Owner's Manual

* Dell Update Packages for BMC, BP, ESM, and DRAC 5 require the
OpenIPMI driver to be loaded on your system. The current drivers
can be downloaded from the Dell Support website at
"www.support.dell.com."
Linux OpenIPMI
Operating driver
System version RPM files
-------- -------- ---------
Red Hat 33.13 "dkms-2.0.13-1.noarch.rpm"
Enterprise "openipmi-33.13.RHEL4-1dkms.noarch.rpm"
Linux 4
SUSE Linux 36.8 "dkms-2.0.13-1.noarch.rpm"
Enterprise "openipmi-36.8.SLES9-1dkms.noarch.rpm"
Server 9
NOTE: For SUSE Linux Enterprise Server version 10 and version 11,
use the OpenIPMI driver provided with the operating system to run
for Dell Update Packages.
----------------------------------------------------------------------
Dell Embedded Open Manage Server Administrator
----------------------------------------------------------------------
The Dell Update Package for Dell Embedded OpenManage Server
Administrator can only be applied in a pre-operating system
environment that uses ELI through the Dell OpenManage(TM) Deployment
Toolkit (DTK).
----------------------------------------------------------------------
DRAC 5 firmware
----------------------------------------------------------------------
* Before updating the DRAC firmware, ensure that the following
conditions are met:
- USB is enabled
- IPMI is working properly
- DRAC Virtual Flash is not in use either by the operating system
or by any other application
* The Linux DUP in this release may not work on RHEL 5. It works on
earlier versions of RHEL. In cases where it does not work, use the
web pack to perform this update.
----------------------------------------------------------------------
Power Supply Unit firmware
----------------------------------------------------------------------
* Power Supply Unit firmware updates can be performed only on Life
Cycle Controller enabled systems.
----------------------------------------------------------------------
All PERC firmware and all SAS firmware