Owner's Manual

Update and Rollback in USC - LCE 29
4
Update and Rollback in Unified
Server Configurator - Lifecycle
Controller Enabled
Dell Unified Server Configurator - Lifecycle Controller Enabled (USC -
LCE) is an embedded configuration utility that enables systems and storage
management tasks from an embedded environment throughout the system’s
life cycle.
Residing on an embedded flash memory card, USC - LCE is similar to a BIOS
utility in that it can be started during the boot sequence and can function
independently of an installed operating system.
Using USC - LCE, you can quickly identify, download, and apply system
updates without searching the Dell Support website at support.dell.com. You
can also configure your system BIOS and system devices (such as NIC, RAID,
and iDRAC), deploy an operating system, and run diagnostics to validate your
system and the attached hardware.
NOTE: Certain platforms or systems may not support the full set of features
provided by USC - LCE.
Update in USC LCE
You can update your system BIOS, iDRAC firmware, power supply firmware,
RAID firmware, and NIC firmware. Use the Platform Update wizard to
display a list of available updates for your system.