Release Notes

22 Release Notes
Incorrect devices
are classified
under the
Processor section
in the Hardware
Status tab of the
VMware vSphere
Server.
Devices like vFlash,
disk-drive bays, internal
dual SD module
(IDSM) and so on, may
be displayed in the
Processor tab of the
Hardware Health
Status page of the
VMware vSphere Server.
This is a cosmetic issue.
There is no loss of
functionality.
ESX/ESXi
4.0.x
RAID 10 virtual
disks are displayed
as RAID 1 in
VMware vSphere
Server/
VI Client.
RAID 10 configured in
H200 controller is
reported as RAID 1 in
VMware vSphere Server/
VI Client.
This is a cosmetic issue.
There is no loss of
functionality.
ESX/ESXi
4.0.x
In Critical Array,
the sensor is not
asserted in
VMware vSphere
Server/
VI Client.
In the VMware vSphere
Server Hardware Health
Status page, in Critical
Array, the sensor is not
asserted for the drives
which are part of the
degraded array.
The issue arises because
the Storage Controller
firmware of SAS
IR/H200 controllers do
not assert the sensor.
There is no loss of
functionality.
ESX/ESXi
4.0.x
Issue Description Resolution Applies to