User's Manual

Troubleshooting 51
This Update Package is not
compatible with any of
the devices detected in
your system.
Select a compatible DUP for the
device(s) you want to update, and
try again.
The prerequisite software
version for this update was
not found. Software
application name: <name>
Current version: <version>
Required version: <version>
The DUP you selected cannot be
installed because a prerequisite
requirement was not met. Install the
appropriate prerequisite software
version, and try the update again.
You must use the -f option to
continue with the update in
the non-interactive mode.
The version of this DUP is either older
than or the same as the version
installed. To apply the DUP, you must
force execution.
The software to be updated was
not found. Install the
following software, and then
retry the update. Software
name: <name> Required version:
<version>
Your system does not contain the
software that matches the DUP.
The version of this Update
Package is newer than the
currently installed version.
Software application name:
<name> Package version:
<version> Installed version:
<version>
This message confirms the version of
the currently installed software before
the update is performed.
(Using the interactive mode) Type Y or
N when prompted to continue.
(Using the CLI) Specify the -f option.
The version of this Update
Package is older than the
currently installed version.
Software application name:
<name> Package version:
<version> Installed version:
<version>
The DUP you selected cannot be
installed because a newer version of the
software already exists on the system.
To install the older version:
(Using the interactive mode) Type Y or
N when prompted to continue.
(Using the CLI) Specify the -f option.
Table 5-1. Update Packages Message Information (continued)
Message Description/Solution