User's Manual

54 Troubleshooting
You must reboot the system for
the update to take effect.
If you shut down or power off the
system after performing an update, you
will lose the update.
After performing a BIOS update, do not
power off the system. Reboot the
system for the update to take effect.
An Update Package is already
running. Wait until it is
complete before proceeding
with another update.
You can run only one DUP at a time.
WARNING: DO NOT STOP THIS
PROCESS OR INSTALL OTHER DELL
PRODUCTS WHILE <BIOS|FRMW>
UPDATE IS IN PROGRESS. THESE
ACTIONS MAY CAUSE YOUR SYSTEM
TO BECOME UNSTABLE.
Do not interrupt DUP execution.
Cannot find utilities on the
system to execute package.
The package must have certain utilities
to execute.
Make sure the following
utilities are in the
path:<path>
The utilities named must be in the path
mentioned in the message.
File already exists. The package is attempting to overwrite
an existing file.
Rebuilding package
<package_name> to support
kernel version "kernel.x".
This process may take several
minutes to complete...
The DUP application is rebuilding
the package to support a different
kernel version.
No specific kernel version
specified! Building support
for current kernel...
Unable to determine current system
kernel. The DUP application attempts
to rebuild the package.
Cannot create directory
/extract directory. Please
ensure that there is
enough space.
Extracting the package to this
path requires more disk space than
is available.
Table 5-1. Update Packages Message Information (continued)
Message Description/Solution