Owner's Manual

44 Linux Troubleshooting
Messages
Table 6-1 provides descriptions and solutions to messages that you may
receive when running DUPs.
Table 6-1. Messages
Message Description/Solution
This Update Package is not
compatible with your system
Your system: <Model NameN>
System(s) supported by this
package: <Model NameN>
Select a compatible DUP, and try the
update again.
This Update Package cannot be
executed under the current
operating system.
DUPs support Linux operating systems
and kernels supported by the
--
rebuild
option.
This Update Package is not
compatible with any of
the devices detected in
your system.
Select a compatible DUP for the
device(s) you want to update, and
try again.
The prerequisite software
version for this update was
not found. Software
application name: <name>
Current version: <version>
Required version: <version>
The DUP you selected cannot be
installed because a prerequisite
requirement was not met. Install the
appropriate prerequisite software
version, and try the update again.
You must use the -f option to
continue with the update in
the non-interactive mode.
The version of this DUP is either older
than or the same as the version
installed. To apply the DUP, you must
force execution.
The software to be updated was
not found. Install the
following software, and then
retry the update. Software
name: <name> Required version:
<version>
Your system does not contain the
software that matches the DUP.