Users Guide
信息
说明/解决方法
This Update Package is not compatible with your system (此更新软件包与系统不兼容)
Your system:(您的系统:)<Model NameN>
System(s) supported by this package:(此软件包支持的系统:)<Model NameN>
选择兼容的 DUP,并重新尝试更
新。
This Update Package cannot be executed under the current operating system.(此更新软件包不能在当前操作系统中执行。)
DUP 支持 Linux 操作系统和 --
rebuild 选项支持的内核,如"重
建软件包的"中解释的那样。
This Update Package is not compatible with any of the devices detected in your system.(此更新软件包与您系统上检测到的
任一设备都不兼容。)
为需要更新的设备选择一个兼容的
DUP,然后重新尝试。
The prerequisite software version for this update was not found.(未找到此更新的预先具备的软件版本。) Software
application name: (软件应用程序名称:)<名称> Package version:(软件包版本:)<版本> Installed version:(安装的版本:)<
版本>
所选的 DUP 不能安装,因为不满
足前提条件的要求。安装相应的需
要预先具备的软件版本,然后重新
尝试更新。
You must use the -f option to continue with the update in the noninteractive mode.(必须使用 -f 选项以非交互方式继续更
新。)
此 DUP 的版本比当前所装版本旧
或相同。要应用 DUP,必须强制执
行。
Thesoftwaretobeupdatedwasnotfound.(没有找到要更新的软件。) Install the following software, and then retry
the update.(安装以下软件,然后重新尝试更新。) Software name: (软件名称:)<名称> Required version:(要求的版本:)<版本>
系统没有与此 DUP 相匹配的软
件。
The version of this Update Package is newer than the currently installed version.软件应用程序名称:<名称> 软件包版本:
<版本> 安装的版本:<版本>
此信息在执行更新前确认当前所装
软件的版本。
(使用交互方式)在提示继续时键
入 Y 或 N。
(使用 CLI)指定 /f 选项。
The version of this Update Package is older than the currently installed version.(此更新软件包的版本比当前所装版本
旧。) Software application name: (软件应用程序名称:)<名称> Package version: (软件包版本:)<版本> Installed version:
(安装的版本:)<版本>
所选的 DUP 不能安装,因为系统
上已经有一个较新的软件版本。要
安装旧的版本:
(使用交互方式)在提示继续时键
入 Y 或 N。
(使用 CLI)指定 /f 选项。
The version of this Update Package is the same as the currently installed version. (此更新软件包的版本与当前所安装的
版本相同。)<版本> Software application name:(软件应用程序名称:)<名称> Package version:(软件包版本:)<版本>
Installed
version: (安装的版本:)<版本>
所选的 DUP 不能安装,因为系统
上已经有一个相同的软件版本。
(使用交互方式)在提示继续时键
入 Y 或 N。
(使用 CLI)指定 -f 选项。
This package is not compatible with the version of Server Agent on your system.(此软件包与系统上的 Server Agent 的版
本不兼容。) You must upgrade to Server Administrator before running this package.(运行此软件包前,必须升级到 Server
Administrator。)
使用 support.dell.com 上提供
的其他更新方法。
This update package requires an OpenIPMI driver.(此更新软件包要求使用 OpenIPMI 驱动程序。) Currently no OpenIPMI
driver is installed on the system. (系统当前没有安装 OpenIPMI 驱动程序。)
无法安装您选择的 DUP,因为系统
上没有安装 OpenIPMI 驱动程
序。
In order to assist in the<update|install>,you can download and install a version of the OpenIPMI driver that
meets the minimum version requirement from the Dell Support website at support.dell.com.(为帮助进行<更新|安装>,您可
从 Dell 支持网站 support.dell.com 下载并安装一个能满足最低版本要求的 OpenIPMI 驱动程序的版本。) The minimum version
required is (最低版本要求为)<版本>。
从 Dell 支持网站下载并安装符合
最低要求的 OpenIPMI 驱动程
序。
This Update Package requires a newer version of the OpenIPMI driver than is currently installed on the system,
which is version(此更新软件包要求采用比系统上当前安装版本更新的 OpenIPMI 驱动程序,即版本)<版本>。
系统当前安装的 OpenIPMI 驱动
程序不满足所选 DUP 的最低版本
要求。
Kernel source for the running kernel is not installed, and the currently installed OpenIPMI driver RPM was
installed without the kernel source for the running kernel. (未安装当前运行内核的内核源文件,而且当前安装的 OpenIPMI 驱
动程序 RPM 安装时无当前运行内核的内核源文件。) In order to install OpenIPMI driver modules for the running kernel that
meet the minimum version requirement, you must install kernel source for the running kernel, and then use DKMS
(see man page for dkms) to install and build OpenIPMI driver modules for the running kernel. (为安装满足最低版本要
求的当前运行内核的 OpenIPMI 驱动程序模块,您必须安装当前运行内核的内核源文件,然后用 DKMS(请参阅 man 页面中的 dkms)来安装和建
立当前运行内核的 OpenIPMI 驱动程序模块。)
To install kernel source for the running kernel, install the <filename> RPM
that is applicable to the running kernel. (要安装当前运行内核的内核源文件,应安装适用于当前运行内核的<文件名> RPM。)
安装当前运行内核的内核源文件,
然后使用动态内核模块支持
(DKMS) 框架来安装和建立当前运
行内核的 OpenIPMI 驱动程序模
块。
您必须通过安装内核所要求
的 .rpm 文件来安装内核源文件。
有关使用 DKMS 的信息,请参阅
man 页面中的 DKMS。
Kernel source for the running kernel is installed, but the currently installed OpenIPMI driver RPM was installed
without the kernel source for the running kernel.(安装了当前运行内核的内核源文件,但当前安装的 OpenIPMI 驱动程序 RPM 安装
时无当前运行内核的内核源文件。) In order to install OpenIPMI driver modules for the running kernel that meet the
minimum version requirement, use DKMS (see man page for dkms) to install and build OpenIPMI driver modules for
the running kernel. (为了安装满足最低版本要求的当前运行内核的 OpenIPMI 驱动程序模块,应使用 DKMS[请参阅 man 页面中 dkms]来安
装和建立当前运行内核的 OpenIPMI 驱动程序模块。)
使用 DKMS 来安装和建立当前运
行内核所要求的 OpenIPMI 驱动
程序模块。
有关使用 DKMS 的信息,请参阅
man 页面中的 DKMS。
Youmustrebootthesystemfortheupdatetotakeeffect.(必须重新引导系统以使更新生效。)
如果在执行更新后关机或切断系统
电源,将会丢失此次更新。
执行完一次 BIOS 更新后,不要切
断系统电源。重新引导系统以使更
新生效。
An Update Package is already running.(已经运行着一个更新软件包。) 请等待它完成,然后再继续其它更新。
一次只能运行一个 DUP。
WARNING:DO NOT STOP THIS PROCESS OR INSTALL OTHER DELL PRODUCTS WHILE UPDATE IS IN PROGRESS.(警告:在 "BIOS|FRMW"
请勿中断 DUP 执行。