Owner's Manual

26 Performing BIOS and Firmware Updates
Updating BIOS and Firmware Using CLI
Run the following command to inventory the system and scan the repository
for new versions of components:
update_firmware
This command provides information about the existing versions of
components on your system and the list of component versions that are
available to be installed.
To install all applicable BIOS and firmware updates on your system, run the
following command:
update_firmware --yes
Once the devices are updated, the "Execution Success" message is displayed.
Updating BIOS and Firmware Using GUI
To start the interactive GUI, run the following command:
inventory_firmware_gui
The Inventory and Update Firmware window displays the existing versions of
components on your system and the component versions that are available to
be installed.
To update BIOS and firmware on your system to the versions available in the
repository:
1
Select the required devices to be updated and click Update Firmware .
The
Update Firmware dialog box is displayed.
2 Click Continue to update page ....
You can also click
Show Details to view the list of selected devices and
their versions.
3 Click Update Now to start performing the updates.
Once the devices are updated, the execution success message is displayed
for each device.
You can also perform the following: