Users Guide

Redundancy 106
Figure 90. Dell Network Management Card Shutdown Parameters
Use Case #4
You want to have a shutdown when the remaining time of the last UPS is 10 min. In this case, each server
can have an individual shutdown duration (10 min, 8 min, 3 min…).
• You need to configure a shutdown duration of 10 min in the Dell MUMC .
– Figure 91 illustrates the Dell MUMC default configuration available from
Settings > Shutdown > Edit Shutdown Configuration .
NOTE: This is the default configuration on the Dell Network Management Card (refer to the previous use case).
Figure 91. Edit Shutdown Configuration Dialog Box
0119_2-Dell MUMC UG.book Page 106 Saturday, November 2, 2013 4:59 PM