Owner's Manual

file:///T|/htdocs/SOFTWARE/smdup/dup63/en/readme/lin/DUP_linux_readme.txt[10/23/2012 10:42:36 AM]
4. Press "e" on the kernel line (below the uppermem line).
Edit the kernel line with mem=800M and press “Enter”.
5. Press "b" to boot with these options.
6. Perform the firmware update.
* BIOS update may issue the following kernel messages on the console
and in "/var/log/messages":
dcd***: disagrees about the version of symbol struct_module
dcd***: Unknown symbol get_user_size
dcd***: Unknown symbol put_user_size
Ignore these messages because they do not refer to errors in BIOS
update.
----------------------------------------------------------------------
ESM Firmware, BMC Firmware, BP Firmware, and DRAC 5 Firmware
----------------------------------------------------------------------
* Dell Update Packages for BMC, BP, ESM, and DRAC 5 require the
OpenIPMI driver to be loaded on your system. The current drivers
can be downloaded from the Dell Support website at
"www.support.dell.com."
Linux OpenIPMI
Operating driver
System version RPM files
-------- -------- ---------
Red Hat 33.13 "dkms-2.0.13-1.noarch.rpm"
Enterprise "openipmi-33.13.RHEL4-1dkms.noarch.rpm"
Linux 4
SUSE Linux 36.8 "dkms-2.0.13-1.noarch.rpm"
Enterprise "openipmi-36.8.SLES9-1dkms.noarch.rpm"
Server 9
NOTE: For SUSE Linux Enterprise Server version 10 and version 11,
use the OpenIPMI driver provided with the operating system to run
for Dell Update Packages.
----------------------------------------------------------------------
Dell Embedded Open Manage Server Administrator
----------------------------------------------------------------------
The Dell Update Package for Dell Embedded OpenManage Server
Administrator can only be applied in a pre-operating system
environment that uses ELI through the Dell OpenManage(TM) Deployment
Toolkit (DTK).
----------------------------------------------------------------------
DRAC 5 firmware
----------------------------------------------------------------------