User's Manual

34 | Setting Up the Monitor

Using the Mobile-High Definition Link (MHL)

NOTE: This monitor is MHL certified.

NOTE: To use the MHL function, use only MHL certified cable and source devices

that support MHL output.

NOTE: Some MHL source devices may take more than a few seconds or longer to

output an image, depending on MHL source devices.

NOTE: When the connected MHL source device enters Standby mode, the monitor

displays a black screen or the message below, depending on MHL source device's

output.

To enable MHL connection, please perform the below steps:

1. Plug the power cable on your monitor into a AC outlet.

2. Connect the (micro) USB port on you MHL source device to HDMI (MHL) 1 or HDMI

(MHL) 2 port on the monitor with a MHL certified cable. (See

Bottom View

for

details)

3. Turn On the monitor and the MHL source device.

4. Select input source on monitor to HDMI (MHL) 1 or HDMI (MHL) 2 by using OSD

Menu (See

Using the On-Screen Display (OSD) Menu

for details.)

5. If the monitor does not display an image, see

Mobile High-Definition Link (MHL)

Specific Problems