DVD VIDEO PLAYER DN-V210/DN-V310 USER GUIDE MODE D’EMPLOI GUÍA DEL USUARIO
IMPORTANT TO SAFETY WARNING: To reduce the risk of fire and electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus CAUTION 1.Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord.
SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Read Instructions – All the safety and operating instructions should be read before the product is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to. Follow Instructions – All operating and use instructions should be followed.
CAUTION: (English) To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user. Copyrights 2 It is prohibited by law to reproduce, broadcast, rent or play discs in public without the consent of the copyright holder.
NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO / NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA • Avoid high temperatures. Allow for sufficient heat dispersion when installed on a rack. • Vermeiden Sie hohe Temperaturen. Beachten Sie, daß eine ausreichend Luftzirkulation gewährleistet wird, wenn das Gerät auf ein Regal gestellt wird.
CAUTION • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. • No naked flame sources, such as lighted candles, should be placed on the apparatus. • Attention should be drawn to the environmental aspects of battery disposal. • The apparatus shall not be exposed to dripping or splashing for use. • No objects filled with liquids, such as vases, shall be placed on the apparatus.
A NOTE ABOUT RECYCLING: (English) This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. When discarding the unit, comply with local rules or regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning chemical waste.
z x c v b n m , . ⁄0 ⁄1 ⁄2 FEATURES ............................................................. 2 DISCS .................................................................... 3 CAUTIONS ON HANDLING DISCS ....................... 5 CONNECTIONS ..................................................... 6 PART NAMES AND FUNCTIONS ........................ 14 REMOTE CONTROL UNIT .................................. 16 LOADING DISCS ................................................. 19 CHANGING THE DEFAULT SETTINGS .....
ACCESSORIES ENGLISH Please check to make sure the following items are included with the main unit in the carton: q Audio cord ......................................................................1 w Video cord ......................................................................1 e Video cord (COMPONENT) ............................................1 r Remote control unit (RC-963) ........................................1 t R03/AAA batteries .........................................................
• The types of discs listed on the table below can be used on the DN-V210/DN-V310. The marks are indicated on the disc labels or jackets. Usable discs Recorded signals Mark (logo) DVD video DVD audio (NOTE 1) 12 cm Digital audio + Digital video (MPEG2) R DVD-R DVD-RW (NOTE 2) Disc size R 8 cm R W ENGLISH x DISCS NOTE 3: According to recording quality, some CD-R/RW cannot be played. NOTE 4: “Windows Media™”, “Windows®” are a trademarks of Microsoft Corporation, Inc.
ENGLISH ■ Patent information Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #:5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved. DivX, DivX Certified, and associated logos are trademarks of DivX, Inc.
Discs ENGLISH c CAUTIONS ON HANDLING DISCS Cautions on Handling Discs Only the discs including the marks shown on page 5 can be played on the DN-V210/DN-V310. Note, however, that discs with special shapes (heart-shaped discs, hexagonal discs, etc.) cannot be played on the DNV210/DN-V310. Do not attempt to play such discs, as they may damage the player. • Do not get fingerprints, grease or dirt on discs. • Be especially careful not to scratch discs when removing them from their cases.
ENGLISH v CONNECTIONS NOTES: • Read the manuals of all the components when making connections. • Keep the power cord unplugged until all connections have been completed. • If the power is on when connections are made, noise may be generated and damage the speakers. • Be sure to connect the left and right channels properly, L (left) to L, R (right) to R. • Plug the power cord securely into the power outlet. Incomplete connection may result in noise.
ENGLISH (2) Connecting to a TV or Monitor Equipped with Color Component Input Connectors Color component output connectors (PR/CR, PB/CB and Y) The red (PR/CR), blue (PB/CB) and brightness (Y) signals are output independently, achieving more faithful reproduction of the colors. • The color component input connectors may be marked differently on some TVs or monitors (PR, PB and Y/R-Y, B-Y and Y/CR, CB and Y, etc.). For details, refer to the TV’s operating instructions.
ENGLISH (3) Connecting to a TV with 21-pin SCART Terminal (For only Europe model) • Use the commercially 21-pin SCART cable to connect the TV’s 21-pin SCART terminal to the DN-V210/DN-V310’s 21-pin SCART terminal (AV1). • Select “RGB” for the video output setting at the setup screen video setup. • CVBS and RGB signal are output from the SCART terminal (AV1). When “RGB” is selected, no video signals are output from the component output. When “RGB” is selected, CVBS and RGB are output.
ENGLISH (4) Connecting to a AV amplifier with a Built-in decoder When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from the DVD player’s digital audio output connectors. If a Dolby Digital or DTS decoder is connected, you can achieve sound with the power and sense of presence of a movie theater or concert hall.
ENGLISH ■ Sound output from the DN-V210/DN-V310’s digital audio output connectors In the case of bit stream output Settings DIGITAL OUTPUT Audio recording format NORMAL PCM Dolby Digital Dolby Digital bitstream 2 channels PCM (48 kHz / 16 bit) DTS DTS bitstream — MPEG Audio 2 channels PCM (48 kHz / 16 bit) 2 channels PCM (48 kHz / 16 bit) DVD video In the case of PCM output Settings 96 k LPCM OUT 96 kHz Audio recording format DVD video Linear PCM 96 k > 48 k Copy protection ON Copy protect
(5) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.) ENGLISH ✽ Set the “AUDIO SETUP” default setting as shown below. (See page 26.) • “DIGITAL OUTPUT” → “PCM” “96k LPCM OUT” → “96k>48k” Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers.
ENGLISH (7) Connecting to a HDMI device HDMI Terminal This unit has one HDMI output. It can send digital video and analog signals from DVDs. It minimizes signal degradation caused by analog conversion so that high quality images can be enjoyed. Select an HDMI output mode from the SETUP MENU. (See page 23.) NOTES: • When the HDMI output is connected to a display monitor that does not support HDCP, signals are not output. To view images in HDMI, it is necessary to connect to a display that supports HDCP.
ENGLISH NOTES: • When connected to a monitor (i.e., TV, projector, etc.) that does not support HDCP, video and audio are not output. • Disconnecting or connecting cables with the power on can damage the equipment. Turn the power off before disconnecting or connecting cables. • Depending on the quiality of the cable used, the HDMI signal may be affected by noise.
ENGLISH b PART NAMES AND FUNCTIONS (1) Front Panel !6 !5 !4 !3 !2 !7 q w q POWER button • Press once to turn the power on. • Press again to set to the “OFF” position and turn the power off. • Set the power to the standby mode by pressing the POWER button on the remote control unit while the power is on. • Turn the power on from the standby mode by pressing the POWER button on the remote control unit. w Disc tray • Load discs here. (See page 19.
@7 @6 !8 !9 @0 ENGLISH (2) Rear Panel @5 @1 @2 @3 !8 Audio output connectors (AUDIO OUT) • Connect using the included audio cord. !9 SERIAL REMOTE terminal (DN-V310 only) • This is the terminal for serial control from an external device. @0 Digital audio output connector (OPTICAL) • Connect using an optical fiber cable (available in stores). • Digital data is output from this connector. @1 21-pin SCART terminal (AV1) (Europe model only) • Connect using a 21-pin SCART cable (available in stores).
ENGLISH n REMOTE CONTROL UNIT ■ The DN-V210/DN-V310 can be controlled from a distance using the included remote control unit (RC-963). (1) Inserting Batteries q Remove the remote control unit’s rear cover. Cautions On Batteries • Use R03/AAA batteries in this remote control unit. • Replace the batteries with new ones approximately once a year, though this depends on the frequency with which the remote control unit is used.
ENGLISH (3) Names and Functions of Remote Control Unit Buttons ■ Button not explained here function in the same way as the corresponding buttons on the main unit. q DVD POWER button Press this to switch the power between on and standby. w Number buttons Use these to input numbers. Use the +10 button to input numbers of 10 or over. Example: To input 25 +10 +10 q DVD POWER !3 OPEN/CLOSE 5 e SUBTITLE button Press this to switch the DVD’s subtitle language.
ENGLISH !6 RANDOM button Press this to play the tracks on the video or music CD in random order. !7 CLEAR button Press this to clear numbers that you have input. !8 A-B REPEAT button (A-B) Use this to repeat sections between two specific points. !9 REPEAT button Press this to play tracks repeatedly. @0 MENU button The DVD menu stored on the disc is displayed. @1 RETURN button Press this to return to the no on screen display.
■ Set discs in the disc tray with the labeled (printed) side facing up. • Pick up the disc carefully so as not to touch the signal surface and hold it with the labeled side facing up. • With the disc tray fully open, set the disc in the disc tray. • Set 12 cm discs in the outer tray guide (Figure 1), 8 cm discs in the inner tray guide (Figure 2). • Press the OPEN/CLOSE button. The disc is automatically loaded. • The disc tray can also be closed automatically to load the disc by pressing the PLAY button.
ENGLISH , CHANGING THE DEFAULT SETTINGS ■ Make the initial settings to suit your usage conditions before starting playback. The initial settings are retained until they are next changed, even if the power is turned off. RC-963 TOP MENU /PBC MENU 3 ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE SLOW/SEARCH 1 1 PLAY SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW 2 Turn on the power. • Press the power button, the power indicator lights and the power turns on.
ENGLISH Setup items for use Bold characters indicate factory defaults. The mark of is indicated when SETUP MENU MODE is set up by an EXPERT. DISC SETUP VIDEO SETUP HDMI RES.
ENGLISH When “VIDEO SETUP” is selected TOP MENU /PBC MENU 2,3 ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE SLOW/SEARCH 1 1 PLAY SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW Set the “VIDEO SETUP” in SETUP mode. (See page 20.) Use the 5 and ∞ cursor buttons to select the desired setting. HDMI RES. Use this to select whether HDMI output is ON/OFF, and the resolution. Interlace or Progressive can be selected for Component output. TV ASPECT Use this to set the shape of your TV’s screen.
ENGLISH Press the ENTER button to decide the menu item. q When “HDMI RES.” (HDMI Resolution) is selected: Use the 5 and ∞ cursor buttons to select the HDMI out, press the ENTER button to decide. • AUTO : When HDTV and HDMI are connected, some TVs may automatically decide the appropriate HDMI RES. • OFF : HDMI is turned OFF. When this is set, Component Video output switches to Interlace. • 480p/576p : HDMI switches ON, and the output resolution is 480p/576p.
ENGLISH Switching HDMI RES. on the main unit: Press and hold the SHIFT and ¢ buttons for 3 seconds. The current status is shown in the display for 2 seconds. Continue holding down the SHIFT button and press the HDMI RES. button to switch the status. The status display is shown for 2 seconds in the display. • When RGB (SCART) is selected, switching is not possible. RGB appears on the display if you press the button. (See page 25.
t When “SHARPNESS” is selected: Use the 5 and ∞ cursor buttons to select the level, press the ENTER button to decide. The factory default setting is BASIC. The screen sharpness can be adjusted in steps from +7 to –7. The sharpness settings will differ depending on the model of your TV. Set to suit your TV. 3 y When “VIDEO OUT” is selected: (Europe model only) Use the 5 and ∞ cursor buttons to select the video out, press the ENTER button several times and select the video out.
ENGLISH When “AUDIO SETUP” is selected TOP MENU /PBC MENU 2,3 ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE SLOW/SEARCH PLAY SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW 1 1 Set the “AUDIO SETUP” in SETUP mode. (See page 20.) Use the 5 and ∞ cursor buttons to select the desired setting. DIGITAL OUTPUT Use this to select the digital output’s signal format. 96k LPCM OUT Use this to set the digital audio output when playing DVDs recorded in linear PCM audio.
3 e When “DYNAMIC RANGE” is selected: Use the 5 and ∞ cursor buttons to select the “ON” or “OFF”, press the ENTER button to decide. MAX (Factory default) Dynamic range control is not operating. You can hear the original audio. MID Dynamic range control operates at the mid-level. The size difference between sounds becomes a little smaller. MIN Dynamic range control operates at the maximum level. The size difference between sounds is reduced to the smallest level.
ENGLISH When “DISC SETUP” is selected TOP MENU /PBC MENU 2,3 ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE SLOW/SEARCH 1 1 PLAY SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW Set the “DISC SETUP” in SETUP mode. (See page 20.) Use the 5 and ∞ cursor buttons to select the desired setting. DIALOG Use this to set the language of the sound output from the speakers. SUBTITLE Use this to set the language of the subtitles displayed on the TV.
3 w When “ SUBTITLE” is selected: Use the 5 and ∞ cursor buttons to select the language, press the ENTER button to decide. ENGLISH (Factory default) Select this when you want to play the DVD with the subtitles in English. FRENCH Select this when you want to play the DVD with the subtitles in French. SPANISH Select this when you want to play the DVD with the subtitles in Spanish. GERMAN Select this when you want to play the DVD with the subtitles in German.
ENGLISH e When “DISC MENUS” is selected: Use the 5 and ∞ cursor buttons to select the language, press the ENTER button to decide. ENGLISH (Factory default) Select this when you want to display the menus in English. FRENCH Select this when you want to display the menus in French. SPANISH Select this when you want to display the menus in Spanish. GERMAN Select this when you want to display the menus in German. ITALIAN Select this when you want to display the menus in Italian.
3 u When “ANGLE MARK” is selected: Use the 5 and ∞ cursor buttons to select “ON”or“OFF”, press the ENTER button to decide. ON (factory default) The angle mark is displayed when scenes at which angles are recorded are played. OFF The angle mark is not displayed, even when scenes at which angles are recorded are played. u i When “CAPTIONS” is selected: Use the 5 and ∞ cursor buttons to select “ON”or“OFF”, press the ENTER button to decide.
ENGLISH NOTES: • An English caption decoder is required to display English captions. , , mark. • DVDs with caption signals are indicated by the English captions cannot be displayed when playing DVDs which do not contain caption signals. • The characters in which the captions are displayed (capital letters, small letters, italics, etc.) depend on the DVD and cannot be selected with the DN-V210/DN-V310.
TOP MENU /PBC ENGLISH When “SYSTEM SETUP” is selected MENU 2,3 ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE SLOW/SEARCH PLAY SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW 1 1 Set the “SYSTEM SETUP” in SETUP mode. (See page 20.) Use the 5 and ∞ cursor buttons to select the desired setting. OSD LANGUAGE Use this to set the language for the default setting screen and messages displayed on the TV screen (“PLAY”, etc.) WALL PAPER Use this to select the image to be shown on the screen in the stop mode.
ENGLISH Press the ENTER button to decide the menu item. q When “OSD LANGUAGE” is selected: Use the 5 and ∞ cursor buttons to select the language, press the ENTER button to decide. ENGLISH (Factory default) Select this to set the OSD language to English. FRANÇAIS Select this to set the OSD language to French. ESPAÑOL Select this to set the OSD language to Spanish. DEUTSCH Select this to set the OSD language to German.
t SYSTEM SETUP OSD LANGUAGE WALL PAPER ENGLISH BLACK 8 RATING LEVEL PASSWORD DEFAULT SETUP MENU MODE CHANGE RESET EXPERT PARENTAL CONTROL y When “SETUP MENU MODE” is selected: Use the 5 and ∞ cursor buttons to select the setup mode, press the ENTER button to decide. BASIC (Factory default) EXPERT The number of setting items for the various settings can be increased.
ENGLISH When “DivX SETUP” is selected TOP MENU /PBC MENU 2,3 ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE SLOW/SEARCH PLAY SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW 1 1 Set the “DivX SETUP” in SETUP mode. (See page 20.) Use the 5 and ∞ cursor buttons to select the desired setting. DivX SUBTITLE Set which language to be initially displayed when playing back a DivX® video disc. DivX REGISTRATION Acquires the DivX registration card of the DVD video player that you purchased.
3 w When “DivX REGISTRATION” is selected: 1. Press the ENTER button. 2. The registration code is displayed. • The acquired code is for on demand DivX® video only. Do not use the same code for a different application or website. ENGLISH C.
ENGLISH . PLAYBACK (1) Playback DVD POWER 2, 4 OPEN/CLOSE 3 2, 4 TOP MENU /PBC MENU 7 6 ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE 1 1 5 SLOW/SEARCH PLAY SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW 1 Turn on the power. • Press the power button, the power indicator lights and the power turn on. • When standby mode, press the DVD POWER button of remote control unit. Main unit OPEN/CLOSE 2 Press the OPEN/CLOSE button to open the disc tray. Main unit 3 38 Set the disc in the disc tray.
4 Press the OPEN/CLOSE button. • For many interactive DVDs and video CDs with playback control, a menu screen appears. In this case use the procedure in step 6 to select the desired item. ✽ Interactive DVDs are DVDs including multiple angles, stories, etc. Main unit Example: For DVDs with menu screens TOP MENU Apple Banana Orange Strawberry Peach Pineapple ENGLISH OPEN/CLOSE Remote control unit Example: For video CDs with playback control 1. Opening 2. 1st movement 3. 2nd movement 4.
ENGLISH TOP MENU /PBC MENU ENTER STOP button ANGLE RETURN DISPLAY STOP STILL/PAUSE SLOW/SEARCH SLOW/SEARCH buttons STILL/PAUSE button STOP button STILL/PAUSE button PLAY SKIP SKIP buttons SETUP NTSC/PAL ZOOM SLIDE SHOW SKIP button (2) Stopping Playback During playback, press the STOP button on the main unit or the remote control unit, playback stops and wall paper is displayed.
During playback, press one of the SLOW/SEARCH buttons on the remote control unit. 1 : Reverse direction ¡ : Forward direction • When pressed again, the search speed increases (in four steps). • Variable in 3 steps for CDs and video CD discs, 4 steps for DVD video. • Press the PLAY button to resume normal playback.
ENGLISH ⁄0 PLAYING REPEATEDLY ■ Use this function to play your favorite audio or video sections repeatedly. Playing Repeatedly (Repeat Playback) 1 2 3 4 5 6 7 8 9 PROG / DIRECT CALL 0 +10 SUBTITLE AUDIO CLEAR RANDOM REPEAT A-B REPEAT 1 RC-963 In the play mode, • Main unit : Press the SHIFT and 4 buttons simultaneously for 3 seconds. • Remote control unit : Press the REPEAT button.
r For MP3/WMA • Normal playback • Normal playback View Filter t For JPEG/DivX ENGLISH e For CD • Normal playback View Filter Repeat : Off Repeat : Off Mode : Normal Mode : Normal • File repeated • Track repeated • File repeated View Filter TRACK REPEAT View Filter Repeat : Single Repeat : Single Mode : Normal Mode : Normal • Folder repeated FOLDER REPEAT • Entire disc repeated 1 • Folder repeated View Filter View Filter Repeat : Folder Repeat : Folder Mode : Normal
ENGLISH Playing a Certain Section Repeatedly (A-B Repeat Playback) DVD POWER OPEN/CLOSE 1 2 3 4 5 6 7 8 PROG / DIRECT CALL 9 0 +10 SUBTITLE AUDIO CLEAR RANDOM REPEAT A-B REPEAT 1,2 RC-963 A TO B SET A 1 During playback, press the A-B button. • This sets start point A. Remote control unit A TO B SET B 2 Press the A-B button again. • This sets end point B, and repeat playback of the A-B section starts.
■ Use this function with DVD, Video CD, CD, MP3, WMA, DivX and JPEG to play the tracks in the desired order. 1 2 3 4 5 6 7 8 9 0 +10 PROG / DIRECT 2 1 CALL CLEAR RANDOM /PBC MENU 2 ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE PLAY 3 SLOW/SEARCH PROGRAM NO. TITLE Mode :PROGRAM 1 For DVD: In the stop mode, press the PROG/DIRECT button once. • The program selection screen appears. 01 ... PLAY 02 ... Clear Program 03 ... 04 ... 05 ...
ENGLISH NOTE: • Programmed playback is not possible when PBC is turned on with video CDs. Press the TOP MENU button to turn PBC off. 1 2 3 4 5 6 7 8 9 PROG / DIRECT 2 CALL 0 +10 SUBTITLE AUDIO CLEAR RANDOM REPEAT A-B REPEAT /PBC 1 MENU 2 ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE PLAY 3 SLOW/SEARCH PROGRAM NO. TRACK Mode :PROGRAM 1 For Video CD: In the stop mode, press the PROG/DIRECT button once. • The program selection screen appears. 01 ... PLAY 02 ...
1, 2, 3, 4 ENGLISH RC-963 TOP MENU /PBC MENU ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE PLAY 5 1 SLOW/SEARCH SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW File Menu 1 For CD/MP3/WMA/DivX/JPEG: Use the 3, 5 and ∞ cursor buttons to turn the Edit Mode at the top right of the file menu ON. • When playing CD/MP3/WMA files, the file menu is always displayed on the screen. • When playing JPEG/DivX, press the MENU or STOP button to display the file menu.
ENGLISH 5 Press the PLAY button. • Playback of the tracks in the programmed order begins. Main unit Remote control unit ✽ When there are less than 2 folders for MP3/WMA/JPEG/DivX files: Repeat steps 2 and 3 above for each individual folder, and add files to be programmed. The added files can be verified in the Program View. ✽ To returan to normal playback: Use the 3, 5 and ∞ cursor buttons to select “Browser View” in the file menu. Press the ENTER button to display the all tracks or files.
■ Use this function with Video CD, CD, MP3, WMA, DivX and JPEG to play the tracks in random order. This function does not affect with DVD. NOTE: • Random playback is not possible when PBC is turned on with video CDs. Press the TOP MENU button to turn PBC off. CALL 7 8 9 0 +10 SUBTITLE AUDIO CLEAR RANDOM REPEAT A-B REPEAT 1 RC-963 TOP MENU /PBC MENU ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE PLAY 2 SLOW/SEARCH 1 2 For Video CD: In the stop mode, press the RANDOM button.
ENGLISH ⁄3 USING THE ON-SCREEN DISPLAY ■ Use this function to display and change information on the disc (titles, chapters, time, etc.) 1 2 3 4 5 6 7 8 9 PROG / DIRECT CALL NOTE: • The on-screen display function does not work when PBC is turned on with video CDs. Press the TOP MENU button to turn PBC off.
ENGLISH ⁄4 USING THE MULTIPLE AUDIO, SUBTITLE AND ANGLE FUNCTIONS Switching the Audio Language (Multiple Audio Function) ■ With DVDs containing multiple audio language signals, the audio language can be switched during playback.
ENGLISH Switching the Subtitle Language (Multiple Subtitle Function) ■ With DVDs containing multiple subtitle language signals, the subtitle language can be switched during playback. 1 2 3 4 5 6 7 8 9 PROG / DIRECT CALL 0 +10 SUBTITLE AUDIO CLEAR RANDOM REPEAT A-B REPEAT 1,2 RC-963 TOP MENU /PBC MENU ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE SLOW/SEARCH PLAY SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW 1 SUBTITLE 1/2 ENG During playback, press the SUBTITLE button.
Switching the Angle (Multiple Angle Function) TOP MENU /PBC ENGLISH ■ With DVDs containing multiple angle signals, the angle can be switched during playback. MENU ENTER ANGLE 1,2 RETURN DISPLAY STOP STILL/PAUSE SLOW/SEARCH PLAY SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW 3/5 1 During playback, press the ANGLE button. • The current angle number is displayed. Remote control unit 4/5 2 Use the ANGLE button to select the desired angle.
ENGLISH ⁄5 USING THE MENUS Using the Top Menu ■ For DVDs containing multiple titles, the desired title can be selected and played from the top menu. 1 2 3 4 5 6 7 8 9 PROG / DIRECT CALL 0 +10 SUBTITLE AUDIO CLEAR RANDOM REPEAT A-B REPEAT 2 RC-963 1 TOP MENU /PBC MENU ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE SLOW/SEARCH 3 2 PLAY SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW Example: TOP MENU 1 During playback, press the TOP MENU button. • The top menu appears.
■ Some DVDs include special menus called DVD menus. For example, DVDs with complex contents may contain guide menus, and DVDs with multiple languages may contain audio and subtitle language menus. These menus are called “DVD menus”. Here we describe the general procedure for using DVD menus.
ENGLISH ⁄6 PLAYING IN THE ZOOM MODE 1 2 3 4 5 6 7 8 PROG / DIRECT CALL 9 0 +10 SUBTITLE AUDIO CLEAR RANDOM REPEAT A-B REPEAT RC-963 TOP MENU /PBC 2 MENU ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE SLOW/SEARCH PLAY SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW 1 1 2 In the play or pause mode, press the ZOOM button. • The zoom rate increases each time the ZOOM button is pressed.
Listening to MP3/WMA CD, CD-Rs and CD-RWs ■ There are many music distribution sites on the internet from which music files in MP3/WMA format can be downloaded. Music downloaded as instructed on the site and written onto a CD-R/RW disc can be played on the DN-V210/DN-V310. If music recorded on commercially available music CDs is converted on a computer into MP3/WMA files using an MP3/ WMA encoder (conversion software), the data on a 12 cm CD is reduced into about 1/10 the amount of the original data.
ENGLISH Use the 5 and ∞ cursor buttons to select the MP3/WMA file you want to play, then press the PLAY button or ENTER button. • Playback starts. UP. . . Edit Mode : Off File 01 Program View File 02 Add to Program File 03 File 04 3 ✽ The display can be switched between the single elapsed time and the single remaining time by pressing the DISPLAY button. ✽ To change the MP3/WMA file Press the STOP button, then use the 5 and ∞ cursor buttons to reselect the desired MP3/WMA file.
■ Uses of recordings you have made other than for your personal enjoyment are not permitted under the copyright law without permission of the copyright holder. Playing still pictures stored on CD-Rs/RWs TOP MENU /PBC 1 MENU 1 3 2,3 ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE PLAY 3 SLOW/SEARCH SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW 1 Load the CD-R/RW on which the still pictures have been written into the DN-V210/DN-V310.
ENGLISH UP. . . View Filter Fiel_01 Repeat : Off Fiel_02 Mode : Normal Fiel_03 Use the 5 and ∞ cursor buttons on the remote control unit to select the still picture file from which you want to start the slide show, then press the PLAY button or ENTER button on the remote control unit. • The slide show starts. • Only the still picture files in the selected folder are played. 3 ✽ Once all the still picture files in the folder have been played, the disc information screen reappears.
ENGLISH Special play modes for MP3/WMA and JPEG files • FOLDER (the MP3/WMA and JPEG files in the folder are played in order starting from the selected file) • FOLDER REPEAT (all the MP3/WMA and JPEG files in the folder are played repeatedly starting from the selected file) • DISC (all the MP3/WMA and JPEG files on the disc are played in order starting from the selected file) • DISC REPEAT (all the MP3/WMA and JPEG files on the disc are played repeatedly starting from the selected file) • RANDOM ON (all th
ENGLISH ⁄9 DivX FILE PLAYBACK Playing Picture CDs (JPEG format) ■ Playing Picture CDs The DN-V210/DN-V310 can play Kodak Picture CDs, so you can view the photographs stored on them on a TV screen. (Picture CDs is CDs containing photographs taken on conventional silver film cameras which have been converted into digital data. For details on Picture CDs, please contact a store providing Kodak development services.
Playing DivX movies stored on CD-Rs/RWs TOP MENU /PBC 1 ENGLISH ■ DivX files recorded onto CD-Rs or CD-ROMs can be played back. MENU 1 3 2,3 ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE PLAY 3 SLOW/SEARCH SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW 1 Load the CD-R/RW disc on which the DivX files have been written into the DN-V210/DN-V310. (See page 19.) • When the disc is loaded in the DN-V210/DN-V310, the disc information screen appears.
ENGLISH Use the 5 and ∞ cursor buttons on the remote control unit to select the DivX file you want to start the DivX movies, then press the PLAY button or ENTER button on the remote control unit. • Playback starts. UP. . . View Filter DivX_02 Repeat : Off DivX_03 Mode : Normal File_01 File_02 File_03 3 ✽ The display can be switched between the single elapsed time and the single remaining time by pressing the DISPLAY button.
■ MP3/WMA/DivX files and JPEG files are displayed in the file menu. Both file menus are displayed if the CD contains a mix of MP3/WMA/DivX files and JPEG files. File Menu 001_1 If you want to display only the MP3/WMA/DivX or JPEG files, select “View Filter” at the top right as shown below. Audio : Display MP3 and WMA Photo : Display JPEG Video : Display MPEG/DivX To perform filter settings, line up the cursor to “View Filter” and press ENTER.
ENGLISH ¤0 ADVANCED FUNCTION KEY LOCK ■ Operation of the buttons on the front panel (aside from the POWER button) is disabled to prevent accidental operation. 1 1 1 Press the SHIFT and PLAY buttons simultaneously for 3 seconds. The KEY LOCK indicator lights (green) and the KEY LOCK mode is turned on. • When the KEY LOCK mode is turned on, the KEY LOCK indicator flashes (green) if one of the buttons on the front panel (aside from the POWER button) is operated.
HIDE OSD 1 1 ENGLISH ■ Switch the OSD and the display of the icons that appear on the screen on and off. 1 HIDE OSD indicator Press the SHIFT and STOP buttons simultaneously for 3 seconds. The HIDE OSD indicator lights (green), the HIDE OSD mode is turned on, and the OSD as well as the letters and icons displayed when buttons are operated are not displayed. • To turn the HIDE OSD mode off, press the SHIFT and STOP buttons again simultaneously for 3 seconds.
ENGLISH Change the Image on the DVD Player Wallpaper ■ The image on the DVD player wallpaper can be changed at the user’s discretion. RC-963 1 1 3 4 4 4 TOP MENU /PBC MENU 2 ENTER ANGLE RETURN DISPLAY STOP STILL/PAUSE PLAY 3 SLOW/SEARCH SKIP SETUP NTSC/PAL ZOOM SLIDE SHOW 1 Load the CD-R/RW on which the JPEG file for wallpaper have been written into the DN-V210/DN-V310. • When the disc is loaded in the DN-V210/DN-V310, the disc information screen appears.
3 UP. . . ENGLISH Select the JPEG file to be set as the wallpaper and play it. Use the 5 and ∞ cursor buttons on the remote control unit to select the still picture file from which you want to start the slide show, then press the PLAY button or ENTER button on the remote control unit. • The slide show starts. • Only the still picture files in the selected folder are played.
ENGLISH Serial Remote Control (DN-V310 only) ■ Commands can be sent to the DVD player and the status requested and sent to the host via RS-232C. This DVD player can be controlled by a PC. Connect the player and a serial port on the PC with a 9-pin RS-232C straight cable. To control this DVD player by a PC, set the RS232C switch on the rear panel to RS-232C.
■ Hand shake flow chart • Control command and Status command DN-V310 ENGLISH ReturnValue can have one of the following values 0 : No error x : Error code x • Response command PC DN-V310 PC Control command OK Asynchronous response Control Status Answer data ■ Error Codes Name Code Description ecEXT_ERR_OK 0 No error ecEXT_ERR_UNKNOWN 1 Cause of error not known ecEXT_ERR_INVALID_PARA 2 Invalid parameter ecEXT_ERR_INV_CMD 5 Command not valid ecEXT_ERR_INVALID_NA_DISC_ERROR 10 Command
■ External control status ENGLISH Group Command Player status ReturnValue, Status see Status codes Disc type ReturnValue, Disc Type see DiscType codes GetAST Current audio stream ReturnValue, AudioStreamNumber 1~8 GetSPST Current sub-picture stream ReturnValue, SubPictureStreamNumber 0~32 GetT Current title ReturnValue, Title/Track Number 0~99 GetC Current chapter ReturnValue, Titlle Number, Chapter Number title : 1~99 chp : 1~999 GetStatus GetDiscType PC Parameter Status codes 0
Keys/Functions RC codes (decimal) 0 CURSOR UP 88 1 CURSOR DOWN 89 Digit 2 2 CURSOR LEFT 90 Digit 3 3 CURSOR RIGHT 91 Digit 4 4 ENTER 92 Digit 5 5 MENU 113 Digit 6 6 SETUP 130 Digit 7 7 RETURN 131 Digit 8 8 ANGLE 133 Digit 9 9 +10 180 DVD POWER 12 CLEAR 181 RANDOM 28 CALL 182 REPEAT 29 NTSC/PAL 183 SLOW/SEARCH (+) 40 SLIDE SHOW 184 SLOW/SEARCH (–) 41 DISPLAY 200 PLAY 44 ZOOM 247 PAUSE 48 STOP 49 Keys/Functions RC codes (decimal) Digit 0 Di
ENGLISH ¤1 TROUBLESHOOTING Check again before assuming the player is malfunctioning. ■ Are all the connections correct? ■ Are you following the instructions in the manual? ■ Are the amplifier and speakers operating properly? If the DN-V210/DN-V310 does not seem to be functioning properly, check the table below. If this does not solve the problem, the DN-V210/DN-V310 may be damaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest sales office.
Signal system: Applicable discs: S-Video output: Video output: Component output: RGB output: HDMI output: Audio output: NTSC/PAL (1) DVD discs 1-layer 12 cm single-sided discs, 2-layer 12 cm single-sided discs, 2-layer 12 cm double-sided discs (1 layer per side) 1-layer 8 cm single-sided discs, 2-layer 8 cm single-sided discs, 2-layer 8 cm double-sided discs (1 layer per side) (2) Compact discs (CD-DA, Video CD) 12 cm discs, 8 cm discs Y output level: 1 Vp-p (75 Ω/ohms) C output level: 0.
D&M Holdings Inc. PROFESSIONAL BUSINESS COMPANY TOKYO, JAPAN http://www.dm-pro.
