Owners Manual

m. power connector

n. display assembly

3. To disconnect the display bezel:

a. By using a plastic scribe, release the tabs on the edges to release the display bezel from the display assembly [1].

b. Remove the display bezel display assembly [2].

Installing the display bezel

1. Place the display bezel on the display assembly.

2. Press the display bezel until it clicks onto the display assembly.

3. Install the:

a. display assembly

b. keyboard

c. WLAN card

d. I/O board

e. memory module

f. heat sink

g. base cover

h. coin cell battery

i. system board

j. power connector

k. battery

l. optical drive

4. Follow the procedure in After working inside your computer.

Removing the camera

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a. battery

b. optical drive

c. keyboard

d. base cover

e. hard drive assembly

f. optical drive

g. WLAN card

h. I/O board

i. memory module

Removing and installing components