Setup and Specifications
Battery
Table 18. Battery specications
Type
• Polymer 3-cell 42 WHr
• Polymer 4-cell 60 WHr
• Polymer 4-cell 60 WHr (LCL)
Dimension Polymer 3-cell 42 WHr
• Width: 95.9 mm (3.78 in)
• Length: 200.5 mm (7.89 in)
• Height: 5.7 mm (0.22 in)
Polymer 4-cell 60 WHr and LCL
• Width: 95.9 mm (3.78 in)
• Length: 238 mm (9.37 in)
• Height: 5.7 mm (0.22 in)
Weight (maximum)
• Polymer 3-cell 42 WHr: 192.5 g (0.42 lb)
• Polymer 4-cell and LCL: 270 g (0.60 lb)
Voltage 11.4 VDC
Life span
• Polymer 3-cell 42 WHr and 4-cell 60 WHr (Standard Pack): 300
discharge / charge cycles
• Polymer 4-cell 60 WHr (LCL): 1000 discharge / charge cycles
Charging time when the computer is o (approximate)
• Standard Charge: 0°C to 50°C : 4 hours
• Express Charge
†
:
– 0°C to 15°C : 4 hours
– 16°C to 45°C : 2 hours
– 46°C to 50°C : 3 hours
Operating time Varies depending on operating conditions and can signicantly
reduce under certain power-intensive conditions
Temperature range: Operating
• Charging: 0°C to 50°C (32°F to 122°F)
• Discharging : 0°C to 70°C (32°F to 158°F)
Temperature range: Storage -20°C to 60°C (-4°F to 140°F)
Coin-cell battery CR 2032
NOTE:
†
For batteries with the ExpressCharge feature, the battery will typically have at least an 80% charge after about an hour
of charging with the system o, and fully charged in about 2 hours with the system o.
Enabling ExpressCharge requires that both the computer and the battery used be ExpressCharge capable. If these requirements are
not met, ExpressCharge will not be enabled.
Technical specications 17