Release Notes

Solution: Copy the ISO image contents to the web server location, and run the following
commands:
cd<ISO image content Location>
mv dell-con.v00 Dell-Con.v00
mv dell-lic.v00 Dell-Lic.v00
This issue will be fixed in a future release of the Dell-customized VMware ESXi
image.
DHCP lookup failed message is displayed on the DCUI
Description: Every time you reboot the system, the following message is displayed on the Direct
Control User Interface (DCUI): DHCP lookup failed. You may be unable
to access this system until you customize its network
configuration
Applies to: ESXi 5.x
Solution: If you are able connect to the system using DHCP IP even after receiving the
warning message, press <Enter> on the DCUI screen to resolve the issue.
PERC H310 mini controller is displayed as MegaRAID SAS
SKINNY controller
Description: The PowerEdge RAID Controller (PERC) H310 Mini controller is displayed as
MegaRAID SAS SKINNY controller in the Virtual Center and the ESXi shell.
Applies to: ESXi 5.x
Solution: This is a known issue. The PERC H310 Mini controller is displayed as MegaRAID SAS
SKINNY controller due to an incorrect name provided in the pci.ids file for PERC
H310. The issue will be fixed in a future release of ESXi.
ESXi with BIOS versions older than 1.2.6 may crash under
heavy load
Description: On Dell systems installed with Intel Xeon E5-2600 processor series, the ESXi host
may crash under heavy load.
Applies to: ESXi 5.0
Solution: Upgrade the BIOS of the systems to a minimum version 1.2.6 or later.
Drive type listed as non-SSD for datastores created with
SSD
Description: For virtual disks created with SSDs, the datastores drive type may be listed as Non-
SSD.
27