Owner's Manual

38 Command Line Interface Reference
4DEP_HARD_ERRORHard
dependency
error
The required prerequisite software
was not found on your system.
The update was unsuccessful
because the system did not meet
BIOS, driver, or firmware
prerequisites for the update to be
applied, or because no supported
device was found on the target
system. The DUP enforces this
check and blocks an update from
being applied if the prerequisite is
not met, preventing the system
from reaching an invalid
configuration state.
The prerequisite can be met by
applying another DUP, if available.
In this case, the other package
should be applied before the
current one so that both updates
can succeed. A
DEP_HARD_ERROR cannot be
suppressed by using the /f switch.
5 QUAL_HARD_ERROR Qualification
error
The DUP is not applicable to
the system. Some possible
explanations are:
• The operating system is not
supported by the DUP.
• The system is not supported by
the DUP.
• The DUP is not compatible with
the devices found in your system.
A QUAL_HARD_ERROR cannot
be suppressed by using the /f
switch.
Table 5-3. Exit Codes
(continued)
Value Message Name Display Name Description