Users Guide
</Category>
<SupportedDevices>
<Device componentID="159" embedded="1">
<Display lang="en"><![CDATA[Server System BIOS]]></Display>
</Device>
</SupportedDevices>
<SupportedSystems display="1">
<Brand key="3" prefix="PE">
<Display lang="en"><![CDATA[PowerEdge]]></Display>
<Model systemID="16D">
<Display lang="en"><![CDATA[2850]]></Display>
</Model>
</Brand>
</SupportedSystems>
<InstallInstruction fileName="PE2850_BIOS_WIN_A06.EXE" typeCode="LWXP">
<Display lang="en"><![CDATA[Dell Update Package Instructions for PE2850_BIOS_WIN_A06.EXE:
Installation:
Browse to the location where you downloaded the file and double-click PE2850_BIOS_WIN_A06.EXE.
Read over the release information presented in the dialog window.
Download and install any prerequisites identified in the dialog window before proceeding.
If this is a BIOS update package, install any necessary Embedded Systems Management firmware prior to this BIOS update.Otherwise, go next
step.
Click the Install button.
Follow the remaining prompts to perform the update.
]]></Display>
</InstallInstruction>
<RevisionHistory>
<Display lang="en"><![CDATA[* Updated Intel(R) Xeon(TM) Dual-Core Processor with 2x2MB L2 Cache A0 Stepping Microcode (Patch ID=0C).
Added code to support Dell SAS5/e adapter card.
Added code to increase the fan speeds if there are RAID Cards in the system.
]]></Display>
</RevisionHistory>
<ImportantInfo URL="http://support.dell.com/support/downloads/format.aspx?releaseid=R136644&c=us&l=en&s=gen&cs">
<Display lang="en"><![CDATA[When a RAID card is present in the system, the fan speeds will not increase unless the BMC firmware has been also
updated to version 1.68 or later.
]]></Display>
</ImportantInfo>
<Criticality value="1">
<Display lang="en"><![CDATA[Recommended-Dell recommends applying this update during your next scheduled update cycle.The update contains
feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS,
drivers and software).]]></Display>
</Criticality>
</SoftwareComponent>
Registered system log event source