User guide
Manuals
Brands
Dell Manuals
Computer Hardware
UPS 2700R
21
22
23
24
25
26
27
28
29
30
Table Of Contents
Dell Line-Interactive Rack UPS 1000W, 1920/1500W, and 2700/2300W User's Guide
Notes and Warnings
Table of Contents
Introduction
Finding Information
Safety Warnings
Installation
Inspecting the Equipment
Unpacking the Cabinet
Identifying the UPS Rear Panels
Identifying the UPS Front Panel
UPS Setup
Rackmount Setup
Tower Setup
Installing the EBM
Installing the UPS
Installing Remote Emergency Power-off
UPS Initial Startup
Operation
UPS Startup and Shutdown
Starting the UPS
Starting the UPS on Battery
UPS Shutdown
Control Panel Functions
Changing the Language
Display Functions
Startup Screen
Screen Locked
UPS Status
Event Log
Measurements
Control Screens
Identification
Settings
Retrieving the Event Log
Behavior on Overload
Configuring Load Segments
Controlling Load Segments Through the Display
Configuring Automatic Start Delay
Configuring Automatic on Battery Shutdown
Configuring Battery Settings
Configuring the UPS for an EBM
Running Automatic Battery Tests
Configuring Automatic Battery Tests
Configuring Automatic Restart
Additional UPS Features
RS-232 and USB Communication Ports
Dell Network Management Card (Optional)
Dell UPS Management Software
UPS Maintenance
UPS and Battery Care
Transporting the UPS
Storing the UPS and Batteries
When to Replace Batteries
Testing Batteries
Updating the UPS Firmware
Specifications
Troubleshooting
Accessing Alarms and Conditions
UPS Status Menu
Event Log Menu
Typical Alarms and Conditions
Silencing the Alarm
25
Installation
|
2
Loosen the thumbscrew on the metal battery cover, slide the cover to the right, and open (see
Figure 20).
Figure 20. Opening the Metal Battery Cover
3
Connect the internal battery connector.
Figure 21. Connecting the Internal Battery Connector
1
...
...
23
24
25
26
27
...
...
73
