Dell Vostro 14–3468 Lastniški priročnik Regulativni model: P76G Regulativni tip: P76G002
Opombe, svarila in opozorila OPOMBA OPOMBA označuje pomembne informacije, ki vam pomagajo bolje izkoristiti računalnik. POZOR SVARILO označuje možnost poškodb strojne opreme ali izgube podatkov in svetuje, kako se izogniti težavi. Opozorilo OPOZORILO označuje možnost poškodb lastnine, osebnih poškodb ali smrti. © 2018–2019 Dell Inc. ali njegove podružnice. Vse pravice pridržane. Dell, EMC in druge blagovne znamke so blagovne znamke družbe Dell Inc. ali njenih hčerinskih družb.
Kazalo 1 Delo z računalnikom...................................................................................................................... 7 Varnostna navodila................................................................................................................................................................ 7 Preden začnete delo v notranjosti računalnika...................................................................................................................7 Izklop računalnika..
Gumbasta baterija............................................................................................................................................................... 26 Odstranjevanje gumbaste baterije............................................................................................................................... 26 Nameščanje gumbaste baterije....................................................................................................................................
Prepoznavanje procesorjev v operacijskem sistemu Windows 7............................................................................ 50 Preverjanje uporabe procesorja v možnosti Upravitelj opravil (Upravitelj opravil)................................................50 Preverjanje uporabe procesorja v možnosti Resource Monitor (Nadzor nad viri).................................................51 Nabori vezij......................................................................................................
5 Diagnostika izboljšanega predzagonskega ocenjevanja sistema (ePSA)........................................... 76 Potek zagona diagnostičnega orodja ePSA......................................................................................................................76 6 Tehnični podatki......................................................................................................................... 77 7 Vzpostavljanje stika z družbo Dell..........................................................
1 Delo z računalnikom Varnostna navodila Uporabite naslednja varnostna navodila, da zaščitite računalnik pred morebitnimi poškodbami in zagotovite lastno varnost. Če ni označeno drugače, postopki v tem dokumentu predpostavljajo, da veljajo naslednji pogoji: • • prebrali ste varnostna navodila, priložena vašemu računalniku. Komponento lahko zamenjate ali – če ste jo kupili ločeno – namestite tako, da postopek odstranjevanja izvedete v obratnem vrstnem redu.
11. Pritisnite gumb za vklop/izklop in vzpostavite delovanje sistemske plošče. POZOR Pred odpiranjem pokrova vedno odklopite računalnik iz stenske vtičnice, da preprečite možnost električnega udara. POZOR Preden se dotaknete česar koli znotraj računalnika, se ozemljite tako, da se dotaknete nebarvane kovinske površine, kot je kovina na hrbtni strani računalnika. Med delom se občasno dotaknite nepobarvane kovinske površine, da sprostite statično elektriko, ki lahko poškoduje notranje komponente. 12.
2 Razstavljanje in sestavljanje Priporočena orodja Za postopke, navedene v tem dokumentu, boste potrebovali naslednja orodja: • • • Izvijač Phillips #0 Izvijač Phillips #1 majhno plastično pero. Seznam velikosti vijakov Tabela 1.
Pogled ohišja Pogled odprtega računalnika s sprednje strani 1. Kamera 3. Mikrofon 5. Lučka stanja napajanja in lučka stanja baterije/lučka dejavnosti trdega diska 10 Razstavljanje in sestavljanje 2. Lučka za stanje kamere 4.
Pogled z leve strani 1. Priključek za napajanje 3. Priključek VGA 5. Priključek USB 3.1 1. generacije 2. Omrežni priključek (brez indikatorske lučke LED) 4. Priključek HDMI 1.4 6. Priključek USB 3.1 1. generacije Pogled naslona za dlani 1. Gumb za vklop/izklop 2.
3. Bralnik prstnih odtisov 5. Sledilna ploščica 4. Naslon za dlani Pogled z desne strani 1. Bralnik kartic SD 3. Priključek USB 2.0 5. Reža za varnostni kabel 2. Univerzalna vrata za zvok 4. Optični pogon Baterija Odstranjevanje baterije 1. Upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. 2. Baterijo odstranite tako: a) Potisnite zaklep za sprostitev, da odklenete baterijo [1]. b) Odstranite baterijo iz računalnika [2].
Nameščanje baterije 1. Baterijo vstavite v režo in jo pritisnite, da se zaskoči na mesto. 2. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Optični pogon Odstranjevanje optičnega pogona 1. Upoštevajte navodila v razdelku Preden začnete delo v notranjosti računalnika. 2. Odstranite baterijo. 3. Optični pogon odstranite tako: a) Odvijte vijaka M2L3, s katerima je optični pogon pritrjen na računalnik [1]. b) S plastičnim pisalom jeziček potisnite v smeri puščice na ohišju. [2].
Odstranjevanje nosilca optičnega pogona 1. Upoštevajte navodila v razdelku Preden začnete delo v notranjosti računalnika. 2. Odstranite: a) Baterija b) optični pogon 3. Odstranjevanje optičnega pogona z nosilca: a) Odvijte vijak M2L2 (z veliko glavo 05), s katerim je pritrjen nosilec optičnega pogona. b) Z optičnega pogona odstranite nosilec.
Nameščanje nosilca optičnega pogona 1. Namestite nosilec optičnega pogona. 2. Privijte vijak M2L2 (z veliko glavo 05), da pritrdite nosilec optičnega pogona. 3. Namestite: a) optični pogon b) Baterija 4. Upoštevajte navodila v razdelku Ko končate delo v notranjosti računalnika. Nameščanje optičnega pogona 1. Optični pogon vstavite v režo, da se zaskoči. 2. Privijte vijaka M2L3, da optični pogon pritrdite na računalnik. 3. Namestite baterijo. 4.
4. Odstranjevanje kabla tipkovnice: a) Kabel tipkovnice odklopite s sistemske plošče. b) Tipkovnico odstranite iz računalnika.
Nameščanje tipkovnice 1. Priključite kabel tipkovnice v priključek na sistemski plošči. 2. Potisnite tipkovnico, da jo poravnate z jezički. 3. Pritisnite tipkovnico vzdolž zgornjega roba, da se zaskoči. 4. Namestite baterijo. 5. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Pokrov podnožja Odstranjevanje pokrova osnovne plošče 1. Upoštevajte navodila v razdelku Preden začnete delo v notranjosti računalnika. 2. Odstranite: a) Baterija b) optični pogon c) Tipkovnica 3.
4. Obrnite računalnik in odstranite vijake (trije vijaki – M2L2; dva vijaka – M2L2; osem vijakov – M2,5L8), s katerimi je pokrov osnovne plošče pritrjen na računalnik [1, 2, 3].
5. Pokrov osnovne plošče odstranite tako: a) S peresom privzdignite robove pokrova osnovne plošče [1]. b) Dvignite pokrov osnovne plošče in ga odstranite z računalnika [2].
Nameščanje pokrova osnovne plošče 1. Pokrov osnovne plošče poravnajte z odprtinami za vijake na računalniku. 2. Pritiskajte robove pokrova, da se zaskoči. 3. Privijte vijake (osem vijakov – M2,5L8; trije vijaki – M2L2; dva vijaka – M2L2), da pokrov osnovne plošče pritrdite na računalnik. 4. Obrnite računalnik. 5. Odprite zaslon in priključek optičnega pogona priklopite na sistemsko ploščo. 6. Privijte tri vijake M2L5, da pokrov osnovne plošče pritrdite na naslon za dlani. 7.
3. Postopek odstranjevanja sklopa trdega diska: a) Kabel trdega diska odklopite od priključka na sistemski plošči [1]. b) Odvijte vijaka M2L3, s katerima je sklop trdega diska pritrjen na računalnik [2]. c) Sklop trdega diska dvignite iz računalnika [3]. Odstranjevanje trdega diska z nosilca 1. Upoštevajte navodila v razdelku Preden začnete delo v notranjosti računalnika. 2. Odstranite: a) b) c) d) e) Baterija optični pogon Tipkovnica Pokrov osnovne plošče sklop trdega diska 3.
Nameščanje trdega diska na nosilec 1. Poravnajte odprtine za vijake in trdi disk vstavite v nosilec trdega diska. 2. Privijte štiri vijake M3L3, s katerimi je trdi disk pritrjen na nosilec trdega diska. 3. Priključek kabla trdega diska priklopite na trdi disk. 4. Namestite: a) b) c) d) e) sklop trdega diska Pokrov osnovne plošče Tipkovnica optični pogon Baterija 5. Upoštevajte navodila v razdelku Ko končate delo v notranjosti računalnika. Nameščanje sklopa trdega diska 1.
f) Plošča V/I 3. Odstranjevanje bralnika prstnih odtisov: a) Bralnik prstnih odtisov odklopite od priključka na sistemski plošči [1]. b) Odvijte vijak M2L2,5, s katerim je sklop trdega diska pritrjen na računalnik [2, 3]. c) Ploščo bralnika prstnih odtisov dvignite z računalnika [4]. Nameščanje bralnika prstnih odtisov 1. Ploščo bralnika prstnih odtisov vstavite v režo na računalniku. 2. Privijte vijak M2L2,5, s katerim je bralnik prstnih odtisov pritrjen na računalnik. 3.
Kartica WLAN Odstranjevanje kartice WLAN 1. Upoštevajte navodila v razdelku Preden začnete delo v notranjosti računalnika. 2. Odstranite: a) b) c) d) Baterija optični pogon Tipkovnica Pokrov osnovne plošče 3. Odstranjevanje kartice WLAN: a) b) c) d) Odvijte vijak M2L3, s katerim je jeziček pritrjen na kartico WLAN [1]. Dvignite jeziček, s katerim je pritrjena kartica WLAN [2]. Izključite kabla kartice WLAN iz priključkov na kartici WLAN [3]. Kartico WLAN potisnite iz priključka na sistemski plošči [4].
b) Tipkovnica c) optični pogon d) baterijo 5. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. pomnilniški moduli, Odstranjevanje pomnilniškega modula 1. Upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. 2. Odstranite: a) b) c) d) baterijo optični pogon Tipkovnica pokrov osnovne plošče 3. Za odstranitev pomnilniškega modula: a) Sponki, ki varujeta pomnilniški modul povlecite tako, da pomnilniški modul izskoči [1].
3. Namestite: a) b) c) d) pokrov osnovne plošče Tipkovnica optični pogon Baterija 4. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Gumbasta baterija Odstranjevanje gumbaste baterije 1. Upoštevajte navodila v razdelku Preden začnete delo v notranjosti računalnika. 2. Odstranite: a) b) c) d) Baterija optični pogon Tipkovnica Pokrov osnovne plošče 3. S plastičnim peresom baterijo dvignite iz reže [1,2]. Nameščanje gumbaste baterije 1.
3. Namestite: a) b) c) d) Baterija Tipkovnica optični pogon Baterija 4. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Plošča gumba za vklop/izklop Odstranjevanje plošče gumba za vklop/izklop 1. Upoštevajte navodila v razdelku Preden začnete delo v notranjosti računalnika. 2. Odstranite: a) b) c) d) Baterija optični pogon Tipkovnica Pokrov osnovne plošče 3. Odstranjevanje plošče gumba za vklop/izklop: a) b) c) d) e) f) Odklopite kabel sistemske plošče iz računalnika [1].
Nameščanje plošče gumba za vklop 1. Ploščo gumba za vklop postavite na ohišje. 2. Pritrdite lepilni trak, s katerim je pritrjena plošča gumba za vklop. 3. Kabel sistemske plošče pritrdite na ohišje. 4. Ustrezno postavite ploščo gumba za vklop in privijte vijak [M2L2(Big head07)]. 5. Kabel sistemske plošče priklopite na ploščo gumba za vklop. 6. Privijte vijak (M2,5L8), s katerim jetečaj zaslona pritrjen na ploščo gumba za vklop. 7.
Nameščanje hladilnika 1. Vijake na hladilniku poravnajte z odprtinami za vijake na sistemski plošči. 2. Privijte štiri zaskočne vijake , da hladilnik pritrdite na sistemsko ploščo. OPOMBA Vijake pritrdite v zaporedju številk [1, 2, 3, 4]. 3. Namestite: a) b) c) d) Pokrov osnovne plošče Tipkovnica optični pogon Baterija 4. Upoštevajte navodila v razdelku Ko končate delo v notranjosti računalnika. Sistemski ventilator Odstranjevanje sistemskega ventilatorja 1.
Nameščanje sistemskega ventilatorja 1. Sistemski ventilator poravnajte z ohišjem. 2. Privijte vijaka M2L5, da sistemski ventilator pritrdite na računalnik. 3. Kabel priključka sistemskega ventilatorja priklopite na priključek na sistemski plošči. 4. Namestite: a) b) c) d) Pokrov osnovne plošče Tipkovnica optični pogon Baterija 5. Upoštevajte navodila v razdelku Ko končate delo v notranjosti računalnika. Zvočnik Odstranjevanje zvočnikov 1.
a) Odklopite kabel zvočnika iz računalnika [1]. b) Zvočnike odstranite iz računalnika [2]. Nameščanje zvočnikov 1. Zvočnike namestite v reže na računalniku. 2. Kabel zvočnika priključite na sistemsko ploščo. 3. Namestite: a) b) c) d) pokrov osnovne plošče Tipkovnica optični pogon baterijo 4. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Matična plošča Odstranjevanje sistemske plošče 1. Upoštevajte navodila v razdelku Preden začnete delo v notranjosti računalnika. 2.
a) b) c) d) e) f) g) h) priključek bralnika prstnih odtisov [1] priključek plošče gumba za vklop [2] odstranite lepilni trak [3] dvignite zaklepni jeziček in odklopite priključek eDP [4] priključek sledilne ploščice [5] zvočnik [6] V/I-priključek [7] priključek trdega diska [8] 4. Odvijte vijak M2L3, s katerim je sistemska plošča pritrjena na računalnik [1] in dvignite sistemsko ploščo [2].
5. Obrnite sistemsko ploščo. 6. Sistemsko ploščo odstranite tako: a) Odlepite lepilni trak [1]. b) Odklenite jeziček in odklopite napajalni kabel [2]. c) Sistemsko ploščo odstranite iz računalnika.
Nameščanje sistemske plošče 1. Priklopite napajalni kabel. 2. Prilepite lepilni trak. 3. Obrnite sistemsko ploščo. 4. Sistemsko ploščo poravnajte z odprtinami za vijake na računalniku. 5. Privijte vijak M2L3,da sistemsko ploščo pritrdite na računalnik. 6. Na sistemsko ploščo priklopite te kable. a) b) c) d) e) f) g) priključek trdega diska priključek sledilne ploščice priključek zvočnikov priključek V/I priključek eDP Priključek za napajanje priključek bralnika prstnih odtisov 7.
Vhodna/izhodna plošča Odstranjevanje vhodne/izhodne plošče 1. Upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. 2. Odstranite: a) b) c) d) e) baterijo optični pogon tipkovnico pokrov osnovne plošče sklop trdega diska 3. Odstranjevanje vhodne/izhodne plošče (plošče V/I): a) Odklopite kabel plošče V/I [1]. b) Dvignite in odstranite ploščo V/I iz računalnika [2]. Nameščanje vhodne/izhodne plošče 1. Ploščo V/I postavite na računalnik. 2.
d) optični pogon e) baterijo 4. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Vrata za napajalni priključek Odstranjevanje napajalnega priključka 1. Upoštevajte navodila v razdelku Preden začnete delo v notranjosti računalnika. 2. Odstranite: a) b) c) d) e) f) g) h) i) j) Baterija optični pogon Tipkovnica Pokrov osnovne plošče sklop trdega diska Kartica WLAN Pomnilniški modul Hladilnik Sistemski ventilator Sistemska plošča 3.
2. Z vijakom [M2x2 (z veliko glavo 07)] napajalni priključek pritrdite na računalnik. 3. Namestite: a) b) c) d) e) f) g) h) i) j) Sistemska plošča Sistemski ventilator Kartica WLAN Pomnilniški modul Hladilnik sklop trdega diska Pokrov osnovne plošče Tipkovnica optični pogon Baterija 4. Upoštevajte navodila v razdelku Ko končate delo v notranjosti računalnika. Sklop zaslona Odstranjevanje sklopa zaslona 1. Upoštevajte navodila v razdelku Preden začnete delo v notranjosti računalnika. 2.
4. Obrnite računalnik. 5. Odstranjevanje sklopa zaslona: OPOMBA Računalnik položite na rob ravne površine tako, da je zaslon obrnjen navzdol. a) Odvijte tri vijake M2,5L8, s katerimi je tečaj zaslona pritrjen na računalnik [1].
POZOR Pri delu z zaslonom LCD HUD bodite previdni in ga podpirajte z eno roko, z drugo pa odstranite vijake tečajev. b) Dvignite in odstranite sklop zaslona [2]. Nameščanje sklopa zaslona 1. Sklop zaslona poravnajte z ohišjem. 2. Kabel eDP priklopite na priključek na sistemski plošči in zaklenite zaklepni jeziček. 3. Prilepite lepilni trak, da pritrdite kabel eDP. 4. Kabel WLAN in kabel sklopa zaslona napeljite skozi jezičke za kabel. 5.
Okvir zaslona Odstranjevanje okvira zaslona 1. Upoštevajte navodila v razdelku Preden začnete delo v notranjosti računalnika. 2. Odstranite: a) b) c) d) e) f) Baterija optični pogon Tipkovnica Pokrov osnovne plošče Kartica WLAN Sklop zaslona 3. Odstranjevanje okvira zaslona: a) S plastičnim peresom sprostite jezičke na robovih, da okvir zaslona sprostite iz sklopa zaslona. b) Okvir zaslona odstranite s sklopa zaslona. Nameščanje okvira zaslona 1. Okvir zaslona namestite na sklop zaslona. 2.
Kamera Odstranjevanje kamere 1. Upoštevajte navodila v razdelku Preden začnete delo v notranjosti računalnika. 2. Odstranite: a) b) c) d) e) f) g) Baterija optični pogon Tipkovnica Pokrov osnovne plošče Kartica WLAN Sklop zaslona okvir zaslona 3. Odstranjevanje kamere: a) Kabel kamere odklopite s kamere [1]. b) Kamero odstranite s sklopa zaslona [2]. Nameščanje kamere 1. Kamero namestite v režo na sklopu zaslona. 2. Priklopite kabel kamere. 3.
g) Baterija 4. Upoštevajte navodila v razdelku Ko končate delo v notranjosti računalnika. Plošča zaslona Odstranjevanje plošče zaslona 1. Upoštevajte navodila v razdelku Preden začnete delo v notranjosti računalnika. 2. Odstranite: a) b) c) d) e) f) g) Baterija optični pogon Tipkovnica Pokrov osnovne plošče Kartica WLAN Sklop zaslona okvir zaslona 3. Odstranjevanje plošče zaslona: a) Odvijte vijake M2,5L8, s katerimi je plošča zaslona pritrjena na sklop zaslona [1].
Nameščanje plošče zaslona 1. Kabel eDP priklopite na ploščo zaslona. 2. Kabel zaslona pritrdite z lepilnim trakom. 3. Ploščo zaslona namestite na sklop zaslona. 4. Privijte vijake M2,5L8, s katerimi je plošča zaslona pritrjena na sklop zaslona. 5. Namestite: a) b) c) d) e) f) g) okvir zaslona Sklop zaslona Kartica WLAN Pokrov osnovne plošče Tipkovnica optični pogon Baterija 6. Upoštevajte navodila v razdelku Ko končate delo v notranjosti računalnika. Tečaji zaslona Odstranjevanje tečajev zaslona 1.
g) okvir zaslona h) ekran 3. Odstranjevanje tečajev: a) Odvijte šest vijakov M2,5L2,5, s katerimi sta tečaja zaslona pritrjena na sklop zaslona [1]. b) Odstranite tečaje zaslona [2]. Nameščanje tečajev zaslona 1. Privijte šest vijakov M2,5L2,5, s katerimi sta tečaja zaslona pritrjena na sklop zaslona. 2. Namestite: a) b) c) d) e) f) g) h) ekran okvir zaslona Sklop zaslona Kartica WLAN Pokrov osnovne plošče Tipkovnica optični pogon Baterija 3.
d) e) f) g) h) i) j) k) Pokrov osnovne plošče sklop trdega diska Kartica WLAN Pomnilniški modul Zvočnik Hladilnik Sistemski ventilator Sistemska plošča 3. Odstranjevanje podpornega nosilca za vijake: a) Odvijte vijaka M2L3, s katerima je podporni nosilec za vijake pritrjen na ohišje [1]. b) Dvignite podporni nosilec za vijake in ga odstranite [2]. 4.
5. Odstranjevanje plošče sledilne ploščice: a) Odlepite prevodne lepilne trakove [1]. b) Odvijte štiri vijake M2L2, s katerimi je plošča sledilne ploščice pritrjena na ohišje [2]. c) Dvignite ploščo sledilne ploščice in jo odstranite [3].
Nameščanje sledilne ploščice 1. Ploščo sledilne ploščice vstavite v režo. 2. Znova privijte štiri vijake M2L2, da ploščo sledilne ploščice pritrdite na ohišje. 3. Znova namestite prevodne lepilne trakove. 4. Podporni nosilec sledilne ploščice vstavite v režo. 5. Znova privijte tri vijake M2L3, da podporni nosilec sledilne ploščice pritrdite na ploščo sledilne ploščice. 6. Podporni nosilec za vijake vstavite v režo. 7. Znova privijte vijaka M2L3, da podporni nosilec za vijake pritrdite na ohišje. 8.
Nameščanje naslona za dlani 1. Namestite naslon za dlani. 2. Namestite: a) b) c) d) e) f) g) h) i) j) k) l) m) n) o) p) Sklop zaslona Sistemska plošča vrata napajalnega priključka Plošča V/I Zvočnik Sistemski ventilator Hladilnik Plošča gumba za vklop Pomnilniški modul Kartica WLAN bralnik prstnih odtisov sklop trdega diska Pokrov osnovne plošče Tipkovnica optični pogon Baterija 3. Upoštevajte navodila v razdelku Ko končate delo v notranjosti računalnika.
3 Tehnologija in komponente Procesorji Ta prenosni računalnik je dobavljen s procesorjem 6. generacije: • • Intel Celeron Serija Intel i5 OPOMBA Hitrost takta in učinkovitost delovanja se razlikujeta glede na delovno obremenitev in druge spremenljivke. Prepoznavanje procesorjev v operacijskem sistemu Windows 10 1. Tapnite Search the Web and Windows (Preišči splet in Windows). 2. Vtipkajte Device Manager (Upravitelj naprav). 3. Tapnite Processor (Procesor). Prikažejo se osnovne informacije o procesorju.
Prepoznavanje procesorjev v operacijskem sistemu Windows 7 1. Kliknite Start > Control Panel (Nadzorna plošča) > Device Manager (Upravitelj naprav). 2. Izberite Procesor. Prikažejo se osnovne informacije o procesorju. Preverjanje uporabe procesorja v možnosti Upravitelj opravil (Upravitelj opravil) 1. Pritisnite in držite opravilno vrstico. 2. Izberite Start Task Manager (Zaženi upravitelja opravil). Prikaže se okno Windows Task Manager (Upravitelj opravil sistema Windows). 3.
Prikažejo se podatki o delovanju procesorja. Preverjanje uporabe procesorja v možnosti Resource Monitor (Nadzor nad viri) 1. Pritisnite in držite opravilno vrstico. 2. Izberite Start Task Manager (Zaženi upravitelja opravil). Prikaže se okno Windows Task Manager (Upravitelj opravil sistema Windows). 3. Kliknite na zavihek Performance (Delovanje) v oknu Windows Task Manager (Upravitelj opravil sistema Windows). Prikažejo se podatki o delovanju procesorja. 4.
Prenašanje gonilnika za nabor vezij 1. Vklopite prenosni računalnik. 2. Obiščite spletno mesto Dell.com/support. 3. Kliknite Product Support (Podpora za izdelek), vnesite servisno oznako svojega prenosnika in kliknite Submit (Pošlji). OPOMBA Če nimate servisne oznake, uporabite funkcijo samodejnega zaznavanja ali pa ročno poiščite model svojega prenosnega računalnika. 4. Kliknite Drivers and Downloads (Gonilniki in prenašanje). 5. Izberite operacijski sistem, ki je nameščen na vašem prenosnem računalniku.
Prepoznavanje nabora vezij v Upravitelju opravil v operacijskem sistemu Windows 7 1. Kliknite Start → Control Panel (Nadzorna plošča) → Device Manager (Upravitelj opravil). 2. Razširite System Devices (Sistemske naprave) in poiščite nabor vezij. Gonilniki za Intelov nabor vezij Preverite, ali so gonilniki za Intelov nabor vezij že nameščeni na računalniku. Tabela 2.
Grafična kartica Ta prenosni računalnik je dobavljen z grafičnim naborom vezij Intel HD Graphics 520. Gonilniki za Intel HD grafiko Preverite, ali so gonilniki za Intel HD grafiko že nameščeni na računalniku. Tabela 3. Gonilniki za Intel HD grafiko Pred namestitvijo Po namestitvi Grafična kartica Intel HD 520 Grafična kartica Intel HD 520 (GT2) je vgrajena grafična enota, ki jo je mogoče najti v različnih procesorjih z izredno nizko napetostjo (ULV – Ultra Low Voltage) generacije Skylake.
Ključni tehnični podatki V spodnji razpredelnici so navedeni ključni tehnični podatki o grafični kartici Intel HD 520: Tabela 4. Ključni tehnični podatki Tehnični podatki Grafična kartica Intel HD 520 Koda Skylake GT2 Arhitektura Intel 6.
Vrtenje zaslona 1. Držite na zaslonu z namizjem. Prikaže se podmeni. 2.
Prilagajanje svetlosti v operacijskem sistemu Windows 10 Samodejno prilagajanje svetlosti zaslona omogočite ali onemogočite tako: 1. Podrsnite od desnega roba zaslona, da odprete meni središče za opravila. 2. Tapnite ali kliknite All Settings (Vse nastavitve) → Sistem → Zaslon. 3. Z drsnikom Samodejno prilagodi svetlost zaslona omogočite ali onemogočite samodejno prilagajanje svetlosti. OPOMBA Z drsnikom Raven svetlosti lahko svetlost prilagodite tudi ročno.
OPOMBA Več informacij najdete v dokumentaciji, ki je priložena vaši napravi za prikaz. Možnosti trdega diska Ta prenosni računalnik podpira pogone SATA in SSD. Prepoznavanje trdega diska v operacijskem sistemu Windows 10 1. Tapnite ali kliknite All Settings (Vse nastavitve) v čarobni vrstici operacijskega sistema Windows 10. 2. Tapnite ali kliknite Control Panel (Nadzorna plošča), izberite Device Manager (Upravitelj naprav) in razširite Disk drives (Diskovni pogoni).
• • S tipkovnico - pritiskajte F2, dokler se ne prikaže sporočilo Entering BIOS setup (Vstop v BIOS nastavitve). Za dostop d menija za izbiro zagona pritisnite F12. Brez tipkovnice - Ko se prikaže meni F12 boot selection (izbira zagona F12), pritisnite gumb za zmanjšanje glasnosti, da vstopite v BIOS nastavitve. Za dostop do menija za izbiro zagona pritisnite gumb za zvišanje glasnosti. Trdi disk je naveden pod System Information (Informacije o sistemu) v skupini General (Splošno).
USB 3.0/USB 3.1 1. generacije dosega veliko višje hitrosti zaradi spodnjih tehničnih sprememb: • • • Dodatno fizično vodilo, ki je dodano vzporedno z obstoječim vodilom USB 2.0 (glejte spodnjo sliko). USB 2.0 je imel pred tem štiri žice (napajanje, ozemljitev in par žic za diferencialne podatke). USB 3.0/USB 3.1 1. generacije ima štiri dodatne žice za diferencialne signale (sprejem in oddajanje), kar skupaj znaša kar osem povezav v priključkih in kablih. USB 3.0/USB 3.1 1.
Microsoft je objavil, da naj bi imel sistem Windows 7 podporo za USB 3.1 1. generacije; morda ne v prvotni izdaji, ampak s servisnim paketom ali posodobitvijo. Ni rečeno, da po uspešni uvedbi podpore za USB 3.0/USB 3.1 1. generacije v sistemu Windows 7 ne bo podpore za SuperSpeed tudi v sistemu Vista. Microsoft je to potrdil z izjavo, da je tudi večina njegovih partnerjev za podporo za USB 3.0/USB 3.11. generacije za sistem Vista. HDMI 1.4 Ta tema pojasnjuje HDMI 1.4 ter njegove lastnosti in prednosti.
25 % polne zmogljivosti (npr. ko je porabljenih 75 % baterije prenosne naprave). Funkcije kamere Ta prenosni računalnik je opremljen z naprej obrnjeno kamero z ločljivostjo 1280 x 720 (največ). Prepoznavanje kamere v Upravitelju opravil v operacijskem sistemu Windows 10. 1. V okno Search (Iskanje) vtipkajte device manager (upravitelj naprav) in tapnite, da ga začnete z iskanjem. 2. Pod možnostjo Device Manager(Upravitelj naprav) razširite Imaging devices (Naprave za zajemanje slik).
Prepoznavanje kamere v Upravitelju opravil v operacijskem sistemu Windows 7. 1. Kliknite Start > Control Panel (Nadzorna plošča) > Device Manager (Upravitelj naprav). 2. Razširi Imaging Devices (Zajemanje slik). Zagon kamere Za zagon kamere odprite program, ki uporablja kamero. Če na primer tapnete osrednjo programsko opremo za spletno kamero Dell ali odprete Skype, ki sta dobavljena s prenosnikom, se kamera zažene.
Značilnosti pomnilnika Ta prenosni računalnik podpira 4 GB do 16 GB, 2400 MHz DDR4 SoDIMM (2 reži) Preverjanje sistemskega pomnilnika Windows 10 1. Dotaknite se gumba Windows in izberite All Settings (Vse nastavitve) 2. Pod možnostjo System (Sistem) tapnite About (O sistemu). > System (Sistem) . Preverjanje sistemskega pomnilnika v nastavitvah 1. Vklopite ali znova zaženite prenosni računalnik. 2.
Tabela 6.
4 Sistemske nastavitve V sistemskih nastavitvah lahko upravljate strojno opremo in določite možnosti BIOS-a. V sistemskih nastavitvah lahko tudi: • • • • • spremenite nastavitve pomnilnika NVRAM, ko dodate ali odstranite strojno opremo, preverite konfiguracijo strojne opreme sistema, omogočite ali onemogočite vgrajene naprave, nastavite pragove delovanja in upravljanja porabe energije ter upravljate varnost računalnika.
Tipke Navigacija Esc Premika se na prejšnjo stran, dokler ni prikazan začetni zaslon. Če na začetnem zaslonu pritisnete tipko Esc, se prikaže sporočilo, ki vas pozove, da shranite morebitne neshranjene spremembe, in znova zažene sistem. Možnosti sistemskih nastavitev OPOMBA Prikaz elementov, navedenih v tem razdelku, je odvisen od računalnika in nameščenih naprav. Tabela 7. Zavihek Splošno Možnost Opis Informacije o sistemu V tem razdelku so navedene glavne funkcije strojne opreme vašega računalnika.
Možnost Opis • • Drives Disabled (Onemogočeno) AHCI – ta možnost je privzeto omogočena. Omogoča konfiguriranje vgrajenih pogonov SATA. Vsi pogoni so privzeto omogočeni. Možnosti so: • • SMART Reporting To polje nadzoruje, ali sistem med zagonom poroča o napakah pogona trdega diska za vgrajene pogone. Ta tehnologija je del specifikacije SMART (tehnologija analiziranja in poročanja notranjega spremljanja). Ta možnost je privzeto onemogočena. • USB Configuration SATA-0 – ta možnost je privzeto izbrana.
Možnost Opis System Password S to možnostjo lahko nastavite, spremenite ali izbrišete sistemsko geslo. OPOMBA Uspešna sprememba gesla se uveljavi takoj. Privzeta nastavitev: Not set (Ni nastavljeno) Internal HDD-0 Password Ta možnost omogoča nastavitev, spreminjanje ali izbris gesla za notranji trdi disk sistema. OPOMBA Uspešna sprememba gesla se uveljavi takoj. Privzeta nastavitev: Not set (Ni nastavljeno) Strong Password S to možnostjo lahko izberete možnost nastavitve samo močnih gesel.
Možnost Opis CPU XD Support S to možnostjo lahko omogočite način procesorja Execute Disable (Onemogoči izvajanje). Enable CPU XD Support (Omogoči podporo CPE XD) – privzeto Admin Setup Lockout S to možnostjo lahko uporabnikom preprečite odpiranje nastavitev, če je nastavljeno skrbniško geslo. Privzeta nastavitev: možnost »Omogoči zaklepanje nastavitve s skrbniškim geslom« ni izbrana. Tabela 11.
Tabela 13. Delovanje Možnost Opis Multi Core Support To polje določa, ali bo za postopek omogočeno eno jedro oziroma bodo omogočena vsa jedra. Delovanje nekaterih programov se bo izboljšalo z dodatnimi jedri. Ta možnost je privzeto omogočena. Ta možnost omogoča omogočanje ali onemogočanje večjedrne podpore za procesor. Nameščeni procesor podpira dve jedri. Če omogočite možnost »Večjedrna podpora«, sta omogočeni dve jedri. Če onemogočite Multi Core Support (Večjedrna podpora), je omogočeno eno jedro.
Možnost Opis Primary Battery Charge Configuration S to možnostjo lahko izberete način polnjenja baterije. Možnosti so: • • • • Prilagojeno. Standard (Standardno) — Popolnoma napolni baterijo pri standardni hitrosti. Primarily AC use (Primarno uporaba napajanja na izmenični tok) Custom (Po meri) Če izberete »Custom Charge« (Polnjenje po meri), lahko nastavite tudi možnosti »Custom Charge Start« (Začetek polnjenja po meri) in »Custom Charge Stop« (Konec polnjenja po meri).
Možnost Opis Wireless Device Enable S to možnostjo lahko omogočite ali onemogočite notranje brezžične naprave. • • WLAN Bluetooth Vse možnosti so privzeto omogočene. Tabela 18. Vzdrževanje Možnost Opis Servisna oznaka Prikazuje servisno oznako vašega računalnika. Asset Tag Omogoča vam, da ustvarite oznako sredstva računalnika, če oznaka še ni bila nastavljena. Ta možnost ni privzeto nastavljena. BIOS Downgrade To polje nadzoruje zamenjavo vdelane programske opreme s starejšimi različicami.
OPOMBA Izberite ustrezno kategorijo, da odprete stran izdelka. 5. Izberite model svojega računalnika in pojavila se bo stran Product Support (Podpora za izdelek). 6. Kliknite Get drivers (Prenos gonilnikov) in nato Drivers and Downloads (Gonilniki in prenosi). Odpre se razdelek Drivers and Downloads (Gonilniki in prenosi). 7. Kliknite Find it myself (Poiskal(-a) bom sam). 8. Kliknite BIOS, če si želite ogledati različice BIOS-a. 9. Poiščite najnovejšo datoteko za BIOS in kliknite Download (Prenesi). 10.
Brisanje ali spreminjanje obstoječega gesla za nastavitev sistema Preden poskušate izbrisati ali spremeniti obstoječe geslo za sistem in/ali nastavitev, se prepričajte, da je možnost Password Status (Stanje gesla) nastavljena na Unlocked (odklenjeno) (v nastavitvi sistema). Če je možnost Password Status (Stanje gesla) nastavljena na Locked (zaklenjeno), obstoječega gesla za sistem ali nastavitev ne morete izbrisati ali spremeniti.
5 Diagnostika izboljšanega predzagonskega ocenjevanja sistema (ePSA) Diagnostični postopek ePSA (oziroma diagnostika sistema) izvede celovit pregled strojne opreme. Postopek ePSA je vdelan v BIOS in se zažene znotraj BIOS-a.
6 Tehnični podatki OPOMBA Ponudba se razlikuje po regijah. Za več informacij o konfiguraciji vašega računalnika kliknite • Windows 10: kliknite ali se dotaknite Start sistemu). > Settings (Nastavitve) > System (Sistem) > About (Informacije o • Windows 8.1 in Windows 8 – v vrstici s čarobnimi gumbi kliknite možnost Nastavitve > Spremeni nastavitve računalnika ali se je dotaknite. V oknu Nastavitve računalnika izberite Računalniki in naprave > Informacije o računalniku.
Tabela 25. Tehnični podatki o shranjevanju Značilnost Tehnični podatki Trdi disk SATA 500-GB, 1-TB trdi disk SATA s 5400 in 7200 obr./min Tabela 26.
Značilnost Tehnični podatki OPOMBA Priključek USB 3.0 z napajanjem podpira tudi funkcijo Microsoft Kernel Debugging. Vrata so opisana v dokumentaciji, ki ste jo dobili z računalnikom. čitalnik pomnilniških kartic Ena reža SD Tabela 31.
Značilnost Teža Tehnični podatki 0,26 kg (0,56 funta) Življenjska doba 300 ciklov praznjenja/polnjenja Napetost 14,80 V enosmernega toka Temperaturno območje: Med delovanjem od 0 do 35 °C (od 32 do 95 °F) V mirovanju od –40 do 65 °C (od –40 do 149 °F) Gumbasta baterija 3 V litij-ionska gumbna baterija CR2032 Tabela 35.
Značilnost Tehnični podatki Nadmorska višina (največja): Med delovanjem Od –15,2 do 30482000 m (od –50 do 10.0006560 čevljev) 0–35 °C V mirovanju Raven onesnaženja zraka Od –15,2 m do 10.668 m (–50 do 35.000 čevljev) G1, kot ga določa ISA-S71.
7 Vzpostavljanje stika z družbo Dell OPOMBA Če nimate na voljo povezave z internetom, lahko podatke za stik najdete na računu o nakupu, embalaži, blagajniškem izpisku ali katalogu izdelkov Dell. Dell ponuja več možnosti spletne in telefonske podpore ter servisa. Razpoložljivost je odvisna od države in izdelka, nekatere storitve pa morda niso na voljo na vašem območju. Če želite vzpostaviti stik z Dellovo prodajo, tehnično podporo ali podporo kupcem: 1. Obiščite spletno mesto Dell.com/support. 2.