Owners Manual

j. coin cell battery

k. heat sink

l. system board

m. power connector

n. display assembly

o. display bezel

3. To remove the camera:

a. Remove the tape that secures the camera cable [1].

b. Disconnect the camera cable from the camera [2].

c. Remove the camera from the display assembly [3].

Installing the camera

1. Install the camera into the slot on the display assembly.

2. Connect the camera cable.

3. Install the:

a. display assembly

b. display bezel

c. keyboard

d. WLAN card

e. I/O board

f. memory module

g. heat sink

h. base cover

i. coin cell battery

j. system board

k. power connector

l. battery

m. optical drive

4. Follow the procedure in After working inside your computer.

Removing the display panel

1. Follow the procedure in Before working inside your computer.

2. Remove the:

Removing and installing components