Release Notes

3. To load the drivers, run Vmkload_mod ipmi_si_drv
Power supply unit status and details are displayed
incorrectly in vSphere WebClient or vCenter Server
Description: On the Dell PowerEdge C6320 systems, the status and details of power supply unit
(PSU) are displayed incorrectly. The PSU report is displayed as Not Installed on
the Hardware Health Status tab, in vCenter Server. The PSU report is displayed as
Normal on the Hardware Health Status tab, in vSphere WebClient.
Applies to: ESXi 5.5 Update 2 installed on PowerEdge C630
Solution: This is a known issue. Dell recommends to use Dell OpenManage for monitoring or
managing the systems with ESXi.
Temperature status of the processor may display
incorrectly in vSphere WebClient or vCenter Server
Description: On the Dell PowerEdge C6320 systems, when the temperature of the processor
crosses critical thresholds, the temperature status of the processor may display
incorrectly on the Hardware Health Status tab of vCenter Server or vSphere
WebClient.
Applies to: EESXi 5.5 Update 2 installed on PowerEdge C630
Solution: This is a known issue. Dell recommends to use Dell OpenManage or iDRAC for
monitoring or managing the systems with ESXi.
Storage related sensor details are not available in vSphere
WebClient or vCenter Server
Description: On the Dell PowerEdge C6320 systems, the vSphere WebClient does not display
hard disk drive, system board riser, and drive cable information under the Storage
and Cable/Interconnect sensor section.
Applies to: ESXi 5.5 Update 2 installed on PowerEdge C630
Solution: This is a known issue. Dell recommends to use Dell OpenManage or iDRAC for
monitoring or managing the systems with ESXi.
Samsung NVMe PCIe SSD device is displayed as an XS
device under the PCIe passthrough section
Description: NVMe PCIe SSDs such as Samsung NVMe SM1715 3.2 TB device is not listed under
the PCIe passthrough section on VMware vCenter server. The controller is listed as
an XS device instead of the SM device.
Applies to: ESXi 5.5.x
9