Dell Update Packages for Microsoft Windows Version 7.
This Readme contains updated information for your "Dell Update Packages for Microsoft Windows perating Systems User's Guide" and any other technical documentation included with the Dell Update Packages for Windows operating systems. What’s New BIOS - Staged update HDD DUP support behind S110 Support for Daisy chained SEP and Expander SWRAID 3.
PowerVault MD1220 firmware PowerVault RD1000 firmware Broadcom Network Adapter driver Intel Network Adapter driver Power Supply firmware Broadcom Network Adapter Firmware Minimum Requirements The Update Packages support Dell systems running the following Windows operating systems: Microsoft Windows Server 2008 SP2 Standard, Enterprise, and Datacenter x86 Editions Microsoft Windows Server 2008 SP2 Standard, Enterprise, and Datacenter x64 Editions Microsoft Windows Server 20
ESM firmware IDE controllers Drivers ESM3, ESM4 CERC ATA 100, SI680A, CERC/SATA 2S, and CERC SATA 6ch drivers ---------------------------------------------------------------------------------------------------BMC firmware BMC ---------------------------------------------------------------------------------------------------SCSI BP firmware BP ---------------------------------------------------------------------------------------------------SAS BP BP ---------------------------------------------------------
On some servers running Windows 2000 Server, the digital signature information of signed Dell Update Packages displays the message "The certificate is not valid for requested usage." Root Cause: The message is caused by an out-of-date root certificate on the server. Solution: To update the root certificate: 1) Enable Windows Update. 2) Go to "www.update.microsoft.com". 3) Select "Custom" to perform a scan of the machine for updates. After the scan completes, it will list all available updates.
Unified Server Configurator (USC) Dell Update Packages (DUPs) Lifecycle controller updates require system services to be enabled. For the first time, before you attempt to run Driver Package Diagnostics DUPs, execute the USC DUP. If the operating system is installed from "Operating System Deployment", select "Reboot and Exit" in the USC environment before booting to the operating system. This closes the USC session which is held for 18 hours.
Dell Embedded Open Manage Server Administrator The Dell Update Package for Dell Embedded Open Manage Server Administrator can only be applied in a pre-operating system environment that uses the Embedded Linux (ELI) through the Dell OpenManage Deployment Toolkit (DTK). BMC firmware and BP firmware When upgrading the BMC/ESM firmware or the BP firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, the update may take up to 20 minutes to complete.
background task to complete before attempting to upgrade the firmware. "Patrol Read" tasks will not affect a firmware upgrade. PowerVault firmware The PowerVault update procedure requires the RAID controller to be in a known good state. If a problem occurs with the RAID controller during the update procedure, the Update Packages cannot communicate with the PowerVault system, inventory its firmware version, or perform the update.
Trademarks used in this text: Dell™, the DELL logo, Dell Precision™, OptiPlex™, Latitude™, PowerEdge™, PowerVault™, PowerConnect™, OpenManage™, EqualLogic™, KACE™, FlexAddress™, and Vostro™ are trademarks of Dell Inc. Intel®, Pentium®, Xeon®, and Celeron® are registered trademarks and Core™ is a trademark of Intel Corporation in the U.S. and other countries. AMD® is a registered trademark and AMD Opteron™, AMD Phenom™, and AMD Sempron™ are trademarks of Advanced Micro Devices, Inc.
