White Papers

ManualsBrandsDell ManualsAudioUP2720Q

Calibration and Validation Techsheet

This document provides an overview of calibration and validation functions with the

built-in colorimeter for UP2720Q monitor, as well as recommended applications for

calibration and validation.

Calibration and Validation Applications

Calibration with matrix and 1D LUT

Calibration with 3D LUT

Correlation of built-in colorimeter

Monitor match

Device ICC emulation

Validate calibration target

Save/export calibrated target

Switching of presets

Basic color control

Upload calibrated targets

Manage CalMAN and internal

librated targets

Create ICC profiles

Apply ICC profiles

Quick access from tray icon

Target editing on PC

Scheduling internal calibration and

lidation

Dashboard for preset calibration

sta

tus

Functions

Software

CalMAN

Ready

Dell Color

Management

Dell

Calibration

Assistant

Color Calibration

•

Color Management

•

Calibration Management

•

••

eport for calibration and validation

results

• •

Summary of content (12 pages)

PAGE 1
Calibration and Validation Techsheet This document provides an overview of calibration and validation functions with the built-in colorimeter for UP2720Q monitor, as well as recommended applications for calibration and validation.
PAGE 2
Based on the purpose and timing of use, the following applications are recommended for color calibration and validation. CalMAN Ready Dell Color Management www.portrait.com/ www.dell.com/ p24mx7s/ UP2720Q Target user UP2720Q users with CalMAN Studio or CalMAN Ready for Dell license Purpose Calibration of user’s target workflow with external or built-in colorimeter Timing of Usage When calibration is needed Dell Calibration Assistant www.dell.
PAGE 3
Performing Color Calibration Perform Calibration with the built-in colorimeter to calibrate the color of your monitor. Using the OSD menu 1. Using the OSD menu, set the calibration criteria based on your preference. Then select Calibrate Now. NOTE: Calibration Module Power must be On to enable Calibration function. 2. The following message appears, select Yes to continue the process.
PAGE 4
3. Calibration will start automatically. Using the Shortcut Key with video signal 1. Press any of the Function buttons to display the shortcut keys. 2. Press the button. 3. The following message appears, select Yes to continue the process.
PAGE 5
4. Calibration will start automatically. Using the Shortcut Key without video signal You can perform calibration for the monitor without acquiring an input signal from the computer. 1. Press any of the Function buttons to display the shortcut keys. 2. Press the button.
PAGE 6
3. Calibration will start automatically. NOTE: Calibration at Portrait Mode is not recommended. Stopping the Calibration Process You can stop the calibration process at any time. 1. During calibration process, press any of the Function buttons, the following message appears. 2. Select Yes to stop the process.
PAGE 7
Performing Color Validation Perform Validation on color calibration with the built-in colorimeter. Using the OSD menu 1. Using the OSD menu, set the validation criteria based on your preference. Then select Validate Now to start the validation process. NOTE: Calibration Module Power must be On to enable Validation function. 2. The following message appears, select Yes to continue the process.
PAGE 8
3. Validation will start automatically. Using the shortcut key without video signal You can perform validation for the monitor without acquiring an input signal from the computer. 1. Press any of the Function buttons to display the shortcut keys. 2. Press the button. 3. The following message appears, select Yes to continue the process. NOTE: Validation at Portrait Mode is not recommended.
PAGE 9
Stopping the Validation Process You can stop the validation process at any time. 1. During validation process, press any of the Function buttons, the following message appears. 2. Select Yes to stop the process.
PAGE 10
Re-sync date and time In order for calibration and validation to start at the scheduled time, use the Set Date and Time function on the monitor OSD to sync the date and time for your monitor and your computer. Sync the date and time when: • Setting up the monitor for the first time • The monitor has been disconnected from power for more than 10 days.
PAGE 11
____________________ Information in this document is subject to change without notice. © 2019 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc.
PAGE 12
|