Users Guide

On switch one:
MX9116-A2(config)#
MX9116-A2(config)# interface range ethernet 1/1/1-1/1/16
MX9116-A2(conf-range-eth1/1/1-1/1/16)# switchport mode trunk
MX9116-A2(conf-range-eth1/1/1-1/1/16)# switchport trunk allowed vlan 96,1711-1715,2711
MX9116-A2(conf-range-eth1/1/1-1/1/16)# mtu 9216
MX9116-A2(conf-range-eth1/1/1-1/1/16)# no shutdown
MX9116-A2(conf-range-eth1/1/1-1/1/16)# exit
MX9116-A2(config)#
On switch two:
MX9116-A2(config)#
MX9116-A2(config)# interface range ethernet 1/1/1-1/1/16
MX9116-A2(conf-range-eth1/1/1-1/1/16)# switchport mode trunk
MX9116-A2(conf-range-eth1/1/1-1/1/16)# switchport trunk allowed vlan 96,1711-1715,2712
MX9116-A2(conf-range-eth1/1/1-1/1/16)# mtu 9216
MX9116-A2(conf-range-eth1/1/1-1/1/16)# no shutdown
MX9116-A2(conf-range-eth1/1/1-1/1/16)# exit
Save your switch configuration on each MX9116N switch using the following command:
MX9116-A2(config)# do write mem
Verify switch configuration
The MX9116N switches are now configured with the minimum required settings to support the deployment of Cloud Foundation. Each of
the following should now be configured:
• All required VLANs and subnets
• VLT Domain
• VLTi
• VLT Link Aggregations
• Link Aggregations
• Host facing ports
Manual switch configuration
39