Owners Manual

7. Turn the system board over.
8. To remove the system board:
a. Remove the white adhesive tape [1].
b. Unlock the tab and disconnect the eDP cable [2, 3].
c. Disconnect the power cable [4].
d. Remove the system board from the computer.
Installing the system board
1. Connect power cable and eDP cable.
2. Replace the white adhesive tape.
3. Turn the system board over.
4. Align the system board with the screw holders on the computer.
5. Tighten the screws to secure the system board to the computer.
6. Close the hinge and tighten the screws to secure the system board to the computer.
7. Turn the computer over and open the computer and connect the optical drive cable and the touch pad cable to the system
board.
8. Install the:
Removing and installing components
27