn andere stehen gekauft wird, entnehmen Sie bitte dem jeweiligen Ständer Setup-Anleitung für Einrichtung Anweisungen.
Wandbefestigung (optional) (Schraubenabmessung: M4 x 10 mm). Lesen Sie die mit der VESA-kompatiblen Montageausrüstung für die Wand gelieferte Anleitung. 1. Legen Sie den Monitor auf ein weiches Tuch oder Kissen auf einem stabilen, ebenen Arbeitstisch. 2. Den Ständer entfernen. 3. Die vier Schrauben, mit denen die Plastikabdeckung befestigt wird, mit einem Kreuzschlitzschraubenzieher entfernen. 4. Den Befestigungsbügel der Wandmontageausrüstung am Monitor befestigen. 5. Den Monitor an die Wand montieren.
Monitor bedienen Monitor einschalten Drücken Sie auf die -Taste, um den Monitor einzuschalten. Bedienfeldtasten verwenden Mit den Steuerungstasten an der Vorderseite des Monitors können Sie Einstellungen anpassen. Die folgende Tabelle beschreibt die Tasten an der Vorderseite: Bedienfeldtaste Beschreibung Wählen Sie diese Taste zur Auswahl aus einer Liste voreingestellter Farbmodi. 1 Schnellzugriffstasten/ Voreingestellte Modi Verwenden Sie diese Taste, um die Eingangsquelle auszuwählen.
Verwenden Sie diese Taste, um die Farbkalibrierung zu starten. 3 Schnellzugriffstaste/ Jetzt kalibrieren Verwenden Sie diese Taste, um die aktuellen Einstellungen des Monitors anzuzeigen. 4 Schnellzugriffstaste/ Info Anzeigen 5 Menü 6 Verwenden Sie die MENÜ Taste, um die Bildschirmanzeige (OSD) aufzurufen. Siehe Zugriff aufs Menüsystem. Verwenden Sie diese Taste, um das OSDHauptmenü zu verlassen. Beenden Verwenden Sie die Ein/Aus-Taste, um den Monitor Ein und Aus zu schalten.
Bedienfeldtaste Mit den Tasten an der Vorderseite des Monitors können Sie die Bildeinstellungen anpassen. Bedienfeldtaste 1, 2 Keine Funktion 3 Beschreibung Diese Tasten haben keine Funktionen. Mit der Nach-oben Taste stellen Sie Elemente im OSDMenü ein (erhöhen Werte). Nach-oben 4 Mit der Nach-unten Taste stellen Sie Elemente im OSDMenü ein (vermindern Werte). Nach-unten Verwenden Sie die Enter Taste, um ein Untermenü aufzurufen.
Anwendung der Anzeige auf dem Bildschirm (OSD-Menü) Zugriff aufs Menüsystem HINWEIS: Falls Sie die Einstellungen abändern und danach entweder zu einem anderen Menü gehen oder das OSD-Menü verlassen werden diese Änderungen automatisch im Monitor abgespeichert. Die Abänderungen werden ebenfalls abgespeichert, falls Sie die Einstellungen abändern und danach warten, bis das OSD-Menü ausgeblendet wird. 1. Drücken Sie auf die Taste, um das OSD-Menü zu starten und um das Hauptmenü anzuzeigen. 2.
Symbol Menü und Untermenüs Farbe Farbraum Beschreibung Mit Farbe stellen Sie den Farbeneinstell-Modus ein. Wenn Sie Farbraum auswählen, können Sie einen der folgenden auswählen: DCI P3 D65 G2.4 L100, BT.709 D65 BT1886 L100, BT.2020 D65 BT1886 L100, sRGB D65 sRGB L250, Adobe RGB D65 G2.2 L250, Adobe RGB D50 G2.2 L250, Nativ, Benutzer 1, Benutzer 2, Benutzer 3, CAL 1 oder CAL 2. HINWEIS: Der werkseitig voreingestellte Modus DCI P3 D65 G2.
Farbe zurücks. Leuchtkraft Setzt die Farbeinstellungen des Monitors auf die werkseitigen Voreinstellungen zurück. Mit Leuchtkraft wird die Leuchtstärke der Hintergrundbeleuchtung eingestellt. Drücken Sie auf die Taste, um die Leuchtkraft zu erhöhen und auf die verringern (min. 45 / max. 250). Taste, um die Leuchtkraft zu HINWEIS: Leuchtkraft ist ausgegraut, wenn Farbraum auf CAL 1 oder CAL 2 eingestellt ist.
EingabeQuelle Verwenden Sie das Eingabe-Quelle Menü, um zwischen verschiedenen Videosignalen auszuwählen, die eventuell an Ihrem Monitor angeschlossen sind. Thunderbolt Wählen Sie den Thunderbolt Eingang, wenn Sie einen Thunderbolt™ 3 Anschluss nutzen. Drücken Sie auf die Taste, um die Thunderbolt Eingangsquelle auszuwählen. DP Wählen Sie den DP Eingang, wenn Sie einen DisplayPort (DP) Anschluss nutzen. Drücken Sie auf die HDMI 1 Taste, um die DP Eingangsquelle auszuwählen.
Auto-Auswahl Ermöglicht Ihnen die Einstellung von Auto-Auswahl für für Thunderbolt für: Thunderbolt • Abfrage für mehr. Eingänge: Zeigt immer die "Zu Thunderbolt-Videoeingang wechseln" Meldung anzeigen, damit Sie auswählen können, ob Sie wechseln möchten oder nicht. • Ja: Wechselt immer zum Thunderbolt Videoeingang (ohne Nachfrage), wenn das Thunderbolt™ 3 Aktiv-Kabel angeschlossen wird.
Digitalkino Maske Marker Passt die Digitalkino Maske auf Gesamter DCI Container, DCI 1,85:1, DCI 2,39:1 oder DCI 2,35:1 an. Passt die Marker auf Keine Marker, 1,85:1, 2,39:1, 2,35:1, 2:1, 1:1, 16:9 Extraktion, 16:9 Aktion Sicher, 16:9 Titel Sicher, 4:3 Extraktion, 4:3 Aktion Sicher, 4:3 Titel Sicher, Fadenkreuz Mitte oder Drittel an. Markerfarbe Passt die Markerfarbe auf Grau, Rot, Grün oder Blau an. Videodatenbe- Passt Videodatenbereich einstellen auf Auto, Voll reich oder Limitiert an.
Gleichmäßigk. Wählen Sie Kompensationseinstellungen für die komp. Bildschirmgleichmäßigkeit aus. Auf ist werkseitig voreingestellt. Gleichmäßigk.komp. passt verschiedene Bildschirmbereiche auf die Mitte bezogen an, um eine gleichmäßige Helligkeit und Farbe über den gesamten Bildschirm hinweg zu erzielen. HINWEIS: Anwendern wird empfohlen, die Standard Luminanzeinstellung zu verwenden, wenn Gleichmäßigk.komp. aktiviert ist.
PBP-Modus Passt den PBP (Bild-neben-Bild) Modus auf AA, AB oder Aus an. Drücken Sie auf die aktivieren.
PBP (Sub) Wählen Sie aus den verschiedenen Videosignalen aus, die an Ihren Monitor für das PBP Subfenster angeschlossen werden können. Drücken Sie auf die Taste, um das PBP Subfenster Quellsignal auszuwählen. Wählen Sie aus, zwischen den Eingangsquellen im PBP PBP EingangsquelModus umzuschalten. Drücken Sie die Taste, um lenumschaltu zwischen den zwischen den Eingangsquellen im PBP ng Modus umzuschalten. HINWEIS: Nicht verfügbar, wenn der PBP Modus auf AA eingestellt ist.
Video tauschen Auswahl des Videowechsels zwischen Hauptfenster Farbraum (Sub) Passt Farbraum (Sub) auf DCI P3, BT.709, BT.2020, sRGB, Adobe RGB oder Nativ an. Weißpunkt (Sub) Passt Weißpunkt (Sub) auf D50, D55, D60, D65, DCI P3 oder Nativ an. und Subfenster im PBP Modus. Drücken Sie auf die Taste, um zwischen dem Hauptfenster und Subfenster zu wechseln. HINWEIS: Nicht verfügbar, wenn Farbraum (Sub) auf Nativ eingestellt ist. Gamma (Sub) Passt Gamma (Sub) auf 1,6, 1,8, 2,0, 2,2, 2,4, 2,6, BT.
Kalibrierung Führt die Farbkalibrierung mit dem integrierten Farbmessgerät durch. Jetzt kalibrieren Ermöglicht es Ihnen, die Farbkalibrierung zu starten. Kalibrierungs- Ermöglicht Ihnen die Einstellung des Kalibrierungsziels ziel auf DCI P3 D65 G2.4 L100, BT.709 D65 BT1886 L100, BT.2020 D65 BT1886 L100, sRGB D65 sRGB L250, Adobe RGB D65 G2.2 L250, Adobe RGB D50 G2.2 L250, CAL 1 oder CAL 2.
Basiertes Hier können Sie Basiertes Kolorimeterprofil auf Kolorimeter- Integriert oder Externes Farbmessgerät profil (korreliertes externes Farbmessgerät) einstellen. Ein Wechsel des Profils kann zu inkonsistenten Ergebnissen der vorherigen Kalibrierung führen. Es wird empfohlen, den Monitor nach dem Profilwechsel neu zu kalibrieren. HINWEIS: Der Benutzer kann verschiedene Kalibratorprofile anwenden.
Überprüfung Führt die Überprüfung der Farbkalibrierung mit dem integrierten Farbmessgerät durch. Jetzt überprüfen Überprüfungsziel Ermöglicht es Ihnen, die Farbüberprüfung zu starten. Ermöglicht Ihnen die Einstellung des Überprüfungsziels auf DCI P3 D65 G2.4 L100, BT.709 D65 BT1886 L100, BT.2020 D65 BT1886 L100, sRGB D65 sRGB L250, Adobe RGB D65 G2.2 L250, Adobe RGB D50 G2.2 L250, CAL 1 oder CAL 2. Autom. Reka- Hier können Sie Autom. Rekalibrierung bei ΔE > 2 librierung bei auf Ja oder Nein.
Zeitplan Sitzungen planen Stellt den Zeitplan für die automatische Kalibrierung oder Überprüfung ein. Hier können Sie den Zeitplaner auf Aus, Kalibrierung, Überprüfung oder Kalibrierung + Überprüfung einstellen. Hier können Sie Sitzungen planen auf Alle 200 Stunden oder auf benutzerdefinierte Intervalle (Vierteljährlich, Monatlich, Wöchentlich oder Täglich) einstellen.
Menü Sprache Diese Option auswählen, um die Einstellungen der OSD, wie z. B. Sprache der OSD, die Zeitdauer der Anzeige des Menüs auf dem Bildschirm usw., vorzunehmen. Die Sprachen-Optionen zum Einstellen der OSDAnzeige auf eine der acht verfügbaren Sprachen sind Englisch, Spanisch, Französisch, Deutsch, Brasilianisches Portugiesisch, Russisch, vereinfachtes Chinesisch oder Japanisch. Auto-Drehung Hier können Sie die Auto-Drehung Auf oder Aus stellen.
Sperren Wenn die Steuertasten am Monitor gesperrt sind, können Sie verhindern, dass Personen auf die Bedienelemente zugreifen. Es verhindert auch eine versehentliche Aktivierung bei mehreren Monitoren nebeneinander. • Menü-Tasten: Alle Menü-/Funktionstasten (außer der Ein-/Austaste) sind gesperrt und für den Benutzer nicht zugänglich. • Ein-/Austaste: Nur die Ein-/Austaste ist gesperrt und für den Benutzer nicht zugänglich.
Menü zurücks. Zum Rücksetzen aller OSD-Einstellungen auf die werkseitig voreingestellten Werte.
Automatischer Ermöglicht es Ihnen, den Monitor vollständig Ruhemodus ausschalten zu lassen oder das Bedienfeld nur auszuschalten, wenn Ihr Computer in den Ruhemodus wechselt.
Datum und Uhrzeit einstellen Stellt das Datum und die Uhrzeit für den Monitor ein. DDC/CI DDC/CI (Anzeigedatenkanal/KommandoSchnittstelle) ermöglicht die Einstellbarkeit der Parametern Ihres Monitors (Helligkeit, Farbausgleich usw.) über die Software in Ihrem Computer. Diese Funktion kann durch Auswählen von Aus deaktiviert werden. Aktivieren Sie diese Funktion für die besten Resultate sowie für die optimale Leistung Ihres Monitors.
LCDZum Reduzieren von geringen Bildverzerrungen. Die Konditionie- Zeitdauer, die das Programm zum Durchführen rung benötigt, hängt vom Grad der Bildaufbewahrung ab. Diese Funktion kann durch Auswählen von Auf aktiviert werden. Firmware Servicemarkierung Sonstige zurücks. Zeigt die Firmwareversion des Monitors an. Zeigt die Servicemarkierung Seriennummer des Monitors an. Setzen Sie im Menü Weiteres sämtliche Einstellungen auf die Standardwerte zurück.
OSD-Warnmeldungen Wenn der Monitor eine bestimmte Auflösung nicht unterstützt, wird die folgende Meldung angezeigt: HINWEIS: Die Meldung könnte je nach angeschlossenem Eingangssignal leicht unterschiedlich sein. Das bedeutet, dass sich der Monitor nicht richtig auf das Signal einstellen kann, das er vom Computer empfängt. In den Technische Daten des Monitors finden Sie die von Ihrem Monitor unterstützten Horizontal- und Vertikalfrequenzen. Die empfohlene Auflösung beträgt 3840 x 2160.
HINWEIS: Die Meldung könnte je nach ausgewählten Einstellungen leicht unterschiedlich sein. Die folgende Meldung erscheint, wenn der Monitor in den Energiesparmodus wechselt: Durch Aktivieren des Computers und "Aufwecken" des Monitors erhalten Sie wieder Zugriff auf das OSD. HINWEIS: Die Meldung könnte je nach angeschlossenem Eingangssignal leicht unterschiedlich sein.
HINWEIS: Die Meldung könnte je nach angeschlossenem Eingangssignal leicht unterschiedlich sein.
Maximale Auflösung einstellen So stellen Sie die maximale Monitorauflösung ein: Unter Windows® 7, Windows® 8 und Windows® 8.1: 1. Wählen Sie unter Windows® 8 und Windows® 8.1 die Desktop Kachel zum Wechsel auf den klassischen Desktop. 2. Klicken Sie mit der rechten Maustaste auf den Desktop und klicken Sie auf Bildschirmauflösung. 3. Klicken Sie in der Dropdownliste auf die Bildschirmauflösung und wählen Sie 3840 x 2160 aus. 4. Klicken Sie auf OK. Unter Windows® 10: 1.
Farbkalibrierung durchführen Führen Sie eine Kalibrierung mit dem integrierten Farbmessgerät durch, um die Farbe Ihres Monitors zu kalibrieren. Das OSD-Menü verwenden 1. Verwenden Sie das OSD-Menü, um die Kalibrierungskriterien gemäß Ihren Präferenzen einzustellen. Wählen Sie anschließend Jetzt kalibrieren. 2. Wenn die folgende Meldung angezeigt wird, wählen Sie Ja, um den Vorgang zu wiederholen.
3. Die Kalibrierung wird automatisch starten. Die Direkttaste mit Videosignal verwenden 1. Drücken Sie eine der Funktionstasten, um die Direkttasten anzuzeigen. 2. Drücken Sie auf die Taste. 3. Wenn die folgende Meldung angezeigt wird, wählen Sie Ja, um den Vorgang zu wiederholen.
4. Die Kalibrierung wird automatisch starten. Die Direkttaste ohne Videosignal verwenden Sie können die Kalibrierung für den Monitor durchführen, ohne ein Eingangssignal vom Computer zu erfassen. 1. Drücken Sie eine der Funktionstasten, um die Direkttasten anzuzeigen. 2. Drücken Sie auf die 70 │ Monitor bedienen Taste.
3. Die Kalibrierung wird automatisch starten. HINWEIS: Eine Kalibrierung im Porträtmodus wird nicht empfohlen. HINWEIS: Detaillierte Informationen zur Funktionalität finden Sie unter Kalibrierung. Den Kalibrierungsvorgang stoppen Sie können den Kalibrierungsvorgang jederzeit stoppen. 1. Drücken Sie während des Kalibrierungsvorgangs eine der Funktionstasten bis die folgende Meldung erscheint. 2. Wählen Sie Ja, um den Vorgang zu stoppen.
Farbüberprüfung durchführen Führt die Überprüfung der Farbkalibrierung mit dem integrierten Farbmessgerät durch. Das OSD-Menü verwenden 1. Verwenden Sie das OSD-Menü, um die Überprüfungskriterien gemäß Ihren Präferenzen einzustellen. Wählen Sie anschließend Jetzt überprüfen, um den Überprüfungsprozess zu starten. 2. Wenn die folgende Meldung angezeigt wird, wählen Sie Ja, um den Vorgang zu wiederholen.
3. Die Überprüfung wird automatisch starten. Die Direkttaste ohne Videosignal verwenden Sie können die Überprüfung für den Monitor durchführen, ohne ein Eingangssignal vom Computer zu erfassen. 1. Drücken Sie eine der Funktionstasten, um die Direkttasten anzuzeigen. 2. Drücken Sie auf die Taste.
3. Wenn die folgende Meldung angezeigt wird, wählen Sie Ja, um den Vorgang zu wiederholen. HINWEIS: Eine Überprüfung im Porträtmodus wird nicht empfohlen. HINWEIS: Detaillierte Informationen zur Funktionalität finden Sie unter Überprüfung. Den Überprüfungsvorgang stoppen Sie können den Überprüfungsvorgang jederzeit stoppen. 1. Drücken Sie während des Überprüfungsvorgangs eine der Funktionstasten bis die folgende Meldung erscheint. 2. Wählen Sie Ja, um den Vorgang zu stoppen.
Kippen, Schwenken und Höhenverstellung HINWEIS: Dies ist für einen Monitor mit einem Ständer anwendbar. Halten Sie sich beim Kauf eines Alleskönner-Standfußes bitte an die Aufstellungsanweisungen des Handbuchs Ihres AlleskönnerStandfußes. Kippen, Schwenken Ist der Ständer am Monitor befestigt, können Sie diesen neigen und drehen, um den bestmöglichen Ansichtswinkel einzustellen. HINWEIS: Bei der Auslieferung ab Werk ist der Ständer noch nicht angebracht.
Höhenverstellung HINWEIS: Der Ständer kann um bis zu 130 mm nach oben ausgezogen werden. Die nachstehende Abbildung zeigt, wie Sie den Fuß ausziehen können. Monitor drehen Bevor Sie den Monitor drehen, sollte der Monitor komplett vertikal ausgezogen (Höhenverstellung) und geneigt sein, damit der untere Rand des Monitors nicht an der Aufstellfläche anschlägt.
Im Uhrzeigersinn drehen Entgegen dem Uhrzeigersinn drehen Monitor bedienen │ 77
Problemlösung ACHTUNG: Bevor Sie die in diesem Abschnitt beschriebenen Schritte ausführen, lesen und befolgen Sie bitte die Sicherheitshinweise. Selbsttest Ihr Monitor verfügt über eine Selbsttestfunktion, mit der Sie überprüfen können, ob der Monitor ordnungsgemäß funktioniert. Wenn Monitor und Computer ordnungsgemäß miteinander verbunden sind, der Monitorbildschirm jedoch leer bleibt, führen Sie bitte wie folgt den Monitor-Selbsttest aus: 1. Schalten Sie sowohl Computer als auch Monitor aus. 2.
Selbstdiagnose Ihr Monitor ist mit einem integrierten Selbstdiagnose-Werkzeug ausgestattet, das Ihnen bei der Diagnose von Problemen mit dem Monitor oder mit Computer und Grafikkarte helfen kann. HINWEIS: Die Selbstdiagnose kann nur ausgeführt werden, wenn kein Videokabel angeschlossen ist und sich der Monitor im Selbsttestmodus befindet. So starten Sie die Selbstdiagnose: 1. Überzeugen Sie sich davon, dass der Bildschirm sauber ist (kein Staub auf dem Bildschirm). 2.
4. Drücken Sie auf die Taste, um das Diagnose Symbol zu markieren und drücken Sie anschließend auf die erscheint. Taste, woraufhin ein grauer Bildschirm 5. Untersuchen Sie das Bild aufmerksam auf Unregelmäßigkeiten. 6. Drücken Sie die Taste 1 am Bedienfeld noch einmal. Der Bildschirm wird nun in rot angezeigt. 7. Untersuchen Sie das Bild auf Auffälligkeiten. 8. Wiederholen Sie die Schritte 6 und 7; das Bild wird der Reihe nach in grün, blau, schwarz, weiß und mit Text angezeigt.
Allgemeine Probleme In der folgenden Tabelle finden Sie grundlegende Informationen zu allgemeinen Monitorproblemen und zu möglichen Lösungen. Allgemeine Symptome Beschreibung Kein Bild Kein Bild/ Betriebsanzeige -LED leuchtet nicht Mögliche Lösungen • Achten Sie darauf, dass das Videosignalkabel richtig und fest an Monitor und Computer angeschlossen ist. • Überzeugen Sie sich davon, dass die Steckdose ausreichend Strom liefert, indem Sie einfach vorübergehend ein anderes Gerät anschließen.
Zittriges/ verwackeltes Videobild Unruhiges Bild oder leichte Bewegungen • Setzen Sie den Monitor auf die Werkseinstellungen zurück. • überprüfen Sie die Umgebungsbedingungen. • Bringen Sie den Monitor in einen anderen Raum und testen Sie ihn dort. • Dell Monitore sind so konzipiert, dass sie optimal mit den von Dell gelieferten Kabeln zusammenarbeiten. Dell übernimmt keine Garantie für die Videoqualität und die Leistung bei Verwendung von Kabeln anderer Hersteller.
Geometrische Verzerrungen Bild ist nicht richtig zentriert • Setzen Sie den Monitor auf die Werkseinstellungen zurück. • Passen Sie die horizontale und vertikale Position des OSD an. Horizontale/ vertikale Linien Bild weist eine oder mehrere Linien auf • Setzen Sie den Monitor auf die Werkseinstellungen zurück. • Führen Sie den Monitor-Selbsttest aus und prüfen Sie, ob die Linien auch im Selbsttestmodus vorhanden sind.
Fehlende Farben Im Bild fehlen Farben • Führen Sie den Monitorselbsttest aus. • Achten Sie darauf, dass das Videosignalkabel richtig und fest an Monitor und Computer angeschlossen ist. • Überprüfen Sie die Stecker am Videokabel auf verbogene oder abgebrochene Kontaktstifte. Falsche Farben Unzureichende • Ändern Sie je nach Anwendung die Farbdarstellung Einstellungen von Voreingestellte Modi im OSD-Menü Farbe. • Passen Sie den R/G/B Wert unter Benutzerfarbe im OSD-Menü Farbe an.
Produktspezifische Probleme Spezifische Symptome Beschreibung Mögliche Lösungen Bild ist zu klein Das Bild ist auf • Prüfen Sie die Längen-/Seitenverhältnis Einstellungen im OSD-Menü Display. dem Bildschirm • Setzen Sie den Monitor auf die zentriert, füllt Werkseinstellungen zurück.
Kein Video im PBP Modus am HDMI Anschluss bei der Wiedergabe von Filminhalten Beim Anschluss • Trennen/Stecken Sie das HDMI Kabel vom Docking-Geräteausgang wieder ein. an ein DockingGerät über den HDMI-Anschluss gibt es kein Video im PBP Modus, nachdem der Monitor ausgeschaltet und dann wieder eingeschaltet wurde. Kein Video am HDMIAnschluss Beim Anschluss • Ziehen Sie das HDMI Kabel vom DockingGerät ab und schließen Sie das Docking an ein DockingThunderbolt™ Kabel an das Notebook an.
Universal Serial Bus (USB) spezifische Probleme Spezifische Symptome USBSchnittstelle funktioniert nicht Beschreibung USB-Peripheriegeräte funktionieren nicht Mögliche Lösungen • Thunderbolt™ 3 Aktiv-Kabel trennen/ einstecken. • Vergewissern Sie sich, dass der Monitor eingeschaltet ist. • Schließen Sie das Thunderbolt™ 3 AktivKabel wieder an Ihren Computer an. • Trennen Sie USB-Peripheriegeräte (Downstream-Anschluss) ab, schließen Sie diese anschließend wieder an.
Es wird kein Kein Video bei Verwendung der Bild angezeigt Thunderbolt™ 3 Verbindung nach DC Ein/ Aus, Aufwachen aus dem Ruhemodus • Thunderbolt™ 3 Aktiv-Kabel trennen/ einstecken. • Überprüfen Sie, ob das angeschlossene Gerät mit der Thunderbolt™ 3 Spezifikation kompatibel ist. • Überprüfen Sie, ob das Thunderbolt™ 3 Aktiv-Kabel vom Computer an den USB-C Upstream-Port des Monitors angeschlossen ist. • Verwenden Sie das Thunderbolt™ 3 AktivKabel, das mit Ihrem Monitor geliefert wurde.
High-Speed USB 3.2Schnittstelle ist langsam • Vergewissern Sie sich, dass Ihr Computer High-Speed USB 3.2-kompatibel ist. USB 3.2Peripheriegerät • Manche Computer verfügen sowohl über e sind zu USB 3.1, USB 3.0, USB 2.0 als auch über langsam oder USB 1.1 Ports. Überzeugen Sie sich davon, funktionieren dass der richtige USB-Port genutzt wird. überhaupt • Trennen Sie das Upstream-Kabel zum nicht Computer ab, schließen Sie es anschließend wieder an.
Anhang ACHTUNG: Sicherheitshinweise ACHTUNG: Die Verwendung von anderen als in dieser Dokumentation angegebenen Bedienelementen, Anpassungen oder Verfahren kann zu Schock-, elektrischen und/oder mechanischen Gefahren führen. Weitere Informationen über Sicherheitshinweise finden Sie unter Sicherheit, Umweltschutz und Bestimmungen (SERI). FCC-Erklärung (nur für die USA) und weitere rechtliche Informationen Lesen Sie bitte die Webseite über rechtliche Konformität unter www.dell.
Kauf eines Thunderbolt™ 3 Passiv-Kabels Region Link https://www.dell.com/en-us/shop/accessories/apd/a9905599 Dell https://www.dell.com/en-us/shop/accessories/apd/a9905597 Webseite https://www.dell.com/en-us/shop/accessories/apd/a9269731 USA https://www.belkin.com/us/p/P-F2CD081/ https://www.delock.com/produkte/G_84846/merkmale.html/ EMEA https://www.hama.cz/hama-kabel-thunderbolt-3-usb-c-typ-cvidlice--vidlice-20-gb-s-100-w-1-m/ https://www.lindy-international.com/Thunderbolt-3-Cable2m.